imtb Posted January 5, 2009 Report Share Posted January 5, 2009 I am needing some inner window channel felt for a 71 510. This is the stuff that holds the windown in place when you roll it down. My window is rattling around and would like to fix it. Anybody have any ideas for where to locate or a good way to make one. thanks, mike Quote Link to comment
johnbureezu Posted January 5, 2009 Report Share Posted January 5, 2009 you can get it from Nissan. Still available in bulk rolls.:D Quote Link to comment
Madmax Posted January 5, 2009 Report Share Posted January 5, 2009 damn, my window has been loose in my race truck for years cause i didnt know they still sold that stuff....any part #'s by chance, my local dealer looks at me funny when i mention a 71 datsun.....i will also check online when i get home.... thanks again, you made my 09 Quote Link to comment
imtb Posted January 5, 2009 Author Report Share Posted January 5, 2009 Thanks for the response. I dont want to put my door panel back on until i fix it. what location or part no. I check Olympia Nissan and that didnt know of any. Quote Link to comment
hang_510 Posted January 5, 2009 Report Share Posted January 5, 2009 one of the best 'fixes' to do. amazing how quiet it is after. DLsocal, toointense and ebay have listings for it too. JC whitney has something avail, but dont use all rubber..its a PITA!!! Quote Link to comment
thisismatt Posted January 5, 2009 Report Share Posted January 5, 2009 H0335-89931 I believe one is enough for both sides of a 2 door. It's 5 meters long according to the package (yeah, I have a couple...ordered a 2nd set by mistake...whoops :D) Quote Link to comment
Madmax Posted January 5, 2009 Report Share Posted January 5, 2009 (edited) DLsocal had bad reviews...0 items for sale on ebay.... toointense sold for $65.... ebay was $89...not sure of seller.. nissan parts.cc sold rubber for $49... i am thinking toointense at this point....thanks for all the info boyz.... Edited January 6, 2009 by Madmax rewording Quote Link to comment
WagDatto Posted January 6, 2009 Report Share Posted January 6, 2009 I know there's been a fuss about Mike @ DLSocal, but I ordered from him no longer than a few months ago. Product came in only a few days after ordering, and he called to let me know that some people mistake inner/outer hatch seals, but assured me that they were labled correctly and not to instal them backwards. He's a great guy, but he and the bluebird list didn't get along. Quote Link to comment
hang_510 Posted January 6, 2009 Report Share Posted January 6, 2009 and he called to let me know that some people mistake inner/outer hatch seals, but assured me that they were labled correctly and not to instal them backwards. your welcome! (i notified him ~4 years ago that they were mislabeled :lol: ) sent me the replacement for the side i cut too short. after you meet him, then you can call him an ass :D the aftermarket chanel felt is ALL the same part#, from 1 supplier, get it for the lowest price! Quote Link to comment
ace0073 Posted January 8, 2009 Report Share Posted January 8, 2009 (edited) I called Nissan yesterday about the part number given: H0335-89931 Per the salesman it is still available but the price is $79. Not sure if different Nissan dealers have different prices but somewhere in this thread it says the Nissan price is in the $50 range. Edited January 8, 2009 by ace0073 typo Quote Link to comment
mtan2222 Posted January 8, 2009 Report Share Posted January 8, 2009 I called Nissan yesterday about the part number given: H0335-89931 Per the salesman it is still available but the price is $79. Not sure if different Nissan dealers have different prices but somewhere in this thread it says the Nissan price is in the $50 range. http://www.nissanparts.cc has it for $60 shipped (if it is even in stock) Quote Link to comment
hang_510 Posted January 8, 2009 Report Share Posted January 8, 2009 I called Nissan yesterday about the part number given: H0335-89931 Per the salesman it is still available but the price is $79. Not sure if different Nissan dealers have different prices but somewhere in this thread it says the Nissan price is in the $50 range. contact riley @ lynchburg nissan w/the part# Quote Link to comment
imtb Posted January 11, 2009 Author Report Share Posted January 11, 2009 I ended up getting it from Rod datsuns. He just sold it for one door so it was a little cheaper. I put it in and it turned out real nice. The rear vertical part I had to stop just below the top of the door. Couldnt figure it out how to get the old out with the window still in the door. Quote Link to comment
Madmax Posted January 12, 2009 Report Share Posted January 12, 2009 who is rod datsun and does he have contact or ordering info.... i put the glass back in one of my datsun this weekend temporarily and it was fun figuring out how it all went back together...lol...been a while since i messed with the door guts.... Quote Link to comment
imtb Posted January 12, 2009 Author Report Share Posted January 12, 2009 Here is the contact info. He charged me 33.00 for a 1/2 roll Rod 1-888-257-7773 http://www.rodsdatsun.com Quote Link to comment
ppeters914 Posted January 20, 2009 Report Share Posted January 20, 2009 Is the aftermarket stuff equal to, better, or worse than the stock Nissan stuff? Sorry, but can't tell from the comments. Btw, the prices listed at NissanParts.cc are nearly always out-of-date thus lower. Quote Link to comment
slodat Posted January 20, 2009 Report Share Posted January 20, 2009 I paid $48.75 from Riley at Lynchburg Nissan. Box being delivered today. Quote Link to comment
benzo Posted January 24, 2009 Report Share Posted January 24, 2009 I just contacted Riley at Lynchburg and bought window channel felt at 48.75 for two doors. He also sold me inner squeeges at 11.00 ea. not bad. he was very nice and helpful. let you all know when the parts arrive and the fit. Quote Link to comment
inline4 Posted January 25, 2009 Report Share Posted January 25, 2009 I just contacted Riley at Lynchburg and bought window channel felt at 48.75 for two doors. He also sold me inner squeeges at 11.00 ea. not bad. he was very nice and helpful. let you all know when the parts arrive and the fit. so thats everything that is needed to seal up the windows? I kinda want to paint the doors and seal things up so I can add power locks and windows :o Quote Link to comment
benzo Posted January 25, 2009 Report Share Posted January 25, 2009 for the most part. you should take a look at the outer squeegees and the door seals. if you want to add power locks and such I would for sure check the felt and squeegees inner and outer and change those at the time you take off the door panel. I know people also put sound deadening like dynamat inside the doors also if you wanna go that far Quote Link to comment
Madmax Posted January 26, 2009 Report Share Posted January 26, 2009 if anyone installs power windows, Please take pics and give feedback....i wonder how the universal cable kits compare to the direct drive kits....the direct drive kit i installed on a 66ford was sweet and smooth, but no one sells it for a datsun.....heard the cable kits are junk?????? Quote Link to comment
hang_510 Posted January 26, 2009 Report Share Posted January 26, 2009 if anyone installs power windows, Please take pics and give feedback....i wonder how the universal cable kits compare to the direct drive kits.... there are a few that have done it. contact kelvin on the BBlist, he has em on his wagon. remote accuated too. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.