CameronT Posted April 8, 2012 Report Share Posted April 8, 2012 I am wondering what model trucks rims I can use for my 620. Anyone know what bolt pattern will work? Quote Link to comment
moparvwfreak Posted April 8, 2012 Report Share Posted April 8, 2012 Well, toyota, chevrolet (4wd), nissan, isuzu, mazda. The bolt pattern is the same but the center bore might need some work.I have yota 4runner rims on my wifes 73 620. Quote Link to comment
albyneau Posted April 8, 2012 Report Share Posted April 8, 2012 Well, toyota, chevrolet (4wd), nissan, isuzu, mazda. The bolt pattern is the same but the center bore might need some work. ^ DITTO^~ nearly EVERY 6-bolt pattern on the planet is 6 x 5.5", save very early Willys HD stuff (like 6 x 8'' or the likes) and late model Dorfs were a 6 x ?mm... Quote Link to comment
DatDoug Posted April 8, 2012 Report Share Posted April 8, 2012 Your Datsun bolt pattern is 6x5.5" Some popular cross over rims are Nissan pathfinders, Nissan ST's, Chevy Blazer ralleys, Chrome Escalades, Nissan Titans, Nissan frontier, Isuzu Trooper, Chevy Suburban alloys, Toyota 4x4 rims, Dodge D50, Mazda trucks pre-93 Quote Link to comment
DaveyDaveDaveDave Posted April 8, 2012 Report Share Posted April 8, 2012 Some 6 lug Dodge rims are on a smaller circle (6x5"?) Thats the only common make in the states that wont at least work in theory. Quote Link to comment
CameronT Posted April 8, 2012 Author Report Share Posted April 8, 2012 Thank you all for the help I have a lot more chance to find nice rims now. Thanks! Quote Link to comment
Slixon Posted April 8, 2012 Report Share Posted April 8, 2012 Ford 6 lug do not work either just so you know. Quote Link to comment
CameronT Posted April 8, 2012 Author Report Share Posted April 8, 2012 Ohh okay thank you for the heads up Quote Link to comment
datzenmike Posted April 8, 2012 Report Share Posted April 8, 2012 Then mine must be Chev. Always wondered. Quote Link to comment
DatDoug Posted April 8, 2012 Report Share Posted April 8, 2012 The Old Ford Courieir ones will fit. Chevy Luv. Chevy 1/2 ton 4x4. Older Jeep trucks. Mitsubishi trucks. Quote Link to comment
ohmrchristopher Posted April 8, 2012 Report Share Posted April 8, 2012 I had, what would be concidered Chevy rims on my 4x4 Toyota. The only problem I ran into was the center bore was too small for the front locking hubs. I had the rims machined out to fit. No problemo!! Quote Link to comment
datzenmike Posted April 8, 2012 Report Share Posted April 8, 2012 Hmmm mine fit the stock 620 and the 'Yota SAS hubs. Quote Link to comment
peanutbuttercups Posted April 9, 2012 Report Share Posted April 9, 2012 GET TITAN RIMS Quote Link to comment
jputz Posted April 9, 2012 Report Share Posted April 9, 2012 Mazda trucks Isuzu trucks & SUV's Chevy 1/2 ton 4x4's Trucks & SUV's Ford Couriers Nissan trucks & SUV's Dodge Ram 50's Mitsubishi minis Caddy Escalade (17" & up) Just my .02 Quote Link to comment
CameronT Posted April 10, 2012 Author Report Share Posted April 10, 2012 GET TITAN RIMS What size titan rims? I'm wanting to do a drop about 1.5 inch from the tires Quote Link to comment
peanutbuttercups Posted April 18, 2012 Report Share Posted April 18, 2012 http://i1161.photobucket.com/albums/q518/peanutbuttercups1/IMG_20120122_174940.jpg mine are seventeen inch off an05 I think. I have been told they need the centers bored out a little I have not mounted mine yet. You can search threads on ratsun there's info on it. The titan rims you can get cheap got mine for 200 off craigslist Quote Link to comment
Drummerboy4as Posted April 18, 2012 Report Share Posted April 18, 2012 Same wheels except mounted and bored :D Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.