Eriks Posted September 12, 2014 Report Share Posted September 12, 2014 Would like to know what wheels you are using. What rims, offset and tires will fit on an original 610 ? Quote Link to comment
Datsunawi Posted September 14, 2014 Report Share Posted September 14, 2014 I'm usung 195/14 turbines not sure what they came on originally, got them from a very good friend...car drives/feels much better with more rubber on the road. this is my dime :D imgurl image free hosting 1 Quote Link to comment
REDnGOLD Posted September 15, 2014 Report Share Posted September 15, 2014 American Racing Ansen Slots magfront: 13x6.5 0 offsetrear: 13x8 0 offsetUntitled by 6ameOvR, on FlickrYou can't go 15x8 0 offset (front) & 15x9 -10 offset (rear) I think that is the max but will require fender roll. Well, anything w/ 0 or negative offsets will require fender rolling & maybe some pullingWatanabes 3 Quote Link to comment
H20doctor Posted September 15, 2014 Report Share Posted September 15, 2014 Stock rims... with honeycomb hubvaps Quote Link to comment
datsun bluebird-u sss-e Posted October 28, 2014 Report Share Posted October 28, 2014 American Racing Ansen Slots mag front: 13x6.5 0 offset rear: 13x8 0 offsetUntitled by 6ameOvR, on Flickr You can go 15x8 0 offset (front) & 15x9 -10 offset (rear) I think that is the max but will require fender roll. Well, anything w/ 0 or negative offsets will require fender rolling & maybe some pulling Watanabes Lol Nice photoshop of my car. I run 15x8 -6 front, 15x9.5 -19 rear with a slight tire stretch and -3 camber no rubbing at all. Quote Link to comment
Eriks Posted April 4, 2015 Author Report Share Posted April 4, 2015 I'm considering Konig Rewinds 14x7 -9, but will they fit at the front ? Has anybody here tried these on their 610 ? Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 I'm considering Konig Rewinds 14x7 -9, but will they fit at the front ? Has anybody here tried these on their 610 ? Yes, and they fit quite nicely. :thumbup: Quote Link to comment
INDY510 Posted April 4, 2015 Report Share Posted April 4, 2015 if you have 280zx front struts .... :poke: ... they will stick out past the fenders with 610 front struts Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 if you have 280zx front struts .... Why would you not have those? :rofl: Quote Link to comment
bonvo Posted April 4, 2015 Report Share Posted April 4, 2015 i still have stock 610 struts lol Quote Link to comment
REDnGOLD Posted April 4, 2015 Report Share Posted April 4, 2015 I'm considering Konig Rewinds 14x7 -9, but will they fit at the front ? Has anybody here tried these on their 610 ? I have called around & looked around the web for those. I was told they dont make them any more. Where did you score those? Quote Link to comment
Eriks Posted April 4, 2015 Author Report Share Posted April 4, 2015 Found them here: http://unleashedwheels.com/konig-rewind.html So the wheels will NOT fit with 610 struts at the front? Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 Found them here: http://unleashedwheels.com/konig-rewind.html So the wheels will NOT fit with 610 struts at the front? What tire size? And define "fit". ^_^ With something like a 185/60-14, the tread will be just inside the fender lip and the wheel lip just a tiny bit outside the fender. Adding some negative camber will help. Or if you don't lower it, who cares. This is a 14x9 -25 on a stockish fender, with a 195/60-14 tire, so I find it hard to believe the Rewind won't fit and look decent. Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 These were 14x6 +9 with a 195/55-14 tire. These were 14x6 +5 with a 195/60-14 tire. 1 Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 16x7 Konig Rewinds with a 205/50-16 (and 280ZX struts) 1 Quote Link to comment
Eriks Posted April 4, 2015 Author Report Share Posted April 4, 2015 What tire size? And define "fit". ^_^ With something like a 185/60-14, the tread will be just inside the fender lip and the wheel lip just a tiny bit outside the fender. Adding some negative camber will help. Or if you don't lower it, who cares. This is a 14x9 -25 on a stockish fender, with a 195/60-14 tire, so I find it hard to believe the Rewind won't fit and look decent. OK thanks for the photo. I bought the rims now. If they do not fit I'll write back and ask you where to find a pair of 280zx struts :rofl: Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 15x8 +0 with a 195/50-15 tire on stock struts 2 Quote Link to comment
datsunfreak Posted April 4, 2015 Report Share Posted April 4, 2015 OK thanks for the photo. I bought the rims now. If they do not fit I'll write back and ask you where to find a pair of 280zx struts :rofl: You made the right decision. B) Quote Link to comment
REDnGOLD Posted April 4, 2015 Report Share Posted April 4, 2015 Found them here: http://unleashedwheels.com/konig-rewind.html So the wheels will NOT fit with 610 struts at the front? the link reads 14x7 ET 9. i didnt see -9. Quote Link to comment
ggzilla Posted April 5, 2015 Report Share Posted April 5, 2015 The wheels will fit. The question is how much they will stick out, and how narrow the tire will have to be. I think datsunfreak is right on with his description. Quote Link to comment
Eriks Posted April 5, 2015 Author Report Share Posted April 5, 2015 the link reads 14x7 ET 9. i didnt see -9. The actual et is -9. They just forgot the - Quote Link to comment
datsunfreak Posted April 5, 2015 Report Share Posted April 5, 2015 The actual et is -9. They just forgot the - Exactly. That's the only offset they were ever made in. The 15x7 and 16x7 are a zero offset, though. Quote Link to comment
datsunfreak Posted April 5, 2015 Report Share Posted April 5, 2015 Also, the wheels you get won't be a curved spoke like the ones on the website. That's a photo of a 15x7. For some odd reason the 14x7 and 16x7 have straight spokes, while the 15x7 is curved. 14x7 pic for reference: Quote Link to comment
Eriks Posted April 5, 2015 Author Report Share Posted April 5, 2015 Another one: Quote Link to comment
REDnGOLD Posted April 6, 2015 Report Share Posted April 6, 2015 take pix as soon as you get those wheels mounted. I've been eyeing that size since last year but i was told they didnt make those size anymore. I wanna see how it looks on the 610. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.