a1machinista1 Posted July 16, 2012 Report Share Posted July 16, 2012 I have a W58 round port cylinder head that I recently rebuilt.This is a very low mileage round port cylinder head. The factory iron guides were checked with a dial bore gauge and are perfect so they were not changed. This has a three angle valve grind, new intake and exhaust valves, new valve springs, (NOS) factory camshaft, reground rocker arms, new valve stem seals, the steel exhaust liners are in the best shape I have seen in 18 years of doing machine work. The manifold side has been surfaced, the deck has been surfaced. This is a fantastic head for someone running a stock l20b. The head comes assembled with the valve lash set. $200 PLUS shipping. You only pay what it cost to get to you. 1 Link to comment
Eagle_Adam Posted July 16, 2012 Report Share Posted July 16, 2012 where are you located? Link to comment
a1machinista1 Posted July 16, 2012 Author Report Share Posted July 16, 2012 Portland, Oregon Link to comment
Lonestar Posted July 16, 2012 Report Share Posted July 16, 2012 Will that work on an L16? I'm gunna need a new head for my goon. Link to comment
MicroMachinery Posted July 17, 2012 Report Share Posted July 17, 2012 Yes. It will work well, too. Link to comment
wayno Posted July 17, 2012 Report Share Posted July 17, 2012 This is a good deal. :thumbup: Link to comment
datzenmike Posted July 17, 2012 Report Share Posted July 17, 2012 The compression will drop slightly on an L16 and the exhaust ports won't match your square L16 manifold, but it will work. Link to comment
oldskoolvws Posted July 17, 2012 Report Share Posted July 17, 2012 Done. Shipping to 94550? Just right for my stock L20....running 40's. Link to comment
mrbigtanker Posted July 17, 2012 Report Share Posted July 17, 2012 Done. Shipping to 94550? Just right for my stock L20....running 40's. I wish i had your money,just look at your truck and then look at mine. Link to comment
a1machinista1 Posted July 17, 2012 Author Report Share Posted July 17, 2012 Done. Shipping to 94550? Just right for my stock L20....running 40's. I will check shipping as soon as I get to the shop Link to comment
oldskoolvws Posted July 17, 2012 Report Share Posted July 17, 2012 I wish i had your money,just look at your truck and then look at mine. Look at your motor, then look at mine :thumbup: This might be the start of the engine bay... Link to comment
a1machinista1 Posted July 17, 2012 Author Report Share Posted July 17, 2012 Sold,Sold,Sold Link to comment
mrbigtanker Posted July 17, 2012 Report Share Posted July 17, 2012 Look at your motor, then look at mine :thumbup: This might be the start of the engine bay... don't tell know one there's no pistons or crank or nothing inside that's why the outside is so shinny.lol Link to comment
Recommended Posts