inline4 Posted May 22, 2010 Report Share Posted May 22, 2010 where its supposed to be and what it looks like? thanks :) Quote Link to comment
HRH Posted May 23, 2010 Report Share Posted May 23, 2010 Why don't you take the leftover disc from your hole and measure it with a thickness guage. Or just find whatever scrap steel you have laying around that's roughly the same thickness. Or measure the edge of the hole with a pair of calipers. Or if the hole is small enough, just weld it up. Quote Link to comment
inline4 Posted May 23, 2010 Author Report Share Posted May 23, 2010 the disc is 2.5 inches wide, 500 miles away, but I'm gonna do something different. thanks. Quote Link to comment
inline4 Posted May 23, 2010 Author Report Share Posted May 23, 2010 It was thinner than 24 guage,,,,,,, but I can't remember, Dude; you should ask more than one question in each thread................ I'm going to start a thread called: "How Many?" First post: "Threads has inline4 created this month?" Second post: 18 Third post: "How many threads have more than 2 sentences in the first post?" Fourth post: Zero done and thanks :) Quote Link to comment
INDY510 Posted May 23, 2010 Report Share Posted May 23, 2010 I need to replace a hole I made in my firewall I bet I made a bigger hole than you did............... :P Quote Link to comment
metalmonkey47 Posted May 23, 2010 Report Share Posted May 23, 2010 I bet I made a bigger hole than you did............... :P Thats what she said Quote Link to comment
INDY510 Posted May 23, 2010 Report Share Posted May 23, 2010 How Many? Posts does each member have this month? ...... (May 1st----23rd, 2010) inline4: 137 metalmonkey: 215 indy510: 176 skib: over 200 in the last 10 days hang510: over 200 in 14 days DatzenMkie: over 200 in 14 days Quote Link to comment
metalmonkey47 Posted May 23, 2010 Report Share Posted May 23, 2010 metalmonkey: 215 If I catch up with skib, I need to get a life :( lol Quote Link to comment
INDY510 Posted May 23, 2010 Report Share Posted May 23, 2010 How many? Total posts on Ratsun in the last 9 days?............. = 3,192 ................... about 14.7 posts per hour Quote Link to comment
inline4 Posted May 23, 2010 Author Report Share Posted May 23, 2010 im sorry indy, if I didnt make so many threads, you'd probably have less posts.. and a smaller hole :) Quote Link to comment
datzenmike Posted May 23, 2010 Report Share Posted May 23, 2010 skib: over 200 in the last 10 days hang510: over 200 in 14 days These were JDM related.:lol: Quote Link to comment
inline4 Posted May 23, 2010 Author Report Share Posted May 23, 2010 thanks to my buddy JJ, I've got the drivers side seat in. the seat rails sit really close though, we might have to figure something out. The seats are really high, but I'm the only one driving it and I can finally see over the hood, so tough :) Quote Link to comment
hang_510 Posted May 24, 2010 Report Share Posted May 24, 2010 These were JDM related.:lol: JDM yo!!! post whores unite! :fu: gotta get paid for something :blink: Quote Link to comment
hang_510 Posted May 24, 2010 Report Share Posted May 24, 2010 is indy gonna make it to canby? Quote Link to comment
hang_510 Posted May 24, 2010 Report Share Posted May 24, 2010 What... is the air-speed velocity of an unladen swallow? 1 Quote Link to comment
Skib Posted May 24, 2010 Report Share Posted May 24, 2010 If I catch up with skib, I need to get a life :( lol Group: Moderators Active Posts: 7,655 (11.52 per day) Joined: 29-July 08 6,898 posts to go :fu: Quote Link to comment
Skib Posted May 24, 2010 Report Share Posted May 24, 2010 What... is the air-speed velocity of an unladen swallow? European or African swallow :lol: Quote Link to comment
INDY510 Posted May 24, 2010 Report Share Posted May 24, 2010 is indy gonna make it to canby? It all depends if the 710 makes it to Canby.............. It might break down a few times Quote Link to comment
hang_510 Posted May 24, 2010 Report Share Posted May 24, 2010 It all depends if the 710 makes it to Canby.............. It might break down a few times :huh: just leave a day early! :) im bringing my (TV repairman) tool box Quote Link to comment
inline4 Posted May 25, 2010 Author Report Share Posted May 25, 2010 :huh: just leave a day early! :) im bringing my (TV repairman) tool box wanna help me with my front suspension and the rear x member? :o Quote Link to comment
inline4 Posted May 25, 2010 Author Report Share Posted May 25, 2010 what should I do today? I have summer break. Quote Link to comment
hang_510 Posted May 25, 2010 Report Share Posted May 25, 2010 front suspension and rear X member??? Quote Link to comment
inline4 Posted May 25, 2010 Author Report Share Posted May 25, 2010 i've never done any of that stuff before. I need a walk through and to purchase the parts. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.