the 620 Posted May 9, 2011 Report Share Posted May 9, 2011 Friends ratsun such'm from mexico and I have a motor but I want aumetar L20B your comprecion but without compromising the engine as it is the 620 journal by the time an engine mounted between J18 and the way out that I have thought of installing petronix, mikunis 32 mm header and line 2 " I hope you can help me greetings the victim here Quote Link to comment
datzenmike Posted May 9, 2011 Report Share Posted May 9, 2011 Damn Google translator. Quote Link to comment
the 620 Posted May 9, 2011 Author Report Share Posted May 9, 2011 Damn Google translator. Jajaja my Englishman is not very good because of it translator uses of google Sorry That I can put pistons to increase the comprecion of the L20B? Quote Link to comment
jefe de jefes Posted May 9, 2011 Report Share Posted May 9, 2011 Que es lo que quieres hacer? Poner un motor l20b? Esta suave tu trokita. La caja no es original verdad? Quote Link to comment
the 620 Posted May 9, 2011 Author Report Share Posted May 9, 2011 Que es lo que quieres hacer? Poner un motor l20b? Esta suave tu trokita. La caja no es original verdad? o spanish lo que deseo hacer es aumentar la comprecion del motor L20B que tengo la camioneta aun tiene el j18 y la caja si es original asi salieron en mexico Quote Link to comment
jefe de jefes Posted May 9, 2011 Report Share Posted May 9, 2011 La camioneta tiene j18. Pero quieres alterar el motor para que corra como un L20b? Que no seria mas facil meter un L20b en vez de alterar el motor? Quote Link to comment
Skib Posted May 9, 2011 Report Share Posted May 9, 2011 are you wanting to do an L20B swap? Quote Link to comment
the 620 Posted May 9, 2011 Author Report Share Posted May 9, 2011 Let's forget j18 I want to know that pistons to put in the L20B that I have to increase his comprecion Quote Link to comment
Skib Posted May 9, 2011 Report Share Posted May 9, 2011 I want to know that pistons to put in the L20B that I have to increase his comprecion you can use some Z car L28 pistons. they are 1mm over bore (L28 piston = 86mm, stock L20B piston = 85mm) and flat top/ 0cc dish Quote Link to comment
the 620 Posted May 9, 2011 Author Report Share Posted May 9, 2011 you can use some Z car L28 pistons. they are 1mm over bore (L28 piston = 86mm, stock L20B piston = 85mm) and flat top/ 0cc dish You have the number of part ? Quote Link to comment
Skib Posted May 9, 2011 Report Share Posted May 9, 2011 have to get them out of a Z car L28 Nissan doesnt stock new ones Quote Link to comment
the 620 Posted May 9, 2011 Author Report Share Posted May 9, 2011 have to get them out of a Z car L28 Nissan doesnt stock new ones OK thank you very much That was the doubt Quote Link to comment
DAT510 Posted May 9, 2011 Report Share Posted May 9, 2011 casi no puedo escribeindo el espanol, perdon por si no entiendes. tienes el L20B correcto? quires mas compresion? alternativamente, puedes a cambiar la caveza a una que esta cerrado? Quote Link to comment
DAT510 Posted May 9, 2011 Report Share Posted May 9, 2011 have to get them out of a Z car L28 Nissan doesnt stock new ones you can alternatively swap heads for a closed one correct? i don't think there are Zs in mexico lol Quote Link to comment
Skib Posted May 10, 2011 Report Share Posted May 10, 2011 you can alternatively swap heads for a closed one correct? i don't think there are Zs in mexico lol theres 280ZX's in mexico. but a closed chamber head is another addition that will bump the CR Quote Link to comment
DAT510 Posted May 10, 2011 Report Share Posted May 10, 2011 theres 280ZX's in mexico. but a closed chamber head is another addition that will bump the CR whoa, had no idea. yea i just got through telling him that swapping to a closed head is an alternative, success :thumbup: Quote Link to comment
Skib Posted May 10, 2011 Report Share Posted May 10, 2011 whoa, had no idea. yea i just got through telling him that swapping to a closed head is an alternative, success :thumbup: its just a matter of how how you want your CR. flat tops and a closed chamber head will bump it way up. Quote Link to comment
]2eDeYe Posted May 10, 2011 Report Share Posted May 10, 2011 I was gonna say an A87 closed chamber head might be the easy compression increase. You guys got it covered :lol: Welcome aboard. :) Do you have a j18 or was that a google translation thing? If it's an L18 you might have the head to put on the L20 under the hood. Quote Link to comment
the 620 Posted May 10, 2011 Author Report Share Posted May 10, 2011 casi no puedo escribeindo el espanol, perdon por si no entiendes. tienes el L20B correcto? SI tengo uno para instalar quires mas compresion? si quiero mas comprecion alternativamente, puedes a cambiar la caveza a una que esta cerrado? 2eDeYe' date='09 May 2011 - 09:51 PM' timestamp='1304995909' post='473459']I was gonna say an A87 closed chamber head might be the easy compression increase. You guys got it covered :lol: Welcome aboard. :) Do you have a j18 or was that a google translation thing? If it's an L18 you might have the head to put on the L20 under the hood. engine j18 here one pic Quote Link to comment
banzai510(hainz) Posted May 10, 2011 Report Share Posted May 10, 2011 that motor looks solid,just keep it!!!!!!!!!I knows it slow but if you live in a area of bad roads who cares Quote Link to comment
DAT510 Posted May 11, 2011 Report Share Posted May 11, 2011 ok, he says he has a L20B to install, yet he wants more compression, can't tell if he wants more on the J18 or the L20B ignore this entonces quires mas comprecion en la J18 o el L20B? si tienes mucho comprecion en el L20, lo que puede pasar es dieseling, eso es cuando apagas el caro y todovia sigue correndo si quires mas comprecion en la J18, usando partes de la L20... no creo que va a servir Quote Link to comment
the 620 Posted May 11, 2011 Author Report Share Posted May 11, 2011 olvida el J18 quiero aumetar la del L20B solo con pistones nada mas Quote Link to comment
metalmonkey47 Posted May 11, 2011 Report Share Posted May 11, 2011 you can use some Z car L28 pistons. they are 1mm over bore (L28 piston = 86mm, stock L20B piston = 85mm) and flat top/ 0cc dish OR Z20 flattop pistons. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.