Mattndew76 Posted August 8, 2016 Report Share Posted August 8, 2016 Here is the holy grail of A12 turbo info ;) http://datsun1200.com/modules/mediawiki/index.php?title=%241200_EFI_Turbo_A12 1 Quote Link to comment
datzenmike Posted August 9, 2016 Report Share Posted August 9, 2016 HP and torque cross at 6K??? If it's to be believed torque (looks like 138?) X RPM / 5252 = 157 HP I'd say the graph is 1,000 RPM high. 1 Quote Link to comment
Mattndew76 Posted August 9, 2016 Author Report Share Posted August 9, 2016 It's not incorrect. Simon the fella that did the dyno work did pull these numbers. Quote Link to comment
Mattndew76 Posted August 19, 2016 Author Report Share Posted August 19, 2016 Another tip for the A12 crowd for more power. http://somender-singh.com/ Quote Link to comment
datsunfreak Posted August 29, 2016 Report Share Posted August 29, 2016 HP and torque cross at 6K??? If it's to be believed torque (looks like 138?) X RPM / 5252 = 157 HP I'd say the graph is 1,000 RPM high. HP and torque should always cross at 5252. Dynos just measure torque and then use the above formula to extrapolate horsepower. Horsepower is a fictional number based on that mathematical formula. ;) 1 Quote Link to comment
DaBlist Posted August 29, 2016 Report Share Posted August 29, 2016 Dynos just measure torque and then use the above formula to extrapolate horsepower. Horsepower is a fictional number based on that mathematical formula. ;) I just learned something. Watched lots of dyno pulls online and never heard that mentioned 1 Quote Link to comment
datzenmike Posted August 29, 2016 Report Share Posted August 29, 2016 Many dyno operators don't know this either. Like a cab driver.... "Bore and stroke??? Dunnow, I just drive this thing" . Quote Link to comment
drowning in broken cars Posted August 29, 2016 Report Share Posted August 29, 2016 To chime in, when looking at a dyno graph torque and hp dont always cross at 5252. They are always the same inherently at 5252. Where they cross depends on graph scaling. Quote Link to comment
datsunfreak Posted August 30, 2016 Report Share Posted August 30, 2016 looking at a dyno graph torque and hp dont always cross at 5252. They are always the same inherently at 5252. Yes, that's what I meant. They are always the same at 5252. Quote Link to comment
pdp8 Posted May 13, 2019 Report Share Posted May 13, 2019 So, I like the idea of a turbo A-series motor but I don't understand why people make it more complicated than it has to be. I see lots of people trying to make it work with carburettors and of course that's just not something that is naturally going to work out. Seems like it's either the extreme low-buck crowd or those folks who don't want to mess with a megasquirt setup. Then the megasquirt folks, seems like a good way to do it but gets complicated with all the bits and pieces. What I haven't seen is people doing it the easy way: The first mass-produced turbocharged car was the Saab 99. They used a Bosch Jetronic mechanical fuel injection. In it's essence it just uses a spring-loaded plate the air flows by as an air-mass sensor that moves a plunger that meters fuel to the injectors. Very like a variable-venturi carburettor but with the fuel added downstream, a natural fit for a turbo! You can make it work with just one wire to the fuel pump. Bonus points for a warm-up regulator (think choke), it's nice to have a fuel accumulator to aid warm-up, and a cold-start injector (also nice for dumping fuel during heavy boost) but it's really simple overall and you can grab the parts off any old Saab, Volvo, VW or whatever European car from the 70s or 80 you care to. No need to tinker with your ignition or so much as own a computer. Quote Link to comment
Tom1200 Posted May 14, 2019 Report Share Posted May 14, 2019 pdp8 there a several guys on Datsun1200.com who've had no issue with turbo/carb set ups; granted they aren't trying to get to the 200+ at the wheels that Simon has with his race coupe. A simple draw though with moderate boost seems to be the simplest / hassle free set up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.