toyota1515 Posted September 29, 2014 Report Share Posted September 29, 2014 Well, Intake Flange & Runners welded in place for the SR20 webber carb intake, just waiting on engine installation in car to determine and cut out the runners for perfect carbs angle.Yeah this is going very slow but steady. Quote Link to comment
flatcat19 Posted September 29, 2014 Report Share Posted September 29, 2014 That intake looks better suited to a set of R1s than some DCOEs as it sits. Do you have a DCOE flange? Looks great though. Quote Link to comment
toyota1515 Posted September 29, 2014 Report Share Posted September 29, 2014 Yes i do got the DCOE carbs flanges, just waiting on the engine to sit in the car to angle cut the runners for proper carbs angle. 1 Quote Link to comment
toyota1515 Posted October 2, 2014 Report Share Posted October 2, 2014 I did trow the engine and tranny inside the car to see how i am gonna tackle this and so far so good now things are gonna interesting. By the way engine is resting on the stabilizer bar that is why is up in the front like that guys, that stabilizer bar will be taken out for obvious reasons, oh and replaced for a custom one. Quote Link to comment
mrmark Posted October 7, 2014 Report Share Posted October 7, 2014 Diggin it! I'm looking at upgrading to 15's just to have more tire options. Quote Link to comment
toyota1515 Posted October 9, 2014 Report Share Posted October 9, 2014 I am changing wheels again just cuz i am going for the drag look, i really cant stand fat tires up front, the Puerto Rican in me just tell me to go with pizza cutters and 235-60-15 on the back. just like this... 1 Quote Link to comment
flatcat19 Posted October 9, 2014 Report Share Posted October 9, 2014 I wish you were closer. I'd love to make a deal on your wheels. Quote Link to comment
toyota1515 Posted October 10, 2014 Report Share Posted October 10, 2014 Oh sorry they are sold already. Quote Link to comment
toyota1515 Posted October 16, 2014 Report Share Posted October 16, 2014 Well i got a deal i cant refuse and need to replace de $$$, So this is for sale, price will need to be acordingly with what the buyer wants with it. I will post it in the for sale section as i post here. Quote Link to comment
datsunfreak Posted October 16, 2014 Report Share Posted October 16, 2014 I will post it in the for sale section as i post here. Link? Not seeing it in there... Quote Link to comment
toyota1515 Posted October 16, 2014 Report Share Posted October 16, 2014 Look now Quote Link to comment
toyota1515 Posted October 16, 2014 Report Share Posted October 16, 2014 Anyway here it is! http://community.ratsun.net/classifieds/item/4821-juan-castillo/ Quote Link to comment
toyota1515 Posted October 17, 2014 Report Share Posted October 17, 2014 any takers Quote Link to comment
Kirden Posted October 17, 2014 Report Share Posted October 17, 2014 Little too rich for my blood. Good luck with it though. I would've loved to hear the engine with those carbs. Would've been beastly in my 4dr :P Quote Link to comment
toyota1515 Posted October 19, 2014 Report Share Posted October 19, 2014 I will sell engine tranny carbs setup separatelly too Quote Link to comment
toyota1515 Posted October 24, 2014 Report Share Posted October 24, 2014 Wheels tires sold! Quote Link to comment
toyota1515 Posted October 27, 2014 Report Share Posted October 27, 2014 I built the header just like the one was going to be in this car, for a customer from this forum. Just tack weld it and tomorrow will be tig welded, it will be a little shorter too. 1 Quote Link to comment
toyota1515 Posted October 27, 2014 Report Share Posted October 27, 2014 by the way rolling chassis got lower price $800 Quote Link to comment
toyota1515 Posted October 28, 2014 Report Share Posted October 28, 2014 Parting out my Datto, need this gone very affordable now http://community.ratsun.net/classifieds/item/4892-parting-out-my-b310/ Quote Link to comment
toyota1515 Posted October 31, 2014 Report Share Posted October 31, 2014 NEW PRICES ON MY CLASSIFIEDS need this gone! Quote Link to comment
mrmark Posted November 2, 2014 Report Share Posted November 2, 2014 I wish you were parting out the chassis, I need some serious interior stuff, like the front seats…back. I bought the car with a cage in it so I have front seats, a good dash and door panels. I need rear seats w/all the hardware and most of the rear panels. It would help if you moved a little closer to me too! You really need to work on that :w00t: ;) :) Quote Link to comment
toyota1515 Posted November 9, 2014 Report Share Posted November 9, 2014 I am willing to negotiate on this parts and rolling shell, i need it out of here, you guys make your offers http://community.ratsun.net/classifieds/item/4892-parting-out-my-b310-willing-to-negotiate-on-all/ Quote Link to comment
toyota1515 Posted November 12, 2014 Report Share Posted November 12, 2014 All Sold Quote Link to comment
flatcat19 Posted November 13, 2014 Report Share Posted November 13, 2014 To whom? Staying on Ratsun? Quote Link to comment
toyota1515 Posted November 15, 2014 Report Share Posted November 15, 2014 I guess. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.