Elkie Posted December 27, 2015 Report Share Posted December 27, 2015 Seen a few people asking about replacements. This is the solution I found. Overall I think I measured it to raise the cab ~1/4". Energy Suspension bushings 2x 9.4101 (2 per pack) 4 cab corners 1x 9.9531 (8 per pack) Core support This is the 9.4101 kit I run the big washer inside the cab, but here's a mounted pic. I ran a grinding wheel around the stock hole a few times to get it to slide in smoothly. For the front core support I used 9.9531 They are just round poly discs I added washers to. Mounted, the notched washer goes on top of core support. 5 Quote Link to comment
datson4life Posted December 27, 2015 Report Share Posted December 27, 2015 Thank you! 2 Quote Link to comment
flatcat19 Posted December 27, 2015 Report Share Posted December 27, 2015 Hm. Interesting. Have you driven on this stuff yet? Noisy? 2 Quote Link to comment
Elkie Posted December 27, 2015 Author Report Share Posted December 27, 2015 Never driven with them, truck has been a rather long project. 1 Quote Link to comment
thisismatt Posted December 27, 2015 Report Share Posted December 27, 2015 You can hear anything over an L motor rattle trap? 1 1 Quote Link to comment
flatcat19 Posted December 27, 2015 Report Share Posted December 27, 2015 What? 1 Quote Link to comment
Charlie69 Posted December 27, 2015 Report Share Posted December 27, 2015 These are what I purchased for my 520. The prices show a little cheaper on Nissan Parts Deal dot com. 4 Quote Link to comment
PHILDATSUN620 Posted December 27, 2015 Report Share Posted December 27, 2015 Hello are the mounts the same for a 1979 620 Datsun short bed pickup 1 Quote Link to comment
Charlie69 Posted December 28, 2015 Report Share Posted December 28, 2015 Do not know. Some of the #s above show as 720 bushings. Quote Link to comment
greenthumb Posted December 28, 2015 Report Share Posted December 28, 2015 Charlie69 Do these bushings also raise the cab like the OP? 1 Quote Link to comment
Charlie69 Posted January 7, 2016 Report Share Posted January 7, 2016 Cab probably sits a little higher as all I have to compare to is 40+ year old squashed bushings. Quote Link to comment
datzenmike Posted March 6, 2019 Report Share Posted March 6, 2019 On 12/27/2015 at 7:03 AM, PHILDATSUN620 said: Hello are the mounts the same for a 1979 620 Datsun short bed pickup yes 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.