71datsuns Posted October 14, 2012 Report Share Posted October 14, 2012 So tonight I took my 521 downtown to get some good shots. This is what I came up with! I finally got the fender mirrors on and the brand new hood emblem!! Shes coming along nicely! Next weekend, re-indexing the torsion bars to get the front a little lower. Enjoy!! 3 Quote Link to comment
metalmonkey47 Posted October 14, 2012 Report Share Posted October 14, 2012 Nice man!! IMO drop it 1 inch all the way around,and call it a day. Looks great either way! :thumbup: Quote Link to comment
ruckycharms Posted October 14, 2012 Report Share Posted October 14, 2012 Dude nice shots man! keep em coming. :thumbup: Quote Link to comment
MicroMachinery Posted October 14, 2012 Report Share Posted October 14, 2012 #3 + #4 without the running lights. Quote Link to comment
mklotz70 Posted October 14, 2012 Report Share Posted October 14, 2012 Nice work. I like it. I agree with Micro, but I really like the backdrops in those to. I didn't even know about the Heritage Center. What kind of equipment are you using? Quote Link to comment
mrbigtanker Posted October 14, 2012 Report Share Posted October 14, 2012 Looks good.Although it looks like the mirriors are in my opinion a little to forward.When i mounted my mirriors i did it right over the front side of the fender well like the other trucks in Japan.It still looks good though keep up the good work and another 521 saved. Quote Link to comment
71datsuns Posted October 14, 2012 Author Report Share Posted October 14, 2012 I appreciate the constructive criticism! I agree with the 1" all the way around metalmonkey! And thanks for all the props! I just found out about the Heritage center last night too! I'm using a Sony A350 with a 35mm lense, most of the photos i left the shutter open for around 8 to 10 seconds, thats why the lights are so vibrant. Also using a tripod, I cant stay that steady for 10 seconds. lol. Thanks again guys! I cant wait to go to some datsun meets! Quote Link to comment
mklotz70 Posted October 14, 2012 Report Share Posted October 14, 2012 On a long exposure like that, you should be able to fire off the flash in the middle of it to expose the foreground and it will not have any affect on the background all all. You have to figure out the two exposures differently and most likely compensate a bit for the extended exposure on the foreground. Basically, under expose the flash just a bit since the ambient light will add some too it. You could probably just bracket several exposures and get really close. Some cameras have an option to fire the flash on a long exposure. Quote Link to comment
skyblue Posted October 15, 2012 Report Share Posted October 15, 2012 nice shots man. looking good. 1inch wont make that much of a difference. i would start with 2inches, but that's just me.i like 'em low. Quote Link to comment
71datsuns Posted October 15, 2012 Author Report Share Posted October 15, 2012 nice shots man. looking good. 1inch wont make that much of a difference. i would start with 2inches, but that's just me.i like 'em low. I like them low too. I want the wheel to be right at the fender, I already have 3" blocks on the back and I heard that bigger blocks do something to the axle? Quote Link to comment
skyblue Posted October 15, 2012 Report Share Posted October 15, 2012 for blocks bigger than 3in you have to raise the carrier bearing. some guys suggest putting a piece of 1in square tubing between the frame and carrier bearing otherwise it's too much stress on the bearing and could kill it. Quote Link to comment
71datsuns Posted October 15, 2012 Author Report Share Posted October 15, 2012 Ah i got ya! Thanks for the info. Ill look into that! Quote Link to comment
pl521sss Posted October 15, 2012 Report Share Posted October 15, 2012 Nice shot I like factory blue paint You must not have a reverse light Bulb socket is hanging out I think its common on 521 Here's what I did on bearing carrier spacer. http://community.ratsun.net/topic/2151-project-skunk-works-iii/page__hl__%20project:%20%20skunk%20%20works__st__80 Quote Link to comment
71datsuns Posted October 16, 2012 Author Report Share Posted October 16, 2012 DUDE! Thanks for the link! So 3/4 inch spacer for the bearing carrier is a good spacer size for 5" blocks? Now, would I have to do anything else? Or is it just the bearing carrier spacer and 5" blocks? I noticed in the link you were fooling around with the leafs a bit. I would have to remove any would I? Thanks for the help PL. Quote Link to comment
