dat521gatherer Posted May 20, 2009 Report Share Posted May 20, 2009 I need a block off plate for my l20b intake manifold. The cheesy one i made many years ago is leaking air. I know one of you can fab one up for me:) i will pay the cost and shipping. I'd do it myself but i have no machining tools. I can make and send a cardboard template if needed. Link to comment
datzenmike Posted May 20, 2009 Report Share Posted May 20, 2009 Didn't you keep the EGR mani?? :D j/k Link to comment
ariascarlos1990 Posted May 20, 2009 Report Share Posted May 20, 2009 why don't you just get and l16 intake? Link to comment
datzenmike Posted May 20, 2009 Report Share Posted May 20, 2009 They have smaller diameter runners. Link to comment
dat521gatherer Posted May 20, 2009 Author Report Share Posted May 20, 2009 yes mike i removed all that good stuff a little more than 10 years ago:D. the plate i cut out is super thin. i wanna just stay with this mani. i suppose i can come up with something but it wont be pretty. does anyone have a 3x5 1/4 inch piece of aluminum i can play with? Link to comment
Phirus Posted May 20, 2009 Report Share Posted May 20, 2009 yes mike i removed all that good stuff a little more than 10 years ago:D. the plate i cut out is super thin. i wanna just stay with this mani. i suppose i can come up with something but it wont be pretty. does anyone have a 3x5 1/4 inch piece of aluminum i can play with? go steal a road sign.. Link to comment
dat521gatherer Posted May 20, 2009 Author Report Share Posted May 20, 2009 go steal a road sign.. thats what i used on a 620 i once owned. it was a bit on the flimsy side but i may have something around:D. i want over kill thick 1/4 to 3/8. Link to comment
Pacific coast Datsun Posted May 20, 2009 Report Share Posted May 20, 2009 Could you possibly use some gasket sealer behind your current plate to stop the leak ? Link to comment
hang_510 Posted May 20, 2009 Report Share Posted May 20, 2009 cut & fold an AL can ;) go steal a road sign.. those are for floor boards replacement only!!! Link to comment
ariascarlos1990 Posted May 20, 2009 Report Share Posted May 20, 2009 So you want one like mine. :D [/img] Link to comment
bagged_datsun Posted May 20, 2009 Report Share Posted May 20, 2009 So you want one like mine. :D [/img] wounder where that came from??? Link to comment
ariascarlos1990 Posted May 21, 2009 Report Share Posted May 21, 2009 wounder where that came from??? :D Link to comment
datzenmike Posted May 21, 2009 Report Share Posted May 21, 2009 yes mike i removed all that good stuff a little more than 10 years ago:D. :D Hey, just keeping up my smog Nazi rep. 1 Link to comment
dat521gatherer Posted June 11, 2009 Author Report Share Posted June 11, 2009 thank you jesus for stepping up to the plate.i now have a awesome block off plate. excellent work my friend. Link to comment
yello620 Posted June 11, 2009 Report Share Posted June 11, 2009 So, where did you run your PCV valve too? Link to comment
dat521gatherer Posted July 3, 2009 Author Report Share Posted July 3, 2009 i hooked up a couple hoses so i can now drill a hole for a pcv valve. reconnected my valve cove blow by also. aren't you proud mike? Link to comment
mklotz70 Posted July 3, 2009 Report Share Posted July 3, 2009 ...uumm......I'm guesing I'm the mike :) Great stuff! Glad you're getting it done! I still have 4 blocks of AL sitting here waiting to be turned into block off plates. I'm guessing they'll get done when I need one for my L20b :) Sorry I couldn't get to it. Link to comment
Recommended Posts