trackwhore Posted February 1, 2013 Report Share Posted February 1, 2013 I was doing a tune up on my truck today and noticed something i havent really seen before. my valve cover has a big Z on it, so i was wondering does that mean i have a Z motor in my datsun? Quote Link to comment
Eagle_Adam Posted February 1, 2013 Report Share Posted February 1, 2013 im going to assume your talking about your 720, and if thats the case you dont have a Z car motor you have a NapsZ motor Quote Link to comment
bilzbobaggins Posted February 2, 2013 Report Share Posted February 2, 2013 Prolly have a napz motor. And where are you in Georgia? And where are your oics of your truck? And WELCOME to the greatest show on the earth!! Quote Link to comment
datsunaholic Posted February 2, 2013 Report Share Posted February 2, 2013 Z-car engines are 6 cylinders. Nissan-Z just means you have a Z-series (aka NAPS-Z) engine. Most likely a Z22, as that was the stock engine for 1981. And no, just because you have 8 spark plug wires doesn't mean it has 8 cylinders. (Yes, someone asked that before). The dual spark plugs plus the design of the cylinder head and the no-pump Air Injection system was all part of the NAPS (Nissan Anti Pollution System), which was to achieve the mandated EPA (and Japanese) Emissions Standards of the time, and as a replacement for the somewhat more HP-robbing smog-pump system used in earlier engines. Quote Link to comment
Alec 720 Posted February 2, 2013 Report Share Posted February 2, 2013 You mean this Z? :devil: Yup... Nissan Z22 engine. Quote Link to comment
Scurrvy Posted February 2, 2013 Report Share Posted February 2, 2013 You mean this Z? :devil: Yup... Nissan Z22 engine. I wish the z24s looked like this. Quote Link to comment
datzenmike Posted February 2, 2013 Report Share Posted February 2, 2013 You can swap the cast Z20/22 valve cover for the stamped steel Z24 one. You need to use the longer Z22 cover bolts. 1 Quote Link to comment
ColtonMelson Posted February 2, 2013 Report Share Posted February 2, 2013 I wish the z24s looked like this. I second that!!!! Quote Link to comment
Scurrvy Posted February 2, 2013 Report Share Posted February 2, 2013 Oh really?: I may look for one then. Quote Link to comment
_chiefjt Posted February 3, 2013 Report Share Posted February 3, 2013 Yeah, they are interchangeable but the only downside is, is that the z22 valve cover doesn't have the plug wire holders. I've been looking for a long time. Finally found one and the next day it was gone. Pretty pissed. Quote Link to comment
Alec 720 Posted February 4, 2013 Report Share Posted February 4, 2013 I have another valve cover but the steel for the valve is rusted out.... I have 3 Z22's so there has got to be another valve cover... but I dunno.. Quote Link to comment
Mr.Dean_Yates Posted February 7, 2013 Report Share Posted February 7, 2013 I have a z22 vc on my 24. Looked a lot better Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.