71datsuns Posted October 16, 2012 Author Report Share Posted October 16, 2012 Although it looks like the mirriors are in my opinion a little to forward. This is kinda the photo I went off of. To me this looks like a 521 thats pretty close to factory original. But to each their own. Were all different. Quote Link to comment
skyblue Posted October 16, 2012 Report Share Posted October 16, 2012 if u use 5in blocks u will have to notch the frame. otherwise the axle will be slappin' da frame. Quote Link to comment
mrbigtanker Posted October 16, 2012 Report Share Posted October 16, 2012 This is kinda the photo I went off of. To me this looks like a 521 thats pretty close to factory original. But to each their own. Were all different. OK Quote Link to comment
71datsuns Posted October 16, 2012 Author Report Share Posted October 16, 2012 which I actually think mine are still a hair more toward the front than this one. Quote Link to comment
71datsuns Posted October 16, 2012 Author Report Share Posted October 16, 2012 if u use 5in blocks u will have to notch the frame. otherwise the axle will be slappin' da frame. Ah I see. Right now my axle is actually pushing on the rubber bump stops in the rear, could I just cut it in half or will I have to take them all the way out. I mean if I have to notch the frame with 5" blocks, it seems like they wont even be there I know it seems like I'm asking a lot of questions, I just wanna do this right the first time, this is the first 521 I've ever owned and I want it to be done right. So thanks for the help who ever has given me advice. Quote Link to comment
mrbigtanker Posted October 16, 2012 Report Share Posted October 16, 2012 I got 4" blocks on my truck.And that to me is to much already.Another thing is as you add blocks,it will bring your spring plate lower and depending on your wheels offset it will hit the spring plate.And if you need bump stops that bad,get a set of energy suspension low profile ones or save the money and do like most of us do and that is remove them. 1 Quote Link to comment
skyblue Posted October 16, 2012 Report Share Posted October 16, 2012 I removed the rear bump stops on mine and i have 3 in blocks. but i still have tons of clearance. Quote Link to comment
71datsuns Posted October 16, 2012 Author Report Share Posted October 16, 2012 Thanks for the input. Ill try removing the bumpstops this weekend too. I've gotta find a bearing carrier spacer too before i drop any further. Quote Link to comment
alabama_lowlife Posted October 16, 2012 Report Share Posted October 16, 2012 Love the pics. I have 4" blocks on mine and 18" wheels. It's very close to being undrivable due to the shock mount hanging below the scrub line. If you put 5" blocks or even 4" blocks on your truck with the wheels you have now your shock mounts will be below the scrub line. If you're not familiar with scrub line, it's basically the point at which your vehicle is so low that if you were to have a flat tire, a part of the vehicle would touch the ground before the wheel of the vehicle does. So if you were driving along at 55 and your rear tire were to go flat, the shock mount would catch the ground instead if your truck rolling safely to the shoulder of the road. Just something to be aware of with lowering blocks. Quote Link to comment
71datsuns Posted October 17, 2012 Author Report Share Posted October 17, 2012 Love the pics. I have 4" blocks on mine and 18" wheels. It's very close to being undrivable due to the shock mount hanging below the scrub line. If you put 5" blocks or even 4" blocks on your truck with the wheels you have now your shock mounts will be below the scrub line. If you're not familiar with scrub line, it's basically the point at which your vehicle is so low that if you were to have a flat tire, a part of the vehicle would touch the ground before the wheel of the vehicle does. So if you were driving along at 55 and your rear tire were to go flat, the shock mount would catch the ground instead if your truck rolling safely to the shoulder of the road. Just something to be aware of with lowering blocks. Oh, well thanks for the advice! I am definitely going to look into this more and really research it before I just jump into it. Would NOT want that to happen. Mind posting some photos of yours'? Thanks! Quote Link to comment
alabama_lowlife Posted October 17, 2012 Report Share Posted October 17, 2012 I won't clutter up your thread with your nice pics with my crappy pics taken with my phone, but here's a link to my build thread. Pics of mine are on the second page. http://community.ratsun.net/topic/44725-alabama-lowlifes-70-521/page__st__20 I may try to get some good outside pics this afternoon. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.