Pumpkn210

Ha Ha, yea I got ADHD too ;) An Oic is a Fancy way to say Pic that is a short term for Picture! Thats just how we roll! And the datsun strut has a nut that holds a shock insert inside the strut body. You dont have to compress it to take it appart either! To get the rear springs out all you have to do is remove the shocks and hang the suspension! Anything else there Zippy? :lol:

Ok thats alot to go thru in this thread. Go to the body/paint section for info on your rust prollems. It will prolly need a slave cyl I have had to do that to both my 210s! The shocks go into your strutts after you remove the strut from the car! But FIRST THING you do after you get the car is take alot of good thurough oics(pics) of it and post them on the forum. We need the oics to live! And you will get better help if you do! Make sure to try to use the "Search" funtion on the site before asking what may be seen as a stupid question.

You can cut the coils all the way around, but you need to get some good shocks to prevent bottoming out! Suggestion KYB Gas A Just. In the rear I used cut 72ish 510 rear springs cause they are stiffer. Did this in my 79 GooN and 210 sedan! Cut them down one coil, if thats not low enough, cut 1/4 at a time and dont go down more than 2 full coils. In the GooN the strut towers were cut out and raised up 1.5 in. It helped alot to keep some susp travel. I love my 210 and welcome to the forum, Now you HAVE TO post some oics of your rides! ;)

You liked it!

YAY! :hyper:

Pumpkn's Tire Stretch Reaserch Thread Coming Next Spring! Save your conjecture, 4 then we will find out 4 shore! ;)

I think so :lol:

Back on track, this thread is about datsuns not email... :P

Word, both of my fuel pumps are High! Both mounted on the pass strut tower. Not a big deal unless you run out of gas..... gotta prime errything!

Not Much Sausage? Shenanigans! Sounds like it was a blasty blast, may check that shit out next year.

Noob Loves the Sausage! :lol:

Depends on f its a push or a pull pump. The push pumps "Should" be as close to the tank as possable! If its a pull it can be anywhere, best to have it as low as possable. Easier to pump if gravity isnt a prollem!

Ha Ha PWNED!

Damn, Calley lost some weight!

Ratsun Group :P Ratsun.net Photo Album

I just wanna tell you both good luck, were all counting on you!

Glad to see you on here FINALLY! Cars lookin good! :D

Gonna Being There!

Form > Function! :lol: