izzo Posted January 5, 2011 Report Share Posted January 5, 2011 Eh, using rustoleum is not really a bed liner, it will scratch/chip off. For what you paid on that rattle can stuff, napa autoparts has a do it yourself bed liner kit for 60 dollars & is much more durable. Looks good tho! Quote Link to comment
Zeusimo Posted January 5, 2011 Author Report Share Posted January 5, 2011 Been On For About 2 Months Carry Motorcycles Back And Fourth, And Lots Of Angle Iron To Work No Chips So Far And It Has A 100-200ish Grit? Feel To It :D Quote Link to comment
Zeusimo Posted January 7, 2011 Author Report Share Posted January 7, 2011 So My Truck Had Some Started Having Some Electrical Problems Constant Misfiring, Stalling When Under Load, Dying Headlights Turns Out It Was The Old 30 Amper So I Bought A 60 Amper Meant For A 81' 510 It Was A Simple Swap But The Fan Would Hit The Radiator Hose So I: Extended The Arm An Additional 1" Got A Belt That Was 1/2" Bigger And A Flexible Hose That Would Go Under And Around The Alt Prepped For Cuttin' And Weldin' Put Into Place Tac Tak Welded All The Way Around Cleaned And Grinded Flush My Final Clearance To The Idler Nut Was A Finger :lol: Quote Link to comment
Zeusimo Posted January 7, 2011 Author Report Share Posted January 7, 2011 So I Got This Elephant Oil Cap Off A 720 A Few Days Ago And Never Seen One Like This Before Anyone Knows What This It's About? Quote Link to comment
Zeusimo Posted January 9, 2011 Author Report Share Posted January 9, 2011 I Found This Valve Cover :D Cleaned It Up, Hi-Temp Primer Den Some Blue Remove Some Paint End Result: Quote Link to comment
dat77sun Posted January 9, 2011 Report Share Posted January 9, 2011 nice 620, what mods to the motor are you gonna do? weber? Quote Link to comment
Zeusimo Posted January 9, 2011 Author Report Share Posted January 9, 2011 Well The Engine Is Already In Tip Top Shape But My Hitachi Is On It's Last Legs So Right Now I'm Saving Up For Some Weber DCOE 40's And Manifold ^^ If That Doesn't Happen Then A 32/36 DGEV :( Remove All Of The Smog And Eventually Get Another Hitachi To Smog It Quote Link to comment
dat77sun Posted January 19, 2011 Report Share Posted January 19, 2011 any updates? Quote Link to comment
Zeusimo Posted January 19, 2011 Author Report Share Posted January 19, 2011 Updates? No Setadpu? Yes :lol: My Hitachi Went To Carburetor Heaven January 12, 2011 Approximately 3:25ish PM :( It Might Sit In My Back Yard For A While Since I'm Going Back To Japan In April And The Plane Ticket Alone Is $1300 So I Guess I'm Riding My Bike To School For The Next 3 Months <_< Quote Link to comment
dat77sun Posted January 19, 2011 Report Share Posted January 19, 2011 is your carb just making it run rough and not letting it rev past around 2k? thats what my old stock carb did, then i got a weber :lol: Quote Link to comment
Zeusimo Posted January 19, 2011 Author Report Share Posted January 19, 2011 My Primary Jet Went Out About 3 Months Ago And Welded A Few Pieces Together So I Could Run The Truck Off The Secondary Barrel... But Didn't Last Too Long, Now It Won't Start Unless Someone Pumps Gas From Under The Hood And When It Does Turn On It Idles At 200-300ish, Revs Up To 1k And Dies Under Load :angry: Quote Link to comment
dat77sun Posted January 19, 2011 Report Share Posted January 19, 2011 My Primary Jet Went Out About 3 Months Ago And Welded A Few Pieces Together So I Could Run The Truck Off The Secondary Barrel... But Didn't Last Too Long, Now It Won't Start Unless Someone Pumps Gas From Under The Hood And When It Does Turn On It Idles At 200-300ish, Revs Up To 1k And Dies Under Load :angry: oh damn, thats alot worse than my carb was, my stock carb only needs the float adjusted, so im just sellin it, you can get it for a good price if you want ;) Quote Link to comment
