nathan_454 Posted December 5, 2010 Report Share Posted December 5, 2010 Im having some trouble finding a source for l20 head bolts, anyone know where i can find them, or have some kicking around? Quote Link to comment
Zeusimo Posted December 5, 2010 Report Share Posted December 5, 2010 2eDeYe' date='02 December 2007 - 03:46 PM' timestamp='1196639210' post='30422']**DATSUN FAQ** Frequently Asked Questions - Look here FIRST! Head bolts - cheapest I could find anywhere...local dealer wanted $120 for the L20 set....got a few extra with this and they're the turbo bolts... http://www.courtesyp.../-p-569146.html USE SEARCH!!! :angry: Quote Link to comment
datzenmike Posted December 5, 2010 Report Share Posted December 5, 2010 Better than USE SEARCH just RE-USE. They are designed to be re-used as long as undamaged. Just clean thoroughly and with an well oiled rag. If full out racing then yeah replace. For all else save the $120 for something important. Quote Link to comment
Zeusimo Posted December 5, 2010 Report Share Posted December 5, 2010 Hm.. Didn't Know That :unsure: Still A Japanese Newb I'm More Of A Chevy Guy :lol: Quote Link to comment
nathan_454 Posted December 5, 2010 Author Report Share Posted December 5, 2010 I have no problem re-using but one of mine is buggered up, I guess I could go up to the wrecking yard and pull some, was just curious if anyone had a source, that is all. Quote Link to comment
john510 Posted December 6, 2010 Report Share Posted December 6, 2010 If you have to have new ones part #11056-p7600 short bolt about 5 bucks on the courtesy nissan site,long bolt is part # 11059-p7600 about six bucks. Quote Link to comment
HRH Posted December 6, 2010 Report Share Posted December 6, 2010 Better yet, get a head stud kit from ARP. Only $98 if I remember correctly. Much better. Quote Link to comment
nathan_454 Posted December 6, 2010 Author Report Share Posted December 6, 2010 yeah I saw them for around 95 dollars, if funds allow i will go this route. its a stocker engine but studs would make for a bulletproof combo Quote Link to comment
Jester Posted December 6, 2010 Report Share Posted December 6, 2010 I thought I heard/read of the Z car turbo head bolts being used as an upgrade. Anyone confirm that? Quote Link to comment
HRH Posted December 6, 2010 Report Share Posted December 6, 2010 If it's just a stock motor, don't waste your money. Reuse your old ones, or go to the local pick and pull and rob the bolts out of another L. Stock compression doesn't need much to hold it down. Hit all the bolts on the wire wheel, chase the block holes with a tap, call it good. Quote Link to comment
metalmonkey47 Posted December 6, 2010 Report Share Posted December 6, 2010 Go to Nissan. I got my A-series head bolts for about $53. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.