510 Brake lines and 7/8 Master cylinder installed

[dougfj62]

Took about a day and half of bending, double flaring brakes lines and rerouting in the engine bay. 1000x better the 40 year old lines. Happy with results. 

 

[DARIN 510]

What’s up with that idler a brace mounted on the inside of the idler arm ? Lol

 rake line on the passenger side is pretty all over the place. It should run tightly along the frame. 

[datzenmike]

It's common to brace the steering box to eliminate frame flexing. Probably wouldn't hurt doing the idler arm also.

[Colbino]

Pretty sure the brace goes on the outside in the wheel well. 

[DARIN 510]

17 hours ago, datzenmike said:

It's common to brace the steering box to eliminate frame flexing. Probably wouldn't hurt doing the idler arm also.

Look again. It goes on the outside in the wheel well. Is that how you do yours ? Lol. And I know what that brace does btw. 

[datzenmike]

 

Is not the brace between the idler and the frame? This would move the idler from it's intended position. Not the end of the world but ...

[Stoffregen Motorsports]

On 5/26/2023 at 11:40 PM, DARIN 510 said:

What’s up with that idler a brace mounted on the inside of the idler arm ? Lol

 rake line on the passenger side is pretty all over the place. It should run tightly along the frame. 

I do believe that plate is supposed to be in the wheel well.

 

Also, didn't your mom ever teach you - if you don't have anything nice to say, then don't say anything at all...? 😁