Zeusimo Posted January 19, 2011 Author Report Share Posted January 19, 2011 I Don't Have Any Spending Money, Except For The 37 Cents In My Pocket :P Quote Link to comment
dat77sun Posted January 19, 2011 Report Share Posted January 19, 2011 I Don't Have Any Spending Money, Except For The 37 Cents In My Pocket :P DEAL!!! Quote Link to comment
78kingcab Posted January 19, 2011 Report Share Posted January 19, 2011 nice lil 620, very clean....wow i never seen that oil cap either...the one with the big elephant on it.... Quote Link to comment
Zeusimo Posted January 21, 2011 Author Report Share Posted January 21, 2011 Well, Not Really An Update But I Found This Little Millermatic 150 On Craigslist For $100 The Owner Bought It For 500 Bucks, Used It Once And Had Been Sitting In His Garage For About A Year He Said It Didn't Work But I Went To Go Look At It It Was In Really Good Condition, Popped The Hood And Paid The Man I Left Really Quick, Got Home, And All It Had Was A Bird's Nest :rofl: Adjusted Everything And Ran A Quick Bead Personally I Don't Like Or Trust MIG, But This Is Going To Make A Killer Tacker For Only $100 :frantics: Quote Link to comment
Zeusimo Posted February 3, 2011 Author Report Share Posted February 3, 2011 I Forgot To Take Pictures Of The Process But When I Re-Did My Exhaust On My El Camino I Recycled It's Old Exhaust On My 620 :P 2.25" Pipe, Magnaflow High-Flow Cat, Dynomax Muffler (Turbo Maybe???) And The Last 2 Feet Of Pipe Is 3" I Will Get Some Video Once I Can Get The Truck Started <_< Quote Link to comment
Zeusimo Posted February 3, 2011 Author Report Share Posted February 3, 2011 Ok, So Here's The Video It's Louder In Person :lol: Got It Running But It's Not Drivable Truck Doesn't Rev Over 1.75K Unless I Give It Gas From Under The Hood And It Runs Really Rich I Need A New Belt And Weber <_< http://www.youtube.com/watch?v=U0tmIUPpcdM Quote Link to comment
paisa13 Posted February 3, 2011 Report Share Posted February 3, 2011 La pifufa?? Orale!! Looks good man! pretty good looking paint for as old as it is!! Get the webber, you wont regret it! Quote Link to comment
skunk Posted February 3, 2011 Report Share Posted February 3, 2011 love this little truck, looks alot like my 620. i may have a weber for sale, ill let you know Quote Link to comment
Zeusimo Posted March 6, 2011 Author Report Share Posted March 6, 2011 Haven't Updated In A While But I Bought A Weber That Had A Bad Gasket And My Rebuild Kit Came In Today, So I Rebuilt It :) And Removed Smog Crap Truck Is Still Not Running, Tomorrow I Will Make An Adapter Gasket And Plug All Vacuum Lines If I Do Everything Right, Gonna Take Her For A Spin :D Quote Link to comment
Zeusimo Posted March 8, 2011 Author Report Share Posted March 8, 2011 I Put The Weber On My Truck And Had Vacuum Issues, I Got New Adapter Plate Bolts Because I Was Missing A Few. Got Rid Of One Leak But I Have Another Leak Somewhere... Gonna Look Tomorrow If I Have Time :blink: Quote Link to comment
paisa13 Posted March 8, 2011 Report Share Posted March 8, 2011 spray some carb cleaner around the carb to find the leak! when the motor evens out, you found the leak!! Quote Link to comment
Zeusimo Posted March 16, 2011 Author Report Share Posted March 16, 2011 Scored At The Junkyard $32.00 :cool: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.