sick620 Posted February 17, 2010 Report Share Posted February 17, 2010 I will be painting my truck shortly. I am doing it on the cheap and I need to buy a air compressor. What size air compressor do I need? How much HP is needed? how many gallons? Do different tanks blow at different pressure? Remember I'm doing this on the cheap! Quote Link to comment
INDY510 Posted February 17, 2010 Report Share Posted February 17, 2010 . Most air guns have a minimum SCFM at a given psi. How big is the spray gun? Quote Link to comment
78kingcab Posted February 17, 2010 Report Share Posted February 17, 2010 first paint job.....wet sanding will be key here.....good luck Quote Link to comment
sick620 Posted February 17, 2010 Author Report Share Posted February 17, 2010 http://www.walmart.com/ip/IronForce-Spray-Gun-Kit/9189095 this is what im using i think Quote Link to comment
72240z Posted February 17, 2010 Report Share Posted February 17, 2010 I would rather buy a single better quality 60-100 dollar gun then a kit that just throws stuff in to pad it. Also consider renting a larger compressor just for the paint job. It's cheaper and easier then buying a sub par one and have to elbow grease out the difference. My .02 Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 5.9 average SCFM @ 40 PSI with a maximum pressure of 80 PSI. You'll need a compressor that can support this, or you will keep running out of air and have to stop spraying while the compressor catches up. and a regulator to control pressure going to the gun. good luck! Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 72240 posted as I was typing, renting sounds like a good option to spray the truck. Quote Link to comment
sick620 Posted February 17, 2010 Author Report Share Posted February 17, 2010 How many gallons would be efficient? Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 do you have 220V power in your garage? Quote Link to comment
sick620 Posted February 17, 2010 Author Report Share Posted February 17, 2010 ya. Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 quick search look like about 2HP 25 gallon is going to be the min. for you. Something like this, it will run on 120, but likes 220 better http://www.sears.com/shc/s/p_10153_12605_00919541000P?vName=Tools&cName=Air+Compressors+%26+Air+Tools&sName=Air+Compressors Quote Link to comment
72240z Posted February 17, 2010 Report Share Posted February 17, 2010 Ya and be careful with 220, single phase will turn your meter like mad. Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 ya, thats true..... one thing to keep in mind if you plan on buying a compressor, is that air tools like die grinders and other air motors use lots of air, so a small compressor like that one will not keep up, so you have to keep stopping all the time..... ask me how I know.... if you want to run air tools you'll need a bigger compressor. I sometimes add my autoX air tank in line with my compressor for a bigger tank, just takes longer to catch up. Quote Link to comment
Papi Chulo Posted February 17, 2010 Report Share Posted February 17, 2010 Spending $400+ on a compressor is not a cheap way to paint your car. Quote Link to comment
sick620 Posted February 17, 2010 Author Report Share Posted February 17, 2010 Spending $400+ on a compressor is not a cheap way to paint your car. haha. right? i can always get a cheaper brand one. and ill have it forever Quote Link to comment
420n620 Posted February 17, 2010 Report Share Posted February 17, 2010 if you don't want to buy another air compressor go buy one that is a 220v, 5 hp motor, 60 gallon tank. not one of those 5 hp motors that you don't have to change the oil, total junk and a waste of money. I've had mine for over 25 years and it's been the best investment, you just got to remember to change the oil as the manufacture recommends and change or blow out the filters every summer. Quote Link to comment
thisismatt Posted February 17, 2010 Report Share Posted February 17, 2010 Ya and be careful with 220, single phase will turn your meter like mad. Explain please. Power is power is power. Plus, the higher the voltage, the less current that is needed for the same amount of power, resulting in less parasitic loss from wire resistance turning your current into heat. Another thing - a 110v, 15 amp circuit equates to less than 2.5HP, so you can easily weed out any 110v compressors that say they are 2.5HP or more. I like the style of compressor (belt driven, oiled compressor, 2 piston) that greybeard linked and you can find them fairly cheap used. Mine is an older sears model that does something like 14CFM @ 90psi, 220v unit. I paid $180 for it. Quote Link to comment
thisismatt Posted February 17, 2010 Report Share Posted February 17, 2010 if you don't want to buy another air compressor go buy one that is a 220v, 5 hp motor, 60 gallon tank. not one of those 5 hp motors that you don't have to change the oil, total junk and a waste of money. I've had mine for over 25 years and it's been the best investment, you just got to remember to change the oil as the manufacture recommends and change or blow out the filters every summer. Agreed, although you may also consider getting a smaller main tank and daisy chaining additional tank(s) as to keep your compressor more mobile and cheaper. My compressor only has a 15gal tank, but I got a free 15gal tank from a dead oil-less (aka crap) compressor and put it inline to my main, which keeps my main easy to move for the times I've had to take it somewhere. There are dead compressors for dirt cheap or free all the time on craigslist...free air tanks! Also, I've found that running a good synthetic oil cuts way down on heat and noise (in other words, increases the efficiency) of the compressor. Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 I run that type also, got mine used, traded some used parts for it and replaced the motor... that was 25 years ago, still running and can do most of what I ask of it. Quote Link to comment
greybeard Posted February 17, 2010 Report Share Posted February 17, 2010 my computer is freeking out, double post sorry Quote Link to comment
420n620 Posted February 17, 2010 Report Share Posted February 17, 2010 so true matt, I didn't think about the moblie and yea, you can plumb into another tank to get more volume of air. :thumbup: Quote Link to comment
sick620 Posted February 17, 2010 Author Report Share Posted February 17, 2010 ive probably only got $200-$250 to spend on a compressor. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93271 would this one do me alright? Quote Link to comment
bob72gts Posted February 17, 2010 Report Share Posted February 17, 2010 http://www.walmart.com/ip/IronForce-Spray-Gun-Kit/9189095 this is what im using i think That looks like it might be a pretty good deal for a starter set. It is made by Campbell Hausfeld,and it comes with 2 pressure regulators. I have an old CH suction feed gun that I have used with good results. It is now my primer gun though since I got my DeVilbiss HVLP gun (cost about 3x what that set costs). They both will lay down a nice finish, but the DeVilbiss is easier to tune. Since this is your first paint job, no matter what gun you buy you should buy extra paint and do some test panels first. Most paint shops will have some mis-tinted paint laying around for cheap. That way you can get a feel for the gun without screwing up your truck if you don't spray perfectly on the first try. Having to sand off new paint SUX!!!! Spending $400+ on a compressor is not a cheap way to paint your car. That's true , but EVERY Ratsuner needs an air compressor Quote Link to comment
thisismatt Posted February 17, 2010 Report Share Posted February 17, 2010 ive probably only got $200-$250 to spend on a compressor. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93271 would this one do me alright? Dude, no. Just say no to harbor freight power tools. Plus, the air delivery rate on that compressor sucks ass. Look on craigslist! Quote Link to comment
sick620 Posted February 17, 2010 Author Report Share Posted February 17, 2010 thanks bob thats some good advice Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.