SR20-620 Posted August 17, 2011 Author Report Share Posted August 17, 2011 great guys so were looking @ a potential 12 so far!!! can anybody suggest other places we might get interest? Quote Link to comment
hang_510 Posted August 17, 2011 Report Share Posted August 17, 2011 I'd be interested. It would be cheaper then moding my ford 9" to fitting same story for a wagon Quote Link to comment
Gary Posted August 17, 2011 Report Share Posted August 17, 2011 could try ozdat, datnet, 510realm, any bluebird forums too i guess id try and keep it away from a group buy as such, most forums have problems with those since its usually one person that isnt too well known handling a lot of cash at once, easy for them to disappear if you were able to convince the manufacturer to make them, and organise it so buyers go directly through them and not through anyone else, itd be better accepted across forums and you'd be more likely to pull it off international orders would be simpler too that way, since more people would trust the manufacturer not to stooge em, meaning more people in on getting some Quote Link to comment
]2eDeYe Posted August 17, 2011 Report Share Posted August 17, 2011 I contacted them a few months back and they had no interest. Looks like more than just me called them. The story I got was Precision Gear was sold to Omix-Ada. The company bought Precision Gear primarily for their gear technology and no longer have any interest in making LSD's for Datsun/Nissan H190. Maybe things have chnaged, but you're going to need more that a dozen orders to refire the product, IMO. Same story I got when I emailed them last year. I'm interested, but they would have to make them first, no more prepays for me :P Quote Link to comment
yello620 Posted August 17, 2011 Report Share Posted August 17, 2011 I got the same story a few months ago also. So i lost interest in the H190 and have a new plan. Forget those guys that are going to consider making one more run of h190 parts, and when you start to wear out the internals of it, they are not making them anymore. Quote Link to comment
H5WAGON Posted August 18, 2011 Report Share Posted August 18, 2011 +2 more....:cool: Sucks not having options. Quote Link to comment
SR20-620 Posted August 22, 2011 Author Report Share Posted August 22, 2011 bump i need something a little more to turn into these guys. Quote Link to comment
crazytimme Posted August 31, 2011 Report Share Posted August 31, 2011 If they are interested in making one for the wagon I can supply the third member (or the whole axle) for them to measure up. Quote Link to comment
copydat Posted September 7, 2011 Report Share Posted September 7, 2011 Inner. Another international order. Take on Gary's comments as I too have seen this type of thing fall flat on other forums. Quote Link to comment
the hardbody guy Posted November 7, 2011 Report Share Posted November 7, 2011 definitely interested! also guys on infamusnissan.com and nicoclub.com and nissanforums.com and ka-t.com would be interested! Quote Link to comment
the hardbody guy Posted November 7, 2011 Report Share Posted November 7, 2011 infamousnissan.com ahem Quote Link to comment
the hardbody guy Posted November 7, 2011 Report Share Posted November 7, 2011 good idea it would be easier to deal direct with the mfr rather than group buy. we'll see. Quote Link to comment
riverz Posted November 25, 2011 Report Share Posted November 25, 2011 Put me down for one. Quote Link to comment
datzenmike Posted November 25, 2011 Report Share Posted November 25, 2011 good idea it would be easier to deal direct with the mfr rather than group buy. we'll see. Put me down for one. Take a look at the original poster's profile....... banned, douchebag. Quote Link to comment
devi Posted December 15, 2012 Report Share Posted December 15, 2012 Hello.Has anyone used this?https://www.4x4parts.com/nissan/frontier-limited-slip-differential-p-304.htmlhttp://www.precisiongear.com/powerbrute.htm Quote Link to comment
_chiefjt Posted December 28, 2012 Report Share Posted December 28, 2012 hhmmm......I'd buy one. Hello.Has anyone used this?https://www.4x4parts.com/nissan/frontier-limited-slip-differential-p-304.htmlhttp://www.precisiongear.com/powerbrute.htm I guess no one looked at this yet but 725.00 is a lot to me. But I can't find how much the precision gear power brute one is. Do you know how much each of these would cost? LOM103-2 4CYL PICK-UP REAR 3.70 - 3.89 29 LOM103-7 4CYL PICK-UP REAR W/SPACER 4.11 - 5.43 29 Quote Link to comment
the hardbody guy Posted December 29, 2012 Report Share Posted December 29, 2012 http://www.infamousnissan.com/forum/showthread.php?t=24236 I did this instead. I dunno ifthere isa lsd availableor not. Im really happy with my isuzu dana 44 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.