Rasp933 Posted May 4, 2018 Report Share Posted May 4, 2018 What's up. Ratsun. Can someone tell me what are the torque spec on 73 610 flywheel with original 4 speed? Also the pressure plate bolt torque spec?? Thank you Quote Link to comment
Dolomite Posted May 4, 2018 Report Share Posted May 4, 2018 The flywheel is around 115ft lb if I remember correctly. Couldn’t tell you exact numbers for the pressure plate, I usually go reasonably tight with a ratchet. 1 Quote Link to comment
banzai510(hainz) Posted May 4, 2018 Report Share Posted May 4, 2018 pressure plate is less than 20. I think 12. Good time to get a "How to Rebuild your Datsun" book on Amazon How to Modify your Datsun is also a good book. all specs listed inbetween both books 1 Quote Link to comment
flatcat19 Posted May 4, 2018 Report Share Posted May 4, 2018 Yeah, use a torque wrench on the pressure plate. Flywheel not as important; just as long as it is tight. Red loctite is not a bad idea either. Should be like 12lb ft for the PP. Quote Link to comment
datzenmike Posted May 5, 2018 Report Share Posted May 5, 2018 Flywheel 101 to 116 ft lbs Pressure plate 11 to 16 ft lbs. Quote Link to comment
Pacific coast Datsun Posted May 5, 2018 Report Share Posted May 5, 2018 www.olddatsuns.com. has all the torque specs. Just did new flywheel bolts on my boat motor. 101 lbs is a must...trust me. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.