HAM8URGER Posted February 8, 2015 Author Report Share Posted February 8, 2015 I'm going to use this non-USDM 510 fender mirror as a door mirror on the dime. Quote Link to comment
HAM8URGER Posted February 8, 2015 Author Report Share Posted February 8, 2015 Also considering going with this throttle body. http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Product_Code=TB-SR20-80&Category_Code=IMTB Quote Link to comment
paradime Posted February 8, 2015 Report Share Posted February 8, 2015 Beautiful mirror, and a big improvement over those black plastic ones. One drawback is the angle of the hood mount puts them too low to be useful when mounted to the door. Maybe you could fab up some angle spacers that would rase them a bit? If you do that, make up an extra set and I'll buy them. ;) Quote Link to comment
HAM8URGER Posted February 16, 2015 Author Report Share Posted February 16, 2015 Well... I think we are now gonna go E85. The only thing I needed was a double pumper setup since the rest of the fuel system is beefy enough to support it. Lucky enough my brother in law Brock had a Dual Bosch 044 setup from his S14. I think I'm going to use the Haltech Flex Fuel Sensor in conjunction with the Platinum Sprint 500. 450+ WHP? I think so haha. The pump map will be super conservative but I think we'll just let it eat on E85. I know I know... Stock fenders? Traction problems? Meh... The corn tune will just be for novelty/power bragging Quote Link to comment
HAM8URGER Posted February 16, 2015 Author Report Share Posted February 16, 2015 I also had to get a new compressor housing in order to clock it to the correct position... Or I could have drill and tapped it but it would have looked better to get a new one. Just went with a Kinugawa Turbo Compressor Housing 1 Quote Link to comment
HAM8URGER Posted February 20, 2015 Author Report Share Posted February 20, 2015 My Sard oil cap finally arrived from the Japannn. Love me some engine bay bling 1 Quote Link to comment
HAM8URGER Posted March 26, 2015 Author Report Share Posted March 26, 2015 I haven't had much time to work on the 510 lately. Ive been focusing on finishing my shop and installing lift. Should be getting to the datto soon though... I have been playing around with the TOYOTA though 2 Quote Link to comment
DISLEXICDIME Posted March 26, 2015 Report Share Posted March 26, 2015 Nice hatch. I need a lift it would make working on my my gtx so much easyer Quote Link to comment
Stewiefied Posted March 27, 2015 Report Share Posted March 27, 2015 My recaros came today! Woohoo! They are pretty dirty but I'm gonna steam clean them. can I have these please?! lol 1 Quote Link to comment
HAM8URGER Posted April 13, 2015 Author Report Share Posted April 13, 2015 Rotated the compressor housing and my brother in law is starting to fab the downpipe Quote Link to comment
HAM8URGER Posted April 13, 2015 Author Report Share Posted April 13, 2015 Hammered the trans tunnel and squeezed in the KA 5 speed Quote Link to comment
HAM8URGER Posted April 14, 2015 Author Report Share Posted April 14, 2015 Got some really great condition headlight trim/fender finishers for auction on eBay right now http://pages.ebay.com/link/?nav=item.view&alt=web&id=291432789991 Quote Link to comment
solo Posted April 17, 2015 Report Share Posted April 17, 2015 Looking good man! Quote Link to comment
HAM8URGER Posted April 17, 2015 Author Report Share Posted April 17, 2015 Thanks! Slowly but surely we are getting there. Not rushing just working on it when we can every once in a while 1 Quote Link to comment
HAM8URGER Posted December 18, 2015 Author Report Share Posted December 18, 2015 Still not making much progress on the car.... Will probably get some stuff done over the Christmas holiday. Here's how she sits. Lots of dust accumulating in the bay :( 2 Quote Link to comment
HAM8URGER Posted December 18, 2015 Author Report Share Posted December 18, 2015 And got some SSR Starsharks from a buddy in Japan :) 14x7 -1 they even have those rare "shark" center caps 1 Quote Link to comment
ace028 Posted December 19, 2015 Report Share Posted December 19, 2015 Hamburger, ur setup is beautiful!! Give me motivation for my dime, kinda rethinking the sr20 plans I had now lol. Quote Link to comment
southern620 Posted December 22, 2015 Report Share Posted December 22, 2015 what are the specs on your shop (LxWxH) ? Quote Link to comment
HAM8URGER Posted December 22, 2015 Author Report Share Posted December 22, 2015 25'x40' with 14' ceiling 1 Quote Link to comment
HAM8URGER Posted December 22, 2015 Author Report Share Posted December 22, 2015 I would like a bigger building but It's adequate. Plenty of room for what I'm doing. Here's how it looks right now. Still need to add shelving and a table/bench. 2 Quote Link to comment
paradime Posted December 22, 2015 Report Share Posted December 22, 2015 Hang in there Hamburger, Monday marked the Winter Solstice, so tonight we are moving into the light of the new year. May 2016 be the year of rolling KA thunder. I look forward to seeing some progress again soon Bro. 1 Quote Link to comment
jesusno2 Posted December 23, 2015 Report Share Posted December 23, 2015 Im not totally sure that it matters a whole lot but looks like your radiator hoses are backwards. Quote Link to comment
paradime Posted December 23, 2015 Report Share Posted December 23, 2015 Im not totally sure that it matters a whole lot but looks like your radiator hoses are backwards. Those aren't the closed minded uni-directional hoses. They flow both ways. Quote Link to comment
HAM8URGER Posted December 24, 2015 Author Report Share Posted December 24, 2015 Shit... I just noticed that the hoses are backwards... You are right Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.