Sinnful Posted April 18, 2011 Report Share Posted April 18, 2011 OK so I have a 71 510. I need a steering wheel adapter for a Nardi, is there other cars that will work? instead of looking only for a 510. thanks if you happen to have one let me know also, as I am looking for one Quote Link to comment
Sinnful Posted April 19, 2011 Author Report Share Posted April 19, 2011 sweet thanks, i thought i heard about that before wanted to double check Quote Link to comment
r0p0doe Posted April 19, 2011 Report Share Posted April 19, 2011 Momo has a 510 adapter that works with nardis Quote Link to comment
Radim Posted April 19, 2011 Report Share Posted April 19, 2011 Stock 720 ST Hub uses Nardi bolt pattern, don't know if it fits 510s but it fiits 620s and Z cars for sure. Quote Link to comment
benzo Posted April 19, 2011 Report Share Posted April 19, 2011 I believe a momo hub off a 240-280Z would work Quote Link to comment
yello620 Posted April 19, 2011 Report Share Posted April 19, 2011 Stock 720 ST Hub uses Nardi bolt pattern, don't know if it fits 510s but it fiits 620s and Z cars for sure. Radim, are you sure about this. Dont want to doubt you at all. I just have the 720 ST adapter and wheel and the wheel needs attention, and a Nardi might be a good option for me. Would hate to spend money on a Nardi and not have it fit. Any pics of one fitting correctly? Really want this to be true. Quote Link to comment
Jester Posted April 19, 2011 Report Share Posted April 19, 2011 LOTS of guys on here will swear that all the Datsuns used the same size steering shaft and spline count. I have a 720 wheel in my wagon. Quote Link to comment
Pacific coast Datsun Posted April 19, 2011 Report Share Posted April 19, 2011 Radim, are you sure about this. Dont want to doubt you at all. I just have the 720 ST adapter and wheel and the wheel needs attention, and a Nardi might be a good option for me. Would hate to spend money on a Nardi and not have it fit. Any pics of one fitting correctly? Really want this to be true. I too can confirm this. I took a 720 ST hub i scored from the yard & bolted it to my 6 hole Nardi wheel. & for the record Ive had the ST hub on my old 521 & wagon & as you can see it on my 620. The splines ARE the same :D Quote Link to comment
yello620 Posted April 19, 2011 Report Share Posted April 19, 2011 Thanks for helping confirm this PCD Quote Link to comment
Pacific coast Datsun Posted April 19, 2011 Report Share Posted April 19, 2011 ^^^ no worries. Every time im at a yard i look for the ST hubs & buy them even if i dont need it. Somebody out there will :cool: Quote Link to comment
Radim Posted April 19, 2011 Report Share Posted April 19, 2011 Yup, i got one on my truck, and got another one for my brother's Z and they are both being used with authentic Nardi wheels. Quote Link to comment
Bleach Posted April 19, 2011 Report Share Posted April 19, 2011 Just as long as you understand that the "ST" model is rare and is not the normal steering wheel in a 720. Also, how is it that a 240SX steering wheel adapter will fit? After about 1984 all Nissan steering wheels shafts changed size. You can't use Pulsar, 240SX, 300ZX, ect on the 280ZX, 620, 720, and older cars. I did find a kit on eBay a while back in Taiwan and it was about $50 with shipping. Said it would fit the 280ZX and it did. Just be careful of kits that also say they fit 240SX. They are probably not for a Datsun. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.