benzo

they are factory units that are sort of cut to fit. they can fit all models, 2dr,4dr and wagon. I used these on my wagon and they were great. the hardest part was getting the old ones out of the original location but once out the new ones install easy

189+shipping fees. i normally ship usps to save some to the buyer unless they really want to use ups. if anything i can also have them dropped shipped from ground control. I should be able to do different rates than what comes stock in their kits

new set of inner window squeegees. 30 for a pair nismo datsun horn button new. fits momo,nardi,sparco 50 new old stock or tokico hps HZ3003 and HE2572 160 for the set/sold Datsun shift knob new 50 hood latch cable set used 20 wagon gas filler inlet tube 20 I can also get new parts like tokico and ground control coilovers and such. inquire paypal accepted with paypal fees buyer pays for shipping email me at bull_ogna@hotmail.com or some pics are on my flickr account under benzo510 thank you

This is a awesome build Troy. looks totally purpose built and like the uniquness of it. Glad to see you are enjoying the fruits of your labor

I believe I am using the s10 block kit but have to look at the box again for the part #. the u bolts do work but are a tad wide but was able to fit over the axle and had to massage them in through the holes of the backing plate and the bolts are long but can be cut. the pin is a bit small but did keep axle from moving. not perfect but have not had issues for several years but have not seen any others that are any better fit wise or have heard of anything better. I have considered doing some rearched springs instead or if some blocks I saw in japan for trucks would work I may try those

I am using the bell tech ones and they work but not a perfect fit but while i was in japan i noticed a company selling blocks for trucks there and was and may buy a set and try and see how they fit

I lowered mine just 2" and that was sort of pushing it. I cut the bump stop and diff stop and it helped some but if you are going low you may have to do like others and cut the driveshaft tunnel and give it more room to clear the diff and driveshaft. personally I would not do this to such great cars but to each is their own. having it very low is mainly for looks and will not benefit much handling wise

dj aztek12 I can email you pics if you are interested in anything. Hang510. I have not been back to japan in a while. not as easy to bring stuff back from japan and parts are not cheaper.

OEM window channel felt new. 65.00 for the set. one pack will do two windows. will work on 2dr,4dr,wagons and some trucks OEM inner window squeegees 30.00 a pair Nismo Datsun horn button. will fit most momo and sparco or Nardi wheels. 40.00. new leather datsun shift knob with Datsun red/white/blue logo 40.00 NOS tokico HP shocks HZ3003/HE2572 140.00 set Momo horn button new. old school item 30.00 datsun 510 hood bumpers new 20.00/sold will be getting more from japan soon used hood latch cable assembly. 20.00 buyer pays for shipping. paypal accepted. I can email pics

I can look into this as I may be going back to japan and sometimes can order or find back issues of magazines there.

I guess I can say I have this motor setup. it was built by rebello racing for my friend when he owned the car. From what I remember he called it a long rod motor using ka pistons and his head work and dual 45 sk's and his cam. I can tell you it makes good power and torque for a street car and I can drive it well for san francisco streets. I have to use 91 octane all the time though. I am using a pertronix set up for it with a nissan comp header. it does idle decent and not bad for a carbed motor. I think this motor with fuel injection would be sweet or maybe just go KA motor with fuel injection.

Like the 510 shirt but would like one without the phrase just the car alone would be super clean. if you made it like that I would consider getting one

replaced my windshield wiper boots and added a breather tank.

That is a pretty looking wagon,goon,van. hope you keep it clean

this is a sweet gathering and nice pics.

yeah I am sure someone in your area has something.

sorry no. where is canby. sorry heard of it but never read the threads about it. if anyone from the bay area or close or passing through is going to it they are welcome to come and get these tires for you

I have a pair of advan tires in the size you want for 20 for the pair. the only thing is you would have to pay for shipping or if someone in the san francisco area is heading up your way can pick them up for you

bump

I can try to get it or have my friend pay for it and I can pick it up as may go to japan next month but it will cost you. I need to make some money for my time to do all of this and cover my friends time. if you want it let me know so I can have my friend try to get it.

try contacting pierce manifolds in gilroy california or fast freddy's.

to the top

a little sad I missed this gathering but was at the cherry blossom festival in sf. maybe I can make the next one

Try pierce manifolds in gilroy as they are a huge weber dealer. I don't know if fast freddy's in so cal still exists but look at them or try topend performance or maybe toysport or CB Performance. some of those bug places sell weber with good deals

Nice looking coupe. what spring set up are you using? maybe you can swap out spring rates for a better ride or if you are using ZX struts in front and did not mod them for mr2 inserts maybe go that route for a better ride. as for the rear rubbing if it is not rubbing much maybe consider going with a 195 sized tire or take a front wheel and move to rear to test. all in all very nice looking