philcas1987 Posted June 2, 2011 Author Report Share Posted June 2, 2011 Hey Phil I have the same kit on my wagon and I have fit 15"x6" +15 Panasports over them without an issue its all based on the inside design of the wheel and where they mount the wheel weights Clayton Cool! Because I'm liking panasports or longchamps. Think I should run the booster with this set up? Quote Link to comment
philcas1987 Posted June 2, 2011 Author Report Share Posted June 2, 2011 Those are the 12.2" rotors on stock 510 hubs with 4 piston Wilwoods .... . . I had the wheel weights in the wrong spot with 16x8 panasports and the weights hit the calipers the 16x7 Panas had a better design for clearance ... .. .. and the rear rotors are 11.5" 300zx floating rotors and 2 piston Wilwoods ... 15's would probably fit Indy has 16's... Quote Link to comment
philcas1987 Posted June 2, 2011 Author Report Share Posted June 2, 2011 Shot the hood and back half of the quarter today! Quote Link to comment
Laecaon Posted June 2, 2011 Report Share Posted June 2, 2011 you know you want to paint your wheels and be like me! Quote Link to comment
philcas1987 Posted June 2, 2011 Author Report Share Posted June 2, 2011 you know you want to paint your wheels and be like me! That's how we roll! Quote Link to comment
69FJWagon Posted June 2, 2011 Report Share Posted June 2, 2011 Cool! Because I'm liking panasports or longchamps. Think I should run the booster with this set up? I personally dont like boosted brakes ( I want to remove the booster from my KC)I like getting feedback from the pedal... here are a few pics of my old 510 with the 12.2 rotors and wilwoods behind 15" Panasports Quote Link to comment
philcas1987 Posted June 4, 2011 Author Report Share Posted June 4, 2011 I personally dont like boosted brakes ( I want to remove the booster from my KC)I like getting feedback from the pedal... here are a few pics of my old 510 with the 12.2 rotors and wilwoods behind 15" Panasports Nice! There they are. Thanks Quote Link to comment
philcas1987 Posted June 4, 2011 Author Report Share Posted June 4, 2011 Had to pull the dent before i replace the rotted rocker. From the door to wheel well. Sealed both sides. Pics only show the patch panel though. And welded all the rocker trim holes Now the fun part begins...bodywork Quote Link to comment
philcas1987 Posted June 8, 2011 Author Report Share Posted June 8, 2011 The shell is in primer !!! Finished up the front half of the quarter. Then atom helped me seal the floor pans. The floor pans weren't bad at all. Had to wire wheel it all . The sandblaster didn't like por15 Laid down the carbon fiber filler as my base. Then regular filler to smooth it out. Hate rockers. Dust always seem to land in my face Next step is finishing up the engine bay and painting that! Quote Link to comment
Sinnful Posted June 8, 2011 Report Share Posted June 8, 2011 Lookin good buddy lookin good Quote Link to comment
izzo Posted June 8, 2011 Report Share Posted June 8, 2011 I am curious phil, or anyone who knows... I see it primered in gray, then the last photo shows black and gray. How/whats that about? Did you shoot some black on there and sand it down some to make sure its smooth/straight? Quote Link to comment
Sinnful Posted June 8, 2011 Report Share Posted June 8, 2011 I am curious phil, or anyone who knows... I see it primered in gray, then the last photo shows black and gray. How/whats that about? Did you shoot some black on there and sand it down some to make sure its smooth/straight? yeah usually people do like a rough over coat to check for high/low spots when you start blocking out the body Quote Link to comment
Laecaon Posted June 8, 2011 Report Share Posted June 8, 2011 Guide coats FTW!!! black is a very good color to use. Where ever the black remains means there is a bit of a valley there. Looks pretty good! Quote Link to comment
victory Posted June 9, 2011 Report Share Posted June 9, 2011 Phil has been working hard! Quote Link to comment
Guest DatsuNoob Posted June 9, 2011 Report Share Posted June 9, 2011 Way to go Philthy Phil!! :thumbup: You sir, have reached baller status :cool: Quote Link to comment
philcas1987 Posted June 21, 2011 Author Report Share Posted June 21, 2011 :-_- -_- -_- -_- -_- :rolleyes: -_- haha !!!!!!!!!! Fuck this tranny!!! For sailing !!! Make offerzzzxxxxxxzzzzzz Quote Link to comment
510kevin Posted June 21, 2011 Report Share Posted June 21, 2011 :-_- -_- -_- -_- -_- :rolleyes: -_- haha !!!!!!!!!! Fuck this tranny!!! For sailing !!! Make offerzzzxxxxxxzzzzzz sell me your bb taillights????? Quote Link to comment
philcas1987 Posted June 21, 2011 Author Report Share Posted June 21, 2011 sell me your bb taillights????? Gone homie. Owned those shits for an hour. 68 euro with center garnish ftw!!! Infact I want a coupe with 68 tail lights Quote Link to comment
510kevin Posted June 21, 2011 Report Share Posted June 21, 2011 Gone homie. Owned those shits for an hour. 68 euro with center garnish ftw!!! Infact I want a coupe with 68 tail lights dammit!!!! :hairy: Quote Link to comment
philcas1987 Posted June 21, 2011 Author Report Share Posted June 21, 2011 dammit!!!! :hairy: Haha you seen my tailights at canby. Those things don't fit right around the liscence plate area. I know of a set. Nos will cost you over a g Quote Link to comment
goichi1 Posted June 22, 2011 Report Share Posted June 22, 2011 what??? selling it?? you are kidding right?? Quote Link to comment
philcas1987 Posted June 22, 2011 Author Report Share Posted June 22, 2011 what??? selling it?? you are kidding right?? I'm joking . But everything is for sale for the right price. I really want a coupe Quote Link to comment
Laecaon Posted June 22, 2011 Report Share Posted June 22, 2011 OICS!!! I want to see progress! Quote Link to comment
philcas1987 Posted June 30, 2011 Author Report Share Posted June 30, 2011 Parts progress !!! These past few weeks I've been up and down the west coast scouring parts. Even had some brought down from Canada eh. Thanks to Byron, boaty, slodat,Hector,Jose, and huge thanks to Michael spreadbury for the much needed 68 hood hinges and the trunk lid. Oics of the loot! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.