Jermyz33 Posted May 17, 2012 Report Share Posted May 17, 2012 Bout damn time! haha after I spent 3.5 hours putting your engine and trans back in... Now go to the project datto section and make a build thread! or find mine! Right? It took so long to get the confirmation email i gave up and tried a new account with a new email and here i am lol. screw hotmail! And thank you sir :) I will start the build thread once i get it home and start photowhoring like i always do lol. Quote Link to comment
Alex Datsun Posted May 17, 2012 Report Share Posted May 17, 2012 Looking good! Other than paint what else did you have planned? Well paint is on the last of my list since my fenders/hood/lip is mangled, an fitting everything, wheels (already know what wheels), painless wire kit, zforce/azc rear crap, and eventually awesome steering angle mod but im indecisive....after all that then ill do paint. Quote Link to comment
arck001 Posted May 18, 2012 Report Share Posted May 18, 2012 that looks awesome! What are the specs? And how much camber. Im trying to fit 16x9 -5 up front and 16x10 -25 in the rear any info would be super helpful lol. F 16x8 -35 R 16x10 -30 camber -5 The fronts should fit with no problem. The rears are going to require a pull. Quote Link to comment
Alex Datsun Posted May 22, 2012 Report Share Posted May 22, 2012 And people were saying 16's look donkish on a Z....pleeeaassseee... Quote Link to comment
Pasquale Posted May 22, 2012 Report Share Posted May 22, 2012 15's almost look too small IMO. I think 16 are just right coupled with a stretched tire. Quote Link to comment
Unfriendly Garage Posted May 22, 2012 Report Share Posted May 22, 2012 Ended up going white. Swapped out the na-zx hood vents for a set of my own vents, ford explorer side skirts, another wood vinyl on the cowl. I'll have better pics of everything soon. :-) 1 Quote Link to comment
Jermyz33 Posted May 22, 2012 Report Share Posted May 22, 2012 O_o Ford Explorer side skirts? Details please? Because those look awesome Quote Link to comment
voltron_boi Posted May 25, 2012 Report Share Posted May 25, 2012 Before After Now ? (coming soon) 05/19/2012 Remember that "?". Here is how it looks now. Picture from the show that other member had took of my car. 1 Quote Link to comment
Jermyz33 Posted May 25, 2012 Report Share Posted May 25, 2012 Whoa thats yours now!? What part of sacramento are you in? I'd love to photoshoot that car! Quote Link to comment
ryknot Posted May 26, 2012 Report Share Posted May 26, 2012 Are you guys not required to run an outside mirror in Calif.? Here in Wash. I beleive the law is 2 mirrors, in any combination. Just curious as I see alot of oics of cars from down there not running an outside mirror. Beautiful Z by the way. Very tasteful. Quote Link to comment
Jermyz33 Posted May 26, 2012 Report Share Posted May 26, 2012 I may be mistaken but I THINK its driver side + rear view is fine, but it might be rear view + any side. I know you only need 2 tho. Quote Link to comment
Alex Datsun Posted May 26, 2012 Report Share Posted May 26, 2012 its just aslong as you have a side mirror and a rear view mirror....dude that thing is hot Quote Link to comment
DAT510 Posted May 26, 2012 Report Share Posted May 26, 2012 That was yours!!! I knew i recognized it!! Quote Link to comment
Busta Nut Posted May 26, 2012 Report Share Posted May 26, 2012 That looks f'in clean!! Nice job!! :thumbup: Quote Link to comment
ArchetypeDatsun Posted May 27, 2012 Report Share Posted May 27, 2012 Ended up going white. Swapped out the na-zx hood vents for a set of my own vents, ford explorer side skirts, another wood vinyl on the cowl. I'll have better pics of everything soon. :-) Looks awesome man! Quote Link to comment
TheMission Posted May 27, 2012 Report Share Posted May 27, 2012 Great shot someone else took at a Drift Event - 1 Quote Link to comment
datrod Posted May 28, 2012 Report Share Posted May 28, 2012 Under the hood just for Shit's & Giggles. Take a close look at the fuel rail. I just finished it up this weekend... O.K. it's not that great, But I dig it. I know it needs to be lower but I drag the ground enough as it is. Quote Link to comment
Jermyz33 Posted May 28, 2012 Report Share Posted May 28, 2012 Looks good, that engine bay shot is great! Quote Link to comment
2JZ260z Posted May 31, 2012 Report Share Posted May 31, 2012 What kind of coating is that on the valve cover? I wanted to do that to my 2JZ Valve covers, but IDK wtf that is. I think the hondas/ferrari's have a similar texture Quote Link to comment
Npdavies. Posted May 31, 2012 Report Share Posted May 31, 2012 What kind of coating is that on the valve cover? I wanted to do that to my 2JZ Valve covers, but IDK wtf that is. I think the hondas/ferrari's have a similar texture I think it's a wrinkle powdercoat. But I could be wrong. Quote Link to comment
datrod Posted May 31, 2012 Report Share Posted May 31, 2012 Looks good ARCK but how do you keep the air dam on. Mine is about 3" off the groung and it hits everything.... Quote Link to comment
Jermyz33 Posted May 31, 2012 Report Share Posted May 31, 2012 I think it's a wrinkle powdercoat. But I could be wrong. What kind of coating is that on the valve cover? I wanted to do that to my 2JZ Valve covers, but IDK wtf that is. I think the hondas/ferrari's have a similar texture It looks very similar to an STi's intake manifold crinkle coat red. You can powdercoat it that way or i believe they actually have high temp spray paint that produces a similar result! Quote Link to comment
Jermyz33 Posted May 31, 2012 Report Share Posted May 31, 2012 so sick! fapfapfap Quote Link to comment
TheMission Posted June 7, 2012 Report Share Posted June 7, 2012 Took a few shots around the Gorge today - 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.