napz510 Posted October 30, 2009 Report Share Posted October 30, 2009 We're doing a Ka swap so we don't need this anymore. Comes with the radiator, su carbs, headers, msd ignition coil, 5 spd tranny and the L18 motor. There's no problem on the motor or tranny. Thanks... [/img] [/img] [/img] [/img] [/img] [/img] Link to comment
datto510 Posted October 30, 2009 Report Share Posted October 30, 2009 Where are you located? Link to comment
napz510 Posted October 30, 2009 Author Report Share Posted October 30, 2009 Where are you located? Sorry........ Orange County, Fullerton Link to comment
jovial_cynic Posted October 30, 2009 Report Share Posted October 30, 2009 What size are those SUs? Link to comment
napz510 Posted October 31, 2009 Author Report Share Posted October 31, 2009 What size are those SUs? Not sure if it's 36 or 38.. Link to comment
72dyme Posted October 31, 2009 Report Share Posted October 31, 2009 The motor has a brand new timing chain, tensioner, and guides. It also has has brand new clutch, preassure plate, throw out bearing, and clutch slave cylinder. The radiator was purchased at mac's radiator in bellflower about a year ago. The clutch and timing chain parts were installed with the help of a couple of fourm members. Link to comment
benzo Posted October 31, 2009 Report Share Posted October 31, 2009 not a bad deal if it is as clean as it is shown and reliable. If I was closer I would buy and have it to slap in a car and go. Link to comment
napz510 Posted November 1, 2009 Author Report Share Posted November 1, 2009 Dogleg? No, it's not [/img] [/img] Link to comment
RadioRedline Posted November 1, 2009 Report Share Posted November 1, 2009 how much to ship to regina, sk Canada s4r7e3 Radio Link to comment
napz510 Posted November 1, 2009 Author Report Share Posted November 1, 2009 how much to ship to regina, sk Canada s4r7e3 Radio Sorry, I prefer local pick up only. Link to comment
RadioRedline Posted November 2, 2009 Report Share Posted November 2, 2009 Brotherin! Im really interested, I would pay the shipping of course! Let me know what theyd charge Thanks Again Radio Link to comment
NICOYA Posted November 2, 2009 Report Share Posted November 2, 2009 hello ratsuneeeer who ever buy this engine it won't regrets a lot of ratsun guys and ratsun ladies know this engine and the car that's came out off and the owner. is a every good reliable engine set up :) [/img] [/img] Link to comment
datzenmike Posted November 2, 2009 Report Share Posted November 2, 2009 You don't often see the oil fill hole on the right side..... Link to comment
hang_510 Posted November 2, 2009 Report Share Posted November 2, 2009 Brotherin! Im really interested, I would pay the shipping of course! Let me know what theyd charge make it worth my while and ill go get it & crate it up. its up to you on the border ha$$le! Link to comment
NICOYA Posted November 2, 2009 Report Share Posted November 2, 2009 You don't often see the oil fill hole on the right side..... you got a good point datzenmike but in this case i saw this engine running on the street and on the fwy and i didn't see anything coming out Link to comment
Hurley Posted November 3, 2009 Report Share Posted November 3, 2009 could I drop that set up in my 521 without many mods? Link to comment
datzenmike Posted November 3, 2009 Report Share Posted November 3, 2009 you got a good point datzenmike but in this case i saw this engine running on the street and on the fwy and i didn't see anything coming out I've been looking through my photos and 'stuff' for one with the right side fill. Also the bung has the older style square shape for a wrench. Most now take the end of a 3/4" drive ratchet to loosen them. Curious that's all. Link to comment
napz510 Posted November 3, 2009 Author Report Share Posted November 3, 2009 could I drop that set up in my 521 without many mods? Never work on the 521 yet but I think tranny support and driveshaft are the mods on that, not sure though. Link to comment
Cuts metal like mad Posted November 3, 2009 Report Share Posted November 3, 2009 I've been looking through my photos and 'stuff' for one with the right side fill. Also the bung has the older style square shape for a wrench. Most now take the end of a 3/4" drive ratchet to loosen them. Curious that's all. My 77 280z 5spd (FS5W71B) looks identical to the tranny in the pics. Link to comment
stilltwisted Posted November 3, 2009 Report Share Posted November 3, 2009 72 dyme i tried to send you a pm your mail box is full Link to comment
napz510 Posted November 5, 2009 Author Report Share Posted November 5, 2009 Anyone interested??? Link to comment
Nice140Y Posted November 5, 2009 Report Share Posted November 5, 2009 What's the mileage? Is the tranny working well (smooth) Thanks. Link to comment
jun Posted November 5, 2009 Report Share Posted November 5, 2009 Anyone interested??? sent you a PM with a few Q's. Let me know. Link to comment
Recommended Posts