fragginfags Posted May 5, 2013 Report Share Posted May 5, 2013 Hey guys i just bought a boss kit, can someone give me a step by step guide on installing one, specifically to a datsun 720 Kingcab? Quote Link to comment
JoeCool Posted May 5, 2013 Report Share Posted May 5, 2013 I think you have no answers because we need more info. What's a "BOSS kit?" Quote Link to comment
datzenmike Posted May 5, 2013 Report Share Posted May 5, 2013 Goes on each front fender Quote Link to comment
RedBanner Posted May 5, 2013 Report Share Posted May 5, 2013 Steering wheel adapter yo..... Quote Link to comment
MikeRL411 Posted May 6, 2013 Report Share Posted May 6, 2013 Could have fooled me. I thought this was a Navajo code talker transmission. Quote Link to comment
Ratwagon1600 Posted May 6, 2013 Report Share Posted May 6, 2013 Boss kit, also Aussie slang for sports steeering wheel adapter. Basic how to follows: Park car. Align wheels so they face forward. Remove horn ringand/or centre cover so steering column nut is exposed. Undo nut from the column. Now comes the fun bit. Most column shafts have a tapered fit in the steering boss which causes them to be somewhat difficult to remove from the steering column. Best method here is to use the palms of your hands and belt the beejeebus out of the wheel at the 12, 6, 9 and 3 oclock positions. This will eventually break the taper and the old unit should then slide off. Before you fit the new boss kit and aftermarket wheel to the sterring column, make sure your horn adapter and contact point(s) for the horn are setup and ready to go. Reinstall wheel. n.b. There should be a small dimple on the steering column shaft indicating it is more or less centered (wheel alignments will affect the positioning of the steering wheel relevant to the position of the front wheels). Do up column nut nice and tight. Enjoy your new go fast steering wheel :thumbup: Dependent on how small a diameter you go with an aftermarket wheel, you may need to shorten your inidcator stalk accordingly. Quote Link to comment
datzenmike Posted May 6, 2013 Report Share Posted May 6, 2013 Boss kit, also Aussie slang for sports steeering wheel adapter. Basic how to follows: Park car. Align wheels so they face forward. Remove horn ringand/or centre cover so steering column nut is exposed. Undo nut from the column. Turn head to right or left so you don't knock front teeth out Best method here is to use the palms of your hands and belt the beejeebus out of the wheel at the 12, 6, 9 and 3 oclock positions. This will eventually break the taper and the old unit should then slide off. Before you fit the new boss kit and aftermarket wheel to the sterring column, make sure your horn adapter and contact point(s) for the horn are setup and ready to go. Reinstall wheel. n.b. There should be a small dimple on the steering column shaft indicating it is more or less centered (wheel alignments will affect the positioning of the steering wheel relevant to the position of the front wheels). Do up column nut nice and tight. Enjoy your new go fast steering wheel :thumbup: Dependent on how small a diameter you go with an aftermarket wheel, you may need to shorten your inidcator stalk accordingly. fixed.... Quote Link to comment
darrel Posted May 6, 2013 Report Share Posted May 6, 2013 Boss kit, also Aussie slang for sports steeering wheel adapter. Basic how to follows: Park car. Align wheels so they face forward. Remove horn ringand/or centre cover so steering column nut is exposed. Undo nut from the column. Leave nut on but unscrew a few turns, then continue below. This way the steering wheel won't knock your teeth out. Now comes the fun bit. Most column shafts have a tapered fit in the steering boss which causes them to be somewhat difficult to remove from the steering column. Best method here is to use the palms of your hands and belt the beejeebus out of the wheel at the 12, 6, 9 and 3 oclock positions. This will eventually break the taper and the old unit should then slide off. Before you fit the new boss kit and aftermarket wheel to the sterring column, make sure your horn adapter and contact point(s) for the horn are setup and ready to go. Reinstall wheel. n.b. There should be a small dimple on the steering column shaft indicating it is more or less centered (wheel alignments will affect the positioning of the steering wheel relevant to the position of the front wheels). Do up column nut nice and tight. Enjoy your new go fast steering wheel :thumbup: Dependent on how small a diameter you go with an aftermarket wheel, you may need to shorten your inidcator stalk accordingly. fixed, more better. Quote Link to comment
HRH Posted May 6, 2013 Report Share Posted May 6, 2013 On yanking old steering wheels, don't belt on it. Work it back and forth, side to side while pulling. Push one side, pull the other side 180 degrees from each other. Works like magic! There isn't a single steering wheel I couldn't get off by hand in the wrecking yard when I worked there. Quote Link to comment
RedBanner Posted May 6, 2013 Report Share Posted May 6, 2013 Or you can pull the nut of flush with the end of the shaft. And hit it with a mallet. I usualy aim for the "do not hit with a mallet" sticker. Pros use wheel pullers theres even a dimple for the tip in the shaft already. Quote Link to comment
JoeCool Posted May 6, 2013 Report Share Posted May 6, 2013 (edited) Or you can pull the nut of flush with the end of the shaft. And hit it with a mallet. I usualy aim for the "do not hit with a mallet" sticker. Sissies use wheel pullers theres even a dimple for the tip in the shaft already. Edited May 6, 2013 by JoeCool 1 Quote Link to comment
fragginfags Posted May 6, 2013 Author Report Share Posted May 6, 2013 Woah cheers guys, i had to post this at school because we lost 99% of the stuff in the 2013 floods, so i havnt had internet but cheers guys :) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.