daddynono Posted April 7, 2012 Report Share Posted April 7, 2012 So these are some 2dr 510 floor boards I had made. Just wondering how many people would like to buy them if i reproduce them? dont have a price yet, i guess im just testing the water here. so let me know and if i get enough demand i might make more sets. Link to comment
daddynono Posted April 7, 2012 Author Report Share Posted April 7, 2012 oh and i forgot to mention the front boards are cut a little different in styles. left side has the transmission support taken out and the right is cut around. i can do both ways on both sides. Link to comment
DatsunMod Posted April 12, 2012 Report Share Posted April 12, 2012 if they are reasonable price i would buy some Link to comment
Uber Deaf One Posted April 12, 2012 Report Share Posted April 12, 2012 I have a friend who would probably be interested. Anything is better than buying floors from Australia lol. I'll direct him to this thread. Link to comment
The Taterhead Posted April 12, 2012 Report Share Posted April 12, 2012 Absolutely interested, especially if the price is right Link to comment
Vorsach Posted April 12, 2012 Report Share Posted April 12, 2012 Depending on price, I'm definitely interested... Link to comment
Mr. BOHICA Posted April 12, 2012 Report Share Posted April 12, 2012 I'd be down for a complete set if priced accordingly! Link to comment
justplainjoe Posted April 12, 2012 Report Share Posted April 12, 2012 count me in too........depending on price Link to comment
Datsun 5 1 0 Posted April 13, 2012 Report Share Posted April 13, 2012 Uber Deaf One just mentioned me about this and I am definitely in need for some. So, count me in...if the price is right! Link to comment
freekwonder Posted April 13, 2012 Report Share Posted April 13, 2012 Yeah definitely would be interested depending on the price. Especially if there was a chance to get the front ones a little longer. My driver side is just on the floor, but my passanger side has a few holes were it starts to become the firewall above the floor pan. Link to comment
rocko Posted April 13, 2012 Report Share Posted April 13, 2012 interested...need to know pricing. Link to comment
daddynono Posted April 14, 2012 Author Report Share Posted April 14, 2012 its looking like a set of 4 is going to be $300 or $80 a quarter. plus shipping. also should have some after photos on monday or tuesday for you guys. Link to comment
daddynono Posted April 14, 2012 Author Report Share Posted April 14, 2012 Yeah definitely would be interested depending on the price. Especially if there was a chance to get the front ones a little longer. My driver side is just on the floor, but my passanger side has a few holes were it starts to become the firewall above the floor pan. my front passenger is the same way. if you look in the picture, part of the wheel-well and fire wall are cut out. im currently figuring out the best way to fix it and look original as possible on mine. with out being in front of yours idk if i can help you on that one. the front board is cut to rest on the seam where the firewall comes down. Link to comment
DISLEXICDIME Posted April 14, 2012 Report Share Posted April 14, 2012 you can get them cheaper from mark grimsley http://datsun510.com/photopost/showphoto.php?photo=13359&title=mark-g-replacement-front-floor-pan&cat=3375 Link to comment
daddynono Posted April 14, 2012 Author Report Share Posted April 14, 2012 you can get them cheaper from mark grimsley http://datsun510.com...or-pan&cat=3375 then get them from him just thought i would try to help people out. Link to comment
qwik510 Posted April 14, 2012 Report Share Posted April 14, 2012 you can get them cheaper from mark grimsley http://datsun510.com...or-pan&cat=3375 One of the nice things about Mark's panels is that there is a decent flange at the front and both sides of the panel to make it easy to weld to the firewall, inner rockers and the trans tunnel. Also, it has several beads for strength. Maybe you could make yours more like his and price them like his and save people on shipping as Mark is here on the east coast. Link to comment
rocko Posted April 15, 2012 Report Share Posted April 15, 2012 One of the nice things about Mark's panels is that there is a decent flange at the front and both sides of the panel to make it easy to weld to the firewall, inner rockers and the trans tunnel. Also, it has several beads for strength. Maybe you could make yours more like his and price them like his and save people on shipping as Mark is here on the east coast. how do i go about ordering the floor panels from Mark. I clicked the link but it took me to a picture. Thanks. Link to comment
Datsun 5 1 0 Posted April 15, 2012 Report Share Posted April 15, 2012 I tried emailing Mark twice, but he hasn't responded yet. Link to comment
Z chopper Posted April 16, 2012 Report Share Posted April 16, 2012 there are a couple members fabricating floorpans, one that I know has pans that look closer to oem than others. but these look very good for non oem style pans Link to comment
Recommended Posts