metalmonkey47

It's just a little primer ;) I just wanted to go ahead and have it ready as soon as the temp drops outside. I'm gonna finish mixing the new color and as soon as I'm ready to lay down the color I'll let you know :) Gonna try and get '70dime in too and we'll have a fucking ball of a day.

Just setup an 81 210 rear suspension on the back and you'll solve the leaf issue. They use a 4link rear with coils. As soon as I start driving my car, it's getting slammed like no 210 you've ever seen before.

Use a gasket set for the whole engine is recommended, but oily surfaces can be sealed with Permatex Black gasket sealer. Messy stuff though.

I filed down 2 sides and still can't get it gripped with vise grips Guess I'll drill and tap since my welder is a POS.

Sounds like maybe you have an L20 engine with an L16 valve cover? Can you see any castings on the engine block? Also, for pictures use the IMG code that photobucket provides. Also, I doubt that your engine is producing enough power to damage the tranny. For a Weber carb, post in the "parts wanted" and you may be able to find one. You'll need to purchase an adapter though.

is that the neighbors dog?

its what i do

shit happens bro lol

he is in my prayers again tonight. hope he is back soon

That price kicks so much ass, i almost want to buy one just for the hell of it.

hahahaha I'm laughing so hard I got tears in my eyes. The best part is, I can actually picture that happening!

Minimal wiring is simple. Off the top of my head,you'll need ; temp sensor, oil pressure sending unit, alt signal and power, starter, switched 12volt choke wire (assuming it's electric.) and anti-dieseling solenoid distributor wiring (I think the A14 is electronic, but I'm not sure) coil wiring from distributor Theres a few more things I'm sure I'm missing, so I'll add on more in the morning unless someone else can chime in.

Now that you mention it... lol http://community.rat...um-brake-truck/

Hey guys, I need a fender (both if possible, but mainly driver side) for a 210 as well as wiper cowl. I'd prefer not to ship, as I don't have the money for big items, but if the price is right and you can ship, I may be able to. I need minimal rust on both. Thanks!

I'll get a picture with my A15 and minor emissions tomorrow. I've pulled everything excepts the EGR piping. The EGR valve is gone and I made a blockoff from some aluminum and used a new EGR gasket with it. Also replaced the standard carb with a Weber 32/36 DGV which meant I had to re-route vac lines as well as wiring.

Alright, here's my plan for tomorrow; 1. More PB blaster 2. Apply heat to stretch the aluminum 3.File down 2 opposing sides to create a spot to grip. 4. Try the vise grips again! Hopefully I can get it out If I can get that done early, I'm gonna clean up the garage and install my 4point harness and re-wire my dash.

That's cool! Thanks for sharing.

I just HAD to save that picture! Fucking sweet!

Welcome to Ratsun! Any cool pics would be nice. We love anything here that's cool. Glad to have ya here and hope to see you contribute!

Did you check craigslist? I see tons of them around here in the ATL.