metalmonkey47

I actually don't plan on selling that right now, since it's a local Nissan plate. I also had one guy call dibs via PM a few hours before you posted. If I decide to sell it, I'll make sure you're #2 if it comes to it! Someone just called that VIA PM, if he falls through or doesn't get back to me in a day or so, I'll make sure it gets to you!

Her new resting place while I mod the shit out of her and clean her up. I want NO MORE GREASE/DIRT/ETC. Trying to decide how to tear apart the shocks without spending money on expensive tools... need to clean up some rust!

It's home and runs! Runs like shit, but it runs!

For L series. Trying to help a buddy get his truck running again and we're gonna go ahead and get rid of the points.

Yeah, thats the truth lol. Not a lot, and if they do they're typically in such bad shape that parts are useless. Gas tank's around here aren't easy to come by with no leaks.

Yessir! Especially on trucks, at the front on the seam behind the brackets where the water running out of the bed collects. Not sure HOW other people got JB weld to work, because mine is STILL leaking!! I filled it to 3/4 of a tank with no leak, so I topped it off and now it leaks. makes no ffing sense.

PM incoming

Better then some to be honest. It's not too bad, but I'll get a picture tomorrow for ya!

Holy cow, that's wild.

3 1/8. Autometer P/N is 1396 http://www.summitracing.com/parts/ATM-1396/

Thanks Mike! I'll correct that.

Looks aftermarket to me.

I have not. I'm off all day tomorrow, so I'll have a chance early tomorrow. No way it's a backfire, I can feel a drag as soon as it does it. It feels like it's in the brakes, which is why I was surprised that it stopped when I greased the king pins.

Front bumpstops, correct? Lets see em!

I hate to say this, but THE NOISE IS BACK with worsening symptoms:( This may or may not be related, so I'll let you decide. The noise came back and now I'm hearing it from both sides. When I get the nice 'pop' I can feel the truck start to decelerate. NOW, since lubing up the front end, I've noticed that the front end likes to 'walk' to the right when I let off the gas pedal and occasionally just driving around. It does it worse at high speeds and YES I checked my lug nuts. Coming to a stop at low speeds, I hear a loud squealing that's almost certainly the brakes. I feel like my brakes are probably dragging, and I have a feeling you'll probably agree, but we'll see. It's strange that this has started to become an issue suddenly.

It's spring cleaning in the house of teh monkey and all must go. Anything still here in 2 weeks will be tossed, so get it while you can. I don't plan on having it all very long. All prices are OBO unless otherwise stated.. Z20E Cylinder head. Little light rust on it, but it's in pretty good shape. Came off of a healthy motor. --$50 +shipping Stock 620 radio. Condition ukn --$10+shipping PENDING EGR counter and/or other thingy? --$5 per +shipping 620 Rearview mirror and carpeted sun visors --$10+shipping for all 3 Stock 620 airbox. Small bend inside. --10+shipping L18 A87 (I think?) Exhaust manifold --$50+shipping IGN Coils. from left to right -L series points coil -L series EI coil PENDING -A series EI coil <<No bracket included. ----$5 each +shipping L20B dizzy pedstal --$5+shipping PENDING Fan shrouds. '81 B310 w/ A15 '76 620 w/L20B ----$5 each +shipping Z20E Dizzy. Unkn condition. I was told it was from an '81 200sx --$15+shipping EDIT: Unkn Oil pump. Not sure what motor, but i'm sure it's Nissan. --$5+shipping Dizzy shafts. Unkn motor's. --$5+shipping each A series clutches. Good shape with little wear. My old trans leaked, so I had it down a few times and had spares. --$5 for 1, $8 for 2 +shipping. 620 horns w/o brackets --$5+shipping B310 ignition w/o key --$30+shipping Switch on back is new Autometer Speedo --$69+shipping FIRM This speedo is BRAND NEW, but never used. I mounted it in a dash once, but never bothered finding a cable. Payed $100 new.

Workin on the 15's tomorrow ;) Maybe have them mounted on the truck in a few weeks. I'm gonna leave some cure time for the paint while i'm in FL visiting the GF. Just finally took a drive in her after finishing up the gas tank. Found out that JB 2 part epoxy is fuel resistant and tested, so I decided to give it a shot as a temp fix until I find a better tank. I spent 4 hours sanding the tank and cleaning the rust holes. I soaked the tank in high zinc primer, so it will never rust again, and sealed with nice paint. The JB Weld has been curing for 16 hours, and the tank is mounted with gas in it now, so It's time to go see how it's going.

What's your reason for removing the front clip? If you drill out the spot welds, you could easily bolt it all back together.

Ouch. Never sold one of those garbage reman water pumps before, but I always figured they were garbage.

It's just THAT good.

Price going up if I take the time to finish polishing it.

Sorry, the meeting is a PITA. There's so much crazy ass-ness in the video. Speaking for ATL drift are @... Turner Drift organizer- 3:00 Howard Smith ATL Shop Owner and Datsun owner- 5:08 Kelly Lewis <<BTW, she calls out Howard Shook too. LOL ATL Resident and Drifter Mother- 9:10 Valerie Waters ATL Resident and Drift fan- 13:15 Amie Ciantos ATL Drifter- 18:47 Name unkn ATL Drifter- 19:35 Ryan ATL Drifter- 20:30 Junious Brodnax?? ATL Drifter- 21:47 Duprie <What she spoke about, I actually had a thread on here about. This was the girl Z owner that just about killed herself one night in a drift accident that's lost the use of her legs because of what were fighting against. ALSO Not part of the drift related notes, but @ 16:45 some crazy is speaking pure babbling shit that was kind funny.