metalmonkey47 Posted December 20, 2011 Report Share Posted December 20, 2011 Hey dudes, got a tricky one for you. I need to replace my IGN switch in my 620. I've been dealing with these SHIT Duralast switches since I bought one new, and I've replaced it 7 times in the last few months since I got the truck because the plastic contact plate on the back falls apart and eventually is trashed. Before you shit on "Duralast" parts, they're not manufactured by 'Duralast', this one in particular is manufactured but Wells, who is the leading manufacturer in electronic replacement parts and seems to be the default carried by any/all autoparts stores. I know I'm not the only one that's had this issue, so I need to know if anyone has worked out this problem before or found a QUALITY manufactured part. I checked with the Nissan dealer, but their parts computer for the old school is gone to shit and they can't get me a P/N, so I'm kind of fucked out of OEM unless someone might be able to dig up a Nissan P/N. Quote Link to comment
philcas1987 Posted December 20, 2011 Report Share Posted December 20, 2011 call chad at chico nissan! they ship. and no wells is not default for all parts houses. dont let them brainwash you. of course you dont know any better. i walked in to my local nissan after mike then jim left. those guys are great!. they took down all nismo advertisments and got rid of all the cool shit they had on display. gave the counter guy shit for it. he said they are focusing on leafs and shit. apparent by the countless floormats ventshades and wipers for new nissans. drs nissan is the only place to go here in portland now. mike is there Quote Link to comment
I'm BLUE Posted December 20, 2011 Report Share Posted December 20, 2011 totally believe you on the "shit" products !!! ,,,, Not to threadjack ,,, Have you thought of wiring in a push-button start ? :) ( I am going to do this ,,, on my project ) Quote Link to comment
Laecaon Posted December 20, 2011 Report Share Posted December 20, 2011 Have you thought of wiring in a push-button start ? :) ( I am going to do this ,,, on my project ) Me too. 2 switches and a push button. 1 switch is accessory power, 1 is ignition power, and then start of coarse. 1 Quote Link to comment
Str8_69 Posted December 20, 2011 Report Share Posted December 20, 2011 The parts list on Olddatsuns.com lists the P/N as 80010-B9800, but no pic so dunno if it's the whole switch or just the cylinder and key, but maybe Nissan's description will say? Quote Link to comment
ggzilla Posted December 20, 2011 Report Share Posted December 20, 2011 Nissan ones are good. can get one at the wrecking yard. They last decades (usually). 620 for 1979 ones are like other Datsuns from 1970-up (attached to back of key lock by two small screws) Earlier 620 has it separate from the ignition lock key part. Quote Link to comment
Laecaon Posted December 20, 2011 Report Share Posted December 20, 2011 I have a unknown condition (dont have a multimeter currently to check) switch in my basement. plastic looks nice... Quote Link to comment
Hardwyre Posted December 20, 2011 Report Share Posted December 20, 2011 Biometric fingerprint "lock" on the steering column connected to a time delayed relay with a push button that toggles between starter/ignition and shutting the car off. :) I have no idea what I just said. I'm tired. But it sounds like a good idea. Quote Link to comment
mike Posted December 20, 2011 Report Share Posted December 20, 2011 A local key&lock shop wants $12 to rekey a datsun ignition from the wrecking yard, grab the door locks while youre at it, its nice to have matching locks/ign. I paid thirty something for a new/aftermarket one and wasnt too impressed... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.