myfairlady Posted September 6, 2009 Report Share Posted September 6, 2009 I need a wiring harness for my 1972 521. in great shape. if anyone has one contact me. Mine is fried. Link to comment
tdaaj Posted September 7, 2009 Report Share Posted September 7, 2009 i may have one, do you need everything from tail lights to head lights? Link to comment
myfairlady Posted September 7, 2009 Author Report Share Posted September 7, 2009 i need for front to back tail light ect, also need single point distributor. how much including shipping for harness? paypal ready!!!! Link to comment
Pacific coast Datsun Posted September 7, 2009 Report Share Posted September 7, 2009 I may have one in a box in the garage,,yours free if i still have it. It may just be the engine bay harness, is that ok ? Link to comment
myfairlady Posted September 7, 2009 Author Report Share Posted September 7, 2009 i can pick it up or you can ship. i will pay thanks mark Link to comment
EvilTwin182 Posted June 16, 2012 Report Share Posted June 16, 2012 I need the engine bay wire harness in good shape for 1972 521 mine is fried Link to comment
jcvilla Posted July 14, 2012 Report Share Posted July 14, 2012 I have wiring harness engine and in cab Link to comment
420n620 Posted July 14, 2012 Report Share Posted July 14, 2012 I need the engine bay wire harness in good shape for 1972 521 mine is fried is it the same as the 521 with a J series motor ?? Link to comment
DanielC Posted July 14, 2012 Report Share Posted July 14, 2012 J series will be different. J series have the ignition coil on the cowl, by the windshield. L series have the ignition coil on the left inner fender, close to the front of the truck. Link to comment
420n620 Posted July 14, 2012 Report Share Posted July 14, 2012 J series will be different. J series have the ignition coil on the cowl, by the windshield. L series have the ignition coil on the left inner fender, close to the front of the truck. so all a person needs to do is lengthen the coil wire to make it work ?? and Thanks Dan, Link to comment
banzai510(hainz) Posted July 14, 2012 Report Share Posted July 14, 2012 I worked on a J series 520 and there wasnt a hot start wire but the RUN with Key On wire was all that was needed. I dont think there is a ballast resistor either so hopfully you still got the stock coil as I dont know the ohm reading as they one I worked on the guy put a Blaster 2coil and I replaced it with a stock 510 and added a ballast to be safe.Keeps bunts from burning up Yes you can route the wire back Link to comment
Recommended Posts