motavated

Looking through ebay I found this!!!!! http://cgi.ebay.com/1976-Datsun-Toyota-Courier-LUV-Pickup-Parts-Book_W0QQitemZ350094967714QQihZ022QQcategoryZ13564QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting It seems really old... But I wonder what happen too a whole wearhouse full of parts? 823 Milford st Glendale CA 91203 (213)-240-8800

there is on old Volvo in the yard with these type of carbs. I cant help you get them though... I'm busy with school and work.... Phone: (562) 404-2277 13780 Imperial Hwy Santa Fe Springs, CA 90670

What I did is I went to the yard got a block and bought warranty for it. Luckily the block was good when it was rebuilt. But if any problem occurred then I would of just returned it back with no questions asked. No matter what. It would cost around the same. But I don't like the shipping cost for an engine. It might be a little cheaper if you take it in yourself.

I think you must of connected them wrong. HE! I'll go check the color codes tomorrow but the colors codes are for a 620. My recommendation is to disconnect the fog lights and then plug in a fuse. If the fuse blows when the fog lights are disconnected, then its not the fog lamps...

I got one... I was about to junk it today... But I want to sell it as a set if you like. Headers, A87 "closed" head, l16 intake and a weber... The carb and head need a rebuild... Price? Let me know....

He needs the seal of approval!!!! OMG! You guys do such great work! Have you seen this video before? I should take my truck over there for body work ehhh!

This place right here can rebuild your own clutch if you want too. They resurface flywheels and can get any brand you want from American brands and Japanese. If you have a business, you get parts cheaper but only if you have this special coupon thing that business have. Its very remote and no one know about it... A.I.T.A Clutches.... In Compton!!! The Horror!!!! Give them a call.... You dont loose much with a simple call.... I got the original Nissan clutch from them for a good price..... http://www.manta.com/coms2/dnbcompany_7kvl19

I was just thinking about this and there sure is!!!! http://www.fulcrumsuspensions.com.au/SuperPro/superpro.html Look around this site. It has some not all bushings for this truck.... You have to order them through a Tien supplier.. Edit: You can only order the front strut bar bushings and rear leaf spring bushing. But you can supposedly use a cheaper alternative for the rear posted in the facts section.... http://forum.ratsun.net/showthread.php?t=2129

Hey hey HEY! I used to live there and have family living in Compton! :lol: Nah, But I have heard rumors from older people with Datsun. I have heard that in Compton around Rosecrans Ave there is a place that sells Datsun parts there new and cheap. Supposedly he knew people that knew some people that knew about this place. So is it still there? I don't know. I have not gone to investigate even though My father owns a house close to that area. This info came from some yard workers and there Datsun and there collections. They just love DATSUNS! For work or for play, Datsun is the way! This info was not just from one person but many. But I DONT KNOW!!!! I will try this place out though... I don't mind Compton at all! It's my home.... Nissan Parts North America, 745 West Artesia Boulevard, Compton Calif. 90220-5594

I guess your right... But I really don't mind helping people out and stuff. Datsun owner or not.... But that's just me... I currently have some ok stuff that I want to give away, but no one seems too want them... I guess I will just junk them on Tuesday. Ohh... Not to be a dick but Datsun parts for me is not a need... I DO need gas, food, and other crap. So that's why there so inflated... O well.... I'll shut up now.....

No... I have rare pieces but I will use them.... If I find a better part rare or not, then I will upgrade and sell the old ones... I don't buy to make a profit... I good Datsun enthusiast will help other Datsun enthusiast out... No? I will direct Datsun owners too cars with parts so they can help themselves. I have seen good people go to meets and sell there parts cheap so that other Datsun owners can enjoy there cars. But then people like jukeizm will buy them all up and sell them for double. Its an injustice... Jukeizm you can buy and sell parts all you want. Sooner or later people wont be able to afford Datsuns and you will have a warehouse full of junk.... You jukeizm have all the info in Parts/Datsuns. This gives you power so you can set any price. If you shared this info to the public you prices will drop. Such a greedy man. If your not making so much of a profit why not let us know were you get these parts from? Yes jukeizm I read your note... "if you dont have a lot of money maybe you should have stayed in school or maybe work 3 jobs or better yet get out of the datsuns and buy a bus card you dont seem very motavated.. lol" Jukeizm I go to school and I work. I don't ask money from no one nor do I beg. My truck is done so I don't need you or your parts. I built this truck with blood, sweat and tears. You just take advantage and buy Datsuns cheap from someone elses blood, sweet, and tears. So Work 3 jobs? Nah... This one is a Ratsun... I made it run with just a 10mm, 12mm and a crescent wrench... :fu: Here is my project progress... http://forum.ratsun.net/showthread.php?t=4057&highlight=motavated+project

I don't like this guys attitude. He first attacks us and call us liars and flips us off. Then he is caught and he gives a lame excuse. You should get kicked out just like Bill Clinton got impeached just for lying. And I do care that he resales parts for a profit. People need these parts for projects and we have little money. But that don't really matter here. We are Ratsun member's! We will fix our car another way much cheaper and better anyways... I would like a poll done so that the forum members will choose if jukeizm stay's or he goes... Who agrees?

Was one of your cars made to run on propane or natural gas? EDIT! I looked up LPG and it is!!!!! What was your mpg with that set up? HP? A NICE!!!!!

Your right. The reason I liked them was that it can cover more of a viewing area. But then again... I should keep the stock huge donkey ear'd ones...

why not these? 1967 mustang

[/url] These look like Mustang ones. I tried them out on my truck but you cant mount them... They need a little "ridge" as you can see for them to work... Since 620 door's don't have that ridge they would have to be mounted on the fender for them too work... If you want these cheep just look on line for Classic 1966 Mustang mirrors... I used the 720 ones...

If only you would of bought that bumper that day... It would of been done.... So unfair....

I knew you were going to use that sooner or later.... :lol:

Is that the historical plate from California? Shit I want one too!!!!

Does this look familiar? I dont know, but there ecu and turbos here... I know its not close too were you guys live, but I have my eyes open!!! http://losangeles.craigslist.org/sfv/pts/805397530.html http://losangeles.craigslist.org/sfv/pts/805380294.html http://losangeles.craigslist.org/sfv/pts/805422502.html

Novita your car looks sick!

I had stuff for sale in the past but chickend out since my truck still had many problems. Now she's almost done and well I want to sell the remaing parts I have... 620 driver door with window 10$... Has rust on the bottom OBO Short drive shaft for a 5 speed conversion for a 620. 20$ OBO A87 head closed "no water ports", l16 intake, header shorty "Trimil", 32/36 carb Weber, Powder coated valve cover, Intake header gasket, 200.00$ OBO The head and weber will need to be rebuilt btw.... l20 dizzy but not matchbox type. 10$ OBO 1978/79 front suspension with disks and calipers and arms etc... make offer Free 620 seat, l18 block and l20b block with chain covers. Only free if they are going to be used on there project/car. My name is Adam and I'm in the LA area. If you need something let me know and we can negotiate on the prices. Please note me... Some parts are local pickup only.... THANKS!!!!

I had that coil too and well after a while I just got confused.... I'm just happy that its running you know.... :lol:

I asked this question a while back but got scared and didn't take off the ballast.... http://forum.ratsun.net/showthread.php?t=3397 But I think PCD might know.... But I think he's at the meet... And you know what thats a good reference pic when connecting one back up again!!!!

Do you have to purge the system for air for these Datsun?