Cleopatra Jones

Scccccooooooooorrrrrrrreee!!!!!! Seeker > 620 KC pulled this for me on his way to Canby. He made a pitstop in WA. Finally! Something in my damn color! It is sweeeeeett! Yes, I squealed like a girl when I saw it :w00t: :frantics:

I saw that. Posted it in the Nissan Jam thread. At least someone gives Stanley the recognition he deserves.

I'll be there but not with Stanley. Getting a part from the seeker :)

Here I am! :rolleyes:

Stanley got a nice little write up again. You'll see him half way down the page. http://japanesenostalgiccar.com/2015/06/12/events-2015-nissan-jam-part-02/

Ugh! I don't know why I forget about 3D printing. I've only had something printed for the car before. If I knew how to use the program properly (and had over $3k to spend on the program) I'd probably make all kinds of stuff to be printed. Printers are pretty reasonable though. Might have to rob a bank to get the program. Which program are you using to create stuff? Just out of curiosity.

The rod is 4cm diameter. Didn't have a mm ruler :) I didn't get a measurement of the hole cause I don't want to take out the clips I have in there. It's difficult not to ruin it. I've got some extras in storage. What/how did you make yours out of?

Great song from a movie so bad it's good.

Of all the vids I've seen posted already everyone leaves out the Sunnys. Bastages. Found this one though.

Part number for hatch weatherstrip is 90310-H8700. Unfortunately Nissan doesn't have them anymore but that might help in your search. Sometimes aftermarket ones give you the part number they replace. What else you looking for?

Paint it. Mine was blue.

Jack handle clips no longer available. Part number 74896H8500. Worked on the 200SX and 210. I was going through my notes of part numbers I've collected over the years and found it. I forgot I had inquired about them a while back. So at least you know which car you can pull from if you need any. I grabbed some from a junk car a while back already. Hood rod clip still available. 210 and Altima use same clip. The 210 was white and more expensive for some reason. Part number 65722-01E00. The Altima was black. Part number 65722JA000.

Today we went to the Nissan Jam in West Covina. More pics in the Nissan Jam 2015 thread in events.

I was looking for a new one if Nissan had it which they don't. I've got one I pulled a while back in the car and I just pulled another a few weeks ago which is what we're using to make a mould from. It's not easy to pull one of those without it breaking. I was afraid to take the one I have on my car out and use it for fear of breaking it. I'll be going to my parts guy this week sometime and see about those rod and jack handle clips. I'll post numbers when I get have them.

My parts guy was able to locate a number for this today with a little more searching. I had to go to Nissan today and get something for the Pathfinder. Unfortunately they don't have those clips any more. Part number is 78850W5800 and also works on the 720 which is good to know. As for the hood rod clip they got plenty but I'm going to take in the hood rod as well as my jack handle cause the clips look the same but are most likely different sizes. When I get it worked out I can post part numbers if anyone wants them.

Wouldn't doubt it. There are some 720 parts that are compatible with the 210. I believe some 200SX parts are compatible with the 210 as well. Not sure which ones though. I dare say those clips were used in many models.