I worry after this people wont wana buy wheels from here if they have a good price, like the equip ones I have I plan on selling pretty cheap cause taxes are a motherfucker and the 510 I was gonna buy fell through.
enough police reports and such get filed on the guy then they might investigate them and see about doing something.. but a lot dont bother after loosing cash on the net.
With the weather going to be creeping up into the 75 range soon, I've decided the time to paint is now. http://www.crankshaftcoalition.com/wiki/John_Deere_Blitz_Black_paint I found this flat black paint from John Deere called Blitz Black.
Its cheaper then the primer I bought thats flat black and wont get chalky.
should really contact law enforcement on this if you really believe you've been scammed.
You might also contact the lovely Ratsun staff on this, as they may have ways of getting deleted messages back.
I'd look at replacing the leaf springs or getting them restored.. As for the wiper if its a 3 switch then it might just be an on and off configuration might check if the switch is grounding out allowing them to run. (less the power goes through the switch, then your switch may just be bad.)
I had TDU1, yeah the physics are lame but beat most games on the fact you could goof off on a section of road with friends in ways that would have cops all over you in real life.
if you can fit a 15" or a 13" rim on the car then you'll be fine.
If you are really wanting some JDM rims I might have a set in 13" coming up for sale as this 510 deal looks like its falling through.
Nope, dattos run 114.3, those are 100. Will have to run adapters which aren't evil but require checking them or you might loose a wheel. :lol:
Not gonna rag on copy wheels, but remember you get what you pay for on quality.
edit:
http://www.wheelandtiredepot.com/hdrsb.htm
OG Sakuras seem to only be available in honda lug patern FYI, I've looked already. :lol:
Work wheels make the Equip series again, you can find them cheap now.
If the KA doesnt fit (doubtful cause if it will fit in a roadster it will fit in a 411) If you are looking at smaller more common USDM engines, a miata engine would work fairly well. There is a well documented roadster swap to the BP1.8 and it was fairly straight forward and almost zero cutting needed.
I'd think the exhaust, oil pan, alternator and intake would the main issues on this swap. I know the oil pan is a slight issue on the roadster from what I've read.
I'd go for something a little larger, like an L20 but also the R16 needs the datsun transmission as the only two compatible with it without custom work are the 5 speed and 4 speed.