danfiveten Posted November 17, 2010 Report Share Posted November 17, 2010 Ok so got the tach in, and was all ready to wire when i saw that the clip is already there, figure corey left it from when he pulled his tach. But heres my problem, plug it in, turned the truck over, and it sticks at 3k. Doesnt go up or down, when its just on and not running, sits at 3k. Lights work, goes back down when off. I saw the tach work earlier so i know its not the tach. Danny started acting up like crazy when i was trying to figure it out, so i know hes not going to let me so hoping someone has a answer for me :) Quote Link to comment
78kingcab Posted November 17, 2010 Report Share Posted November 17, 2010 Ok so got the tach in, and was all ready to wire when i saw that the clip is already there, figure corey left it from when he pulled his tach. But heres my problem, plug it in, turned the truck over, and it sticks at 3k. Doesnt go up or down, when its just on and not running, sits at 3k. Lights work, goes back down when off. I saw the tach work earlier so i know its not the tach. Danny started acting up like crazy when i was trying to figure it out, so i know hes not going to let me so hoping someone has a answer for me :) the wireing that is there is factory wireing.....should just clip in and work....i even had like 3 differnt tachs in there, and all worked id say it you tach..... Quote Link to comment
danfiveten Posted November 17, 2010 Author Report Share Posted November 17, 2010 Itd be jsut my luck that between the time i bought it when i saw it work, to putting it in the truck that it would go out on me :-/. Hoping something it just loose. Quote Link to comment
datsunaholic Posted November 17, 2010 Report Share Posted November 17, 2010 Unless the wiring at the coil is altered, I'd say that sounds like the tach is bad. Quote Link to comment
danfiveten Posted November 17, 2010 Author Report Share Posted November 17, 2010 I saw it working though......I swear to god the 620 hates me, its acting out since i cant drive it right now. Hoping someones seen this before, if it was bad i wouldnt think itd be moving at all. Ill try to get a video of it later, it sits at zero untill u turn the key to on then it goes up to 3k, and sits there when u start the truck, so some wire has to have come loose. If this was a 510 i would have it figured out in about 5 mins, but im not familiar with 620 wiring at all. Worst of all every time i try to take Lil D back into the garage he starts crying :( Quote Link to comment
fastdadd Posted November 17, 2010 Report Share Posted November 17, 2010 those plugs were also used for the clock that could go in there...check the wiring on the tach and the plug to make sure they match Quote Link to comment
lynchfourtwenty Posted November 17, 2010 Report Share Posted November 17, 2010 you still have this thing?? holy shiat! good job! as for the wiring, try to hook it up manually bypassing all the stock Crap. Quote Link to comment
moparvwfreak Posted November 17, 2010 Report Share Posted November 17, 2010 had this same issue when i installed the tach in my 79 rabbit. figured out that my tach signal was a constant power to power the clock. wouldn't work right even though it plugged in properly. might be worth a check on that. Quote Link to comment
danfiveten Posted November 17, 2010 Author Report Share Posted November 17, 2010 I would be worried about it being for the clock, but corey has had several tachs in there, and told me the plug should be right. Hey josh i may have to come over to your house :) And yes i still have it, wife wanted me to get rid of it, and now im not driving it with my back, so ive been back and forth on it. I love the truck, so im going to see after my back fusion how i can handle riding in the truck, and if my back still hurts with her she may have to go :( I may try some more comfy seats as well though. Just no working on cars for 4 months, so i want to figure this out before my surgery at the end of the month. Quote Link to comment
lynchfourtwenty Posted November 17, 2010 Report Share Posted November 17, 2010 hit me up.. Quote Link to comment
danfiveten Posted November 17, 2010 Author Report Share Posted November 17, 2010 pm me your number again. I got a new phone. Quote Link to comment
sick620 Posted December 21, 2010 Report Share Posted December 21, 2010 dude what ended up happenin with tach!? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.