Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 it should work still right Quote Link to comment
datzenmike Posted January 4, 2011 Report Share Posted January 4, 2011 Oh fuck ya. Mine hit the grease nipple when the engine torqued under load. A smaller belt holds it closer to the block but I couldn't bet the belt on the pulley. Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 right on think the torque of the z24 would hit it harder Quote Link to comment
datzenmike Posted January 4, 2011 Report Share Posted January 4, 2011 Oh yeah you have the Z24 '77 620??? Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 napz and z24 same right Quote Link to comment
chester Posted January 4, 2011 Report Share Posted January 4, 2011 (edited) yeah it is in i have had it in for awhile i will gets oics tomorrow for you i have to fix it because i broke the front lower bolt. i had to use my other alt upper bracket though since the stock one didnt allow me to have any adjustment, I am using a 35.5 length belt. but it works goods. to get that belt on i had to put it on the alt and water pump the get it on the crank pulley as much as I could then rotate the motor so it would get the rest of the way on Edited January 4, 2011 by chester Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 Oh yeah you have the Z24 '77 620??? no its a 76 :D Quote Link to comment
Jayden71 Posted January 4, 2011 Author Report Share Posted January 4, 2011 Sup Beeeatches????? Why the hell can't Farmer come to the meet?? :angry: Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 he mite but i think he has to work Quote Link to comment
Jayden71 Posted January 4, 2011 Author Report Share Posted January 4, 2011 Well, the Tripod will be there right?????????? :blink: :blink: :blink: :blink: Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 we should all be there Quote Link to comment
Jayden71 Posted January 4, 2011 Author Report Share Posted January 4, 2011 Hopin the weather holds out. :D 521 ROAD TRIP :D Quote Link to comment
datzenmike Posted January 4, 2011 Report Share Posted January 4, 2011 napz and z24 same right Not strictly speaking but a Z24 is a NAPS yes. NAPS is a system used on a couple of Nissan motors including the Z20/Z22 and the Z24. Hopin the weather holds out. :D 521 ROAD TRIP :D The weather here on the island has been GREAT!!! Super -2 or -3 C but sunny since last Wednesday but starting tomorrow it's supposed to snow/rain. Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 the weather is great at -2 or -3 that's crazy :D Quote Link to comment
Jayden71 Posted January 4, 2011 Author Report Share Posted January 4, 2011 Ya, its been nice here, well sunny anyway. About 15 during the day and -15F at night. BRRRRRRR. She fires right up though after 3 days of sittin in it, in the garage of course. The freeway down to Boise does have a few icy spots still and lots of gravel on it. I really don't want to chip the paint or worse yet the $800 windsheild :o I will get a good look at it in the morning. Got a load to deliver in the valley in the am. So, we'll see what happens on Saturday Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 when its this cold i keep my happy ass inside on ratsun :D Quote Link to comment
chester Posted January 4, 2011 Report Share Posted January 4, 2011 hello yes i will be there and i might be getting a tat. i gots a question since i fixed my truck today when i step on it the charge light comes on and i am low on the volt gauge could it be the alt is bad already Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 it shouldn't be but i got 3 alts from auto zone and all 3 where bad :D Quote Link to comment
Jayden71 Posted January 4, 2011 Author Report Share Posted January 4, 2011 You go through alts like Gage goes through Datsuns :lol: Could be yoour regulator now Quote Link to comment
chester Posted January 4, 2011 Report Share Posted January 4, 2011 yeah could be i am going to bring it in and have them test it and go from there do have one in stock now :D and would it matter what volt regulator i use since i have the 510 50 amp alt? Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 it shouldn't Quote Link to comment
chester Posted January 4, 2011 Report Share Posted January 4, 2011 i dont know but i dont like it so i have to get it fixed before sat so i can make it to the meet Quote Link to comment
Jayden71 Posted January 4, 2011 Author Report Share Posted January 4, 2011 If yer truck aint runnin don't worry, you can ride in class in the 521 :D :hyper: Quote Link to comment
chester Posted January 4, 2011 Report Share Posted January 4, 2011 oh it will be it is running now but the charge light comes on when i get on it hard so i dont know what is wrong anyone please have ideas Quote Link to comment
Wide14u Posted January 4, 2011 Report Share Posted January 4, 2011 is the belt slipping Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.