Dime Dave Posted November 11, 2008 Report Share Posted November 11, 2008 I am the current owner of the Quikskin molds. They are now in New Hampshire of all places. I recently arranged to have a composites shop start making parts from them again. The list of molds is extensive, but only a few components have been priced out to date. I have molds for BRE Bubble flares/front fenders, BRE Spooks with 360 degree brake ducts not the incomplete lower half only spoilers sold on Ebay and even the larger, full length quarter panel box flares like on the car below. I offer parts made in fiberglass with gelcoat and polyester resin in a wet lay-up process, fiberglass/epoxy resin vacuum bagged and carbon fiber/epoxy resin vacuum bagged. I can be contacted at dwpatten "at" gsnet.net for a complete list of available panels and a partial price list. FUTO FAB c/o Dave Patten Dunbarton, NH dwpatten "at" gsinet.net Quote Link to comment
banzai510(hainz) Posted November 11, 2008 Report Share Posted November 11, 2008 those are 3/4 rear box flairs?? start right from the door to the back There are smaller versions also right? You make those? Jim Cook racing still has a listing for the 510 IMSA box flares. Quote Link to comment
]2eDeYe Posted November 11, 2008 Report Share Posted November 11, 2008 Any plans for some 620 Carbon Fiber stuff? Quote Link to comment
Dime Dave Posted November 11, 2008 Author Report Share Posted November 11, 2008 (edited) I have 3/4 box flares as well, with or without gas filler door opening. Here is a partial list of the molds I have: Stock front fenders BRE Bubble flare front fenders and rivet/bond on rear flare lips BRE Spook w/360 degree ducts Dobi style airdam that uses a rubber lower lip Typical box flare fenders and 3/4 length rear box flares and air dam to fit Hoods, stock, cowl induction and bubble hood to fit an LZ24 under, all with or without bracing to accept stock hinges Trunk lid with or without full inner bracing for stock hinges Tail light panel, rear valance 2 peices or as one Door skins Dave Patten Edited November 11, 2008 by Dime Dave Quote Link to comment
Dime Dave Posted November 11, 2008 Author Report Share Posted November 11, 2008 Sorry, no plans for 620 parts. Quote Link to comment
banzai510(hainz) Posted November 11, 2008 Report Share Posted November 11, 2008 Dave be nice if you had a website otherwise people will forget that you have these. So we can link it somewhere on here. ClassicDatsun Motorsport supposed to have fiberglass also. but he gets them from someone else. Quote Link to comment
Dime Dave Posted November 11, 2008 Author Report Share Posted November 11, 2008 I will be partnering with a fellow 510 racer on his website once we are more pulled together. This is just starting out. I also offer a 56" wide CF wing designed for SCCA's GTL class. These are going to be available after December 1st. I will be posting info on the website on these parts as well. Good things take time. Dave P Quote Link to comment
hang_510 Posted November 11, 2008 Report Share Posted November 11, 2008 Dobi style airdam that uses a rubber lower lip Hoods, stock, cowl induction and bubble hood to fit an LZ24 under, all with or without bracing to accept stock hinges is the dobi whats on your car? pix if not... also wanna see the cowl hood w/bracing...i already have a LZ24 bubble in the steel hood Quote Link to comment
thisismatt Posted November 11, 2008 Report Share Posted November 11, 2008 Can you do ABS or urathane? Quote Link to comment
Dime Dave Posted November 11, 2008 Author Report Share Posted November 11, 2008 I can post pics of a stock hood, bracing would be the same. Give me a day or two. Sorry no ABS or Uretahne. Can do Carbon/Kevlar combo if durability is an issue. It will be stronger from an impact point of veiw. Dave Patten Quote Link to comment
Dime Dave Posted November 11, 2008 Author Report Share Posted November 11, 2008 Here is a link to a photo of what I call a "Dobi" style airdam. I believe this is John Roper's 4 dr. http://datsun510.com/photopost/data/3488/Picture_134s1.jpg Dave Patten Quote Link to comment
dat510sss Posted November 13, 2008 Report Share Posted November 13, 2008 Here is a link to a photo of what I call a "Dobi" style airdam. I believe this is John Roper's 4 dr. http://datsun510.com/photopost/data/3488/Picture_134s1.jpg Dave Patten Hi Dave I have tried to mail,but did not get through... Another email? -Rich Quote Link to comment
thisismatt Posted November 13, 2008 Report Share Posted November 13, 2008 Hi DaveI have tried to mail,but did not get through... Another email? -Rich His email is spelled differently twice in the first post...try the other? Quote Link to comment
Dime Dave Posted November 13, 2008 Author Report Share Posted November 13, 2008 Rich, Sorry for the screw-up. :blush: Correct E-mail is dwpatten "at" gsinet.net Quote Link to comment
dat510sss Posted November 13, 2008 Report Share Posted November 13, 2008 Rich,Sorry for the screw-up. :blush: Correct E-mail is dwpatten "at" gsinet.net You got mail.:) Quote Link to comment
thisismatt Posted November 13, 2008 Report Share Posted November 13, 2008 There's an edit button at the bottom right of the posts, Dave. Quote Link to comment
CorAce Posted November 20, 2008 Report Share Posted November 20, 2008 Dave, can you make the rear roll pan for a 2 dr? Quote Link to comment
rat tail dragger Posted November 20, 2008 Report Share Posted November 20, 2008 What no 620 stuff Quote Link to comment
Dime Dave Posted November 21, 2008 Author Report Share Posted November 21, 2008 (edited) Again, sorry, no 620 stuff, even though I do have a soft spot for those trucks. As for the 510 "Roll Pan" (must be a truck guy, car guys call them aprons or valances, but i won't hold it against you) I do have them, yet to be priced. I also have full tail light panels,(again yet to be priced). Here are some photos: Rear Valance Tail light panel mold with valance (and large box flare 1/4 panel molds) Edited November 21, 2008 by Dime Dave Quote Link to comment
Dime Dave Posted November 21, 2008 Author Report Share Posted November 21, 2008 I have started a photo album with pics of some panels and others of molds. Feel free browse: FUTO FAB Album [url=]http://tinyurl.com/5brea8[/url] Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.