Gensaiken Posted April 20, 2010 Report Share Posted April 20, 2010 I couldn't really find anything on the net but is it possible to repair a torn shift boot? Super glue? Something else? Just curious if its possible or if any one has attempted it. :cool: Quote Link to comment
Skib Posted April 20, 2010 Report Share Posted April 20, 2010 im sure some super glue would work fine, not sure how long it would last tho. you could stitch it with some fishing line or something too. Quote Link to comment
hang_510 Posted April 20, 2010 Report Share Posted April 20, 2010 ive had limited success with black RTV if you can clean it you could stitch it with some fishing line or something too. rivets? :hmm: Quote Link to comment
MikeRL411 Posted April 20, 2010 Report Share Posted April 20, 2010 ive had limited success with black RTV if you can clean it rivets? :hmm: I'm assuming that your tear is in one of the corrugations. Clean the edges and wipe them with white distilled vinegar, then dry [it's a primer]. Cut a piece of rayon or nylon cloth a bit longer and wider that the tear [cotton won't last when the RTV outgasses acetic acid aka vinegar]. Saturate the cloth with RTV and apply to the inside of the boot covering the tear and rub well, a tongue depressor or Popsickle stick comes to mind. Apply a small bit of the RTV to the outside area of the tear. Wet your fingers and "polish" the outer applied RTV to smooth it into the tear and blend with the outside contour [that's why you wiped it with vinegar]. This proceedure [without applying the reinforcing cloth patch] is how insulating boots are applied to the movable nozzles of solid rocket motors so should withstand normal or abnormal shifting in a 510. 4 Quote Link to comment
hang_510 Posted April 20, 2010 Report Share Posted April 20, 2010 Cut a piece of rayon or nylon cloth a bit longer and wider that the tear [cotton won't last when the RTV outgasses acetic acid aka vinegar]. Saturate the cloth with RTV and apply to the inside :w00t: thanks for the additional tip! ( + rep quota reached? :huh: WTF???) IOU1 Quote Link to comment
Gensaiken Posted April 21, 2010 Author Report Share Posted April 21, 2010 I'm assuming that your tear is in one of the corrugations. Clean the edges and wipe them with white distilled vinegar, then dry [it's a primer]. Cut a piece of rayon or nylon cloth a bit longer and wider that the tear [cotton won't last when the RTV outgasses acetic acid aka vinegar]. Saturate the cloth with RTV and apply to the inside of the boot covering the tear and rub well, a tongue depressor or Popsickle stick comes to mind. Apply a small bit of the RTV to the outside area of the tear. Wet your fingers and "polish" the outer applied RTV to smooth it into the tear and blend with the outside contour [that's why you wiped it with vinegar]. This proceedure [without applying the reinforcing cloth patch] is how insulating boots are applied to the movable nozzles of solid rocket motors so should withstand normal or abnormal shifting in a 510. Just wondering if I should use any particular RTV? Permatex RTV Silicone Adhesive? Wipe the white distilled vinegar off or let it air dry? Would it be too difficult to do it with out the inner bracing? Quote Link to comment
MikeRL411 Posted April 21, 2010 Report Share Posted April 21, 2010 Just wondering if I should use any particular RTV? Permatex RTV Silicone Adhesive? Wipe the white distilled vinegar off or let it air dry? Would it be too difficult to do it with out the inner bracing? I use GE or Permatex Black RTV, whichever the store has. You don't need the cloth, it's for long term insurance. If you are careful and ensure that the RTV contacts both sides of the tear you should be OK, just wait a day before flexing the boot or it will reopen. It would help to wipe the interior of the corrugation to insure that you have back surface support. I repaired a door switch on my Infiniti this way [way too small to insert any backing] and it is still flexible and "unbroken" after 2 years of opening and shutting the door. Let it air dry, the RTV will outgas acetic acid anyway, so there's no use wiping it off or rinsing it. Quote Link to comment
Gensaiken Posted April 22, 2010 Author Report Share Posted April 22, 2010 I use GE or Permatex Black RTV, whichever the store has. You don't need the cloth, it's for long term insurance. If you are careful and ensure that the RTV contacts both sides of the tear you should be OK, just wait a day before flexing the boot or it will reopen. It would help to wipe the interior of the corrugation to insure that you have back surface support. I repaired a door switch on my Infiniti this way [way too small to insert any backing] and it is still flexible and "unbroken" after 2 years of opening and shutting the door. Let it air dry, the RTV will outgas acetic acid anyway, so there's no use wiping it off or rinsing it. Cool, thanks. I'll give it a try and see how it works. Quote Link to comment
a.d._510_n_ok Posted May 10, 2010 Report Share Posted May 10, 2010 not exactly a repair but so cool..... http://yotatech.com/f116/crown-royal-shift-boot-198764/ Quote Link to comment
dat521gatherer Posted May 10, 2010 Report Share Posted May 10, 2010 i used rubber cement with a paper towel backing. lasted for a couple years. Quote Link to comment
Gensaiken Posted May 15, 2010 Author Report Share Posted May 15, 2010 I ended up using rtv and it worked. I haven't tested it much yet but looks to be solid so far. :D Quote Link to comment
Logical1 Posted May 15, 2010 Report Share Posted May 15, 2010 My boot was torn but not missing material and I tried some of the new loctite super glue 'gel' has been holding strong for months now and I shift hard and fast... That what she said ;) Quote Link to comment
Lude944 Posted July 6, 2010 Report Share Posted July 6, 2010 im gonna have to remember this mine looks to be going.. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.