Jump to content

Tristin

Senior Member
  • Posts

    14,508
  • Joined

  • Last visited

  • Days Won

    136

Everything posted by Tristin

  1. And stair walking robots :rofl:
  2. Did you end up saying which side you needed for fenders? Theres a decent set up here (3hrs away), but could be brought down in a couple weeks for Canby.
  3. Is that the car that had the same lines continuing into the interior? I remember a car with a red and blue stripe sewn into the interior and along the parcel tray in the back.
  4. Damn 4x4 status right there...
  5. Because its not just a stripe. Its like calling BRE stripes just stripes...
  6. Tristin

    Graphic?

    Didnt see the new ones... let me check.
  7. Ive never heard it called Day Two stripe, but Ive heard Yukachan line or 89 Degree line.
  8. Thats some clean 911 right there!
  9. Just rock 3 cylinders... Metros do it all the time.
  10. Also seems your Yukachan line is backwards. Did you do both sides or just the one?
  11. Car looks good... you should have followed the red stripe onto the rocker under the door though... its a bit weird that it just stops at the door.
  12. No just passing... though if Im still sick, Im sure Ill be asleep while this goes on.
  13. Hopefully Im not too sick to go. Stayed home today... still need replace the drivers side half-shaft to be able to make it. I might have to sit this one out. Ill just prepare for Canby :hyper:
  14. If you have that much gap in the rear wheel wells, then 195/70s will fit fine. Its only an added 19mm in height.
  15. Tristin

    1200's unite!!!

    Ive posted in there many times, how did I forget thats a thread? :blush:
  16. Tristin

    1200's unite!!!

    Theres no Sunny thread so I throw them all in here :D Its a rectangles and squares thing ;)
  17. Tristin

    1200's unite!!!

    [Moved to proper section because Im an idiot]
  18. Temp gauge is in the thermostat housing where the radiator hose meets the block near the intake manifold. There should be a yellow wire attached.
  19. Yes. Obviously if there is nothing filtering the air, particles can get into the motor... An airbox or filter balls or socks will be needed to keep the air clean. Dont pour a bunch of money into a rebuilt engine and skimp on a small part just for your "swag factor."
  20. I know! Im trying for a 521 :D The right one just needs to come around...
  21. If the half shaft swap happens tomorrow, I'll be there.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.