Topher88 Posted July 22, 2013 Author Report Share Posted July 22, 2013 Nope gonna make them work under stock Quote Link to comment
510 OC Posted July 22, 2013 Report Share Posted July 22, 2013 Dude, your going to have some trouble fitting 15x8.5's with stock or rolled fenders. Unless you have some nasty camber to compensate. :lol: What's the offset on them? Quote Link to comment
Topher88 Posted July 22, 2013 Author Report Share Posted July 22, 2013 I think they are close to 0. I'm going to need to pull the shit out if the fender and have as much camber as my adjustable cross member will give me. These are my look bad ass wheels not my go fast wheels lol Quote Link to comment
510 OC Posted July 22, 2013 Report Share Posted July 22, 2013 I think they are close to 0. I'm going to need to pull the shit out if the fender and have as much camber as my adjustable cross member will give me. These are my look bad ass wheels not my go fast wheels lol No doubt, they will look badass! haha Quote Link to comment
SR20DETdatsun510 Posted July 23, 2013 Report Share Posted July 23, 2013 I concur! Quote Link to comment
gumbyz13 Posted July 23, 2013 Report Share Posted July 23, 2013 I like the "LOOK BAD ASS" plan... 1 Quote Link to comment
aintnobiscuit Posted July 23, 2013 Report Share Posted July 23, 2013 I think they are close to 0. I'm going to need to pull the shit out if the fender and have as much camber as my adjustable cross member will give me. These are my look bad ass wheels not my go fast wheels lol ^^^ THIS! Quote Link to comment
Topher88 Posted July 23, 2013 Author Report Share Posted July 23, 2013 Easy off ftmfw Quote Link to comment
Eagle_Adam Posted July 23, 2013 Report Share Posted July 23, 2013 damn!!!! note to self.... Easy off is fuck easy off yo!!!! Lookn good man Quote Link to comment
Topher88 Posted July 23, 2013 Author Report Share Posted July 23, 2013 Just dropped them off at polishing Quote Link to comment
Eagle_Adam Posted July 23, 2013 Report Share Posted July 23, 2013 all you used was easy off? Quote Link to comment
Tristin Posted July 23, 2013 Report Share Posted July 23, 2013 You keep saying anodizing. Are these ano'd? I was under the impression that they were powercoated. Quote Link to comment
Topher88 Posted July 23, 2013 Author Report Share Posted July 23, 2013 They are clear anodized. I'm 100% sure Quote Link to comment
Tristin Posted July 23, 2013 Report Share Posted July 23, 2013 Oh were talking clear coat on the lips. Gotcha. I was thinking the black. Quote Link to comment
SR20DETdatsun510 Posted July 23, 2013 Report Share Posted July 23, 2013 Topher, photo doc the roll and pull so I can see how to do mine. I want to tuck my 8jj -7. I do not like the poke! Quote Link to comment
Topher88 Posted July 23, 2013 Author Report Share Posted July 23, 2013 The black might be powder coat... I forget if it came off with the aircraft paint remover.... I think it did.... Quote Link to comment
Topher88 Posted July 28, 2013 Author Report Share Posted July 28, 2013 Before camber After Gonna look tits when I work out the fenders 2 Quote Link to comment
510 OC Posted July 28, 2013 Report Share Posted July 28, 2013 Dayum son! Definitely going to look tits when you work out the fenders. :thumbup: 1 Quote Link to comment
El Compa_510 Posted July 28, 2013 Report Share Posted July 28, 2013 Nice brother!!!!!! Quote Link to comment
SR20DETdatsun510 Posted July 30, 2013 Report Share Posted July 30, 2013 See, I cant even get my 15x8's under like that. Next time you have your wheels off, can you measure unloaded from mounting surface to mounting surface please. I think something is wider on my rear end. And how were you able to get that much camber? My rear end is slotted and I have it all the down and it looks like my wheels are still almost 0°.... Weird..... Quote Link to comment
Topher88 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Ya I will try and remember to measure it. I slotted my rear end to the dime quarterly specs. If you think about it the slotted rear end is to correct the camber so my rear end in the pic is actually at the bone stock location Quote Link to comment
SR20DETdatsun510 Posted July 31, 2013 Report Share Posted July 31, 2013 Ya I will try and remember to measure it. I slotted my rear end to the dime quarterly specs. If you think about it the slotted rear end is to correct the camber so my rear end in the pic is actually at the bone stock locationThanks bro. I have mine as far down in the slot as it will go. Did you just alot the existing braket or weld a new one on? Quote Link to comment
Topher88 Posted July 31, 2013 Author Report Share Posted July 31, 2013 They are just re stock mounts. Didnt weld on new ones Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.