mrbigtanker Posted September 4, 2020 Report Share Posted September 4, 2020 All, I have searched for awhile now and on this website, but with no luck. I need/want new strut/Tension rod bushings. Any help would be great. MOOG part # is K9218 but seems to be either back ordered or obsolete. 510 is K9215 but MOOG is out of stock until who knows when. Any other good sources parts or anyone with a stash they want to sell would be great. Quote Link to comment
mrbigtanker Posted September 5, 2020 Author Report Share Posted September 5, 2020 29 minutes ago, Greaser2 said: EBay? I did see these was hoping to get the k9218. Fuck it ill order these. 1 Quote Link to comment
Greaser2 Posted September 5, 2020 Report Share Posted September 5, 2020 Did u try Jegs 1 Quote Link to comment
mrbigtanker Posted September 5, 2020 Author Report Share Posted September 5, 2020 43 minutes ago, Greaser2 said: Did u try Jegs Yes Summit, even called MOOG direct, there parent company had only 5 in the warehouse. I need 8. The problem was i wanted the K9218 which is the 521 part number, the K9215 is for 510's but fuck it, it should work. 2 Quote Link to comment
wayno Posted September 5, 2020 Report Share Posted September 5, 2020 I cut down I believe late 620 tension rod bushings for my 521 work truck as is was the only thing available, it was good enough for the alignment shop, they didn't say anything and it drove great. I expect someone has what you need, you seem to have a unnatural nose for sniffing out rare parts. 2 Quote Link to comment
bilzbobaggins Posted September 5, 2020 Report Share Posted September 5, 2020 I ordered two sway bar link kits and used the bushing out of that. Then used the bolts to fix a gate to the backyard. 1 2 Quote Link to comment
mainer311 Posted September 5, 2020 Report Share Posted September 5, 2020 20 hours ago, bilzbobaggins said: I ordered two sway bar link kits and used the bushing out of that. Then used the bolts to fix a gate to the backyard. I did the same thing...well, except for the gate. They’re urethane and probably too stiff, but whatever. 1 Quote Link to comment
mrbigtanker Posted September 7, 2020 Author Report Share Posted September 7, 2020 On 9/5/2020 at 4:28 PM, mainer311 said: I did the same thing...well, except for the gate. They’re urethane and probably too stiff, but whatever. Thats what I was trying to avoid, so I ordered the K9215 510 ones. That will be fine for my low horsepower truck. 1 1 Quote Link to comment
mikec4193 Posted September 14, 2020 Report Share Posted September 14, 2020 Don't know if this is the correct part or not... https://www.summitracing.com/parts/mog-k9218?seid=srese1&gclid=Cj0KCQjwqfz6BRD8ARIsAIXQCf0PmXcwErhnRkQunqB-SMuC2SUgiPic7F9gXk9GJ78dwiBjYBB0C5EaAuzHEALw_wcB it is worth a shot I think... MikeC Quote Link to comment
mrbigtanker Posted September 15, 2020 Author Report Share Posted September 15, 2020 7 hours ago, mikec4193 said: Don't know if this is the correct part or not... https://www.summitracing.com/parts/mog-k9218?seid=srese1&gclid=Cj0KCQjwqfz6BRD8ARIsAIXQCf0PmXcwErhnRkQunqB-SMuC2SUgiPic7F9gXk9GJ78dwiBjYBB0C5EaAuzHEALw_wcB it is worth a shot I think... MikeC That is the number but MOOG is out for awhile. Called them direct. 1 Quote Link to comment
njp.18 Posted February 7, 2022 Report Share Posted February 7, 2022 On 9/6/2020 at 7:34 PM, mrbigtanker said: Thats what I was trying to avoid, so I ordered the K9215 510 ones. That will be fine for my low horsepower truck. did the 510 strut rod bushings work out fine for the 521? 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.