Lookin for new 720 vent glass rubber seals!

[7twentyguy]

Does anyone know where to get replacement rubber seals for the rear vent glass on a 720 king cab?

I’ve looked online with no luck. The ones at the junkyard are always trashed. 
Any help is appreciated!

[720_Jeff]

Think your talking about the side window, molding/weatherstripping, probably just about everyone would like a set.

 

Vintage Rubber in Riverside, CA maybe looking at making these.  As I understand, molds can run $1000's 😞

 

 

[Charlie69]

Curious as to what ST options the blue true pictured has.  Trying to compile a comprehensive list of ST options.

 

This is what I have so far.

Clock, tac, cruise control (2wd automatic transmission only), rear slider, moon roof (sun roof), adjustable speed intermittent wipers, cloth insert bucket seats, factory alloy wheels (85/86?)

Edited August 26, 2021 by Charlie69

[datzenmike]

Electric windows.

 

Charlie what about auto shut off interior light? I had this and put in my 620. When ignition is turned on the light shuts off right away but if exiting there is a 30? second delay.

[Charlie69]

Forgot about that one.  Also forgot power windows, power door locks, volt meter, and oil pressure gauge.

 

I have owned 3 Different STs 84,85, & 86 and all had a diferent variety ST package. Still own the 84.

Here is new list:

Clock

Tac

Oil Pressure Gauge

Volt meter

Cruise Control

Rear Slider

Moon Roof

Adjustable Speed Intermittent Wipers

30 Second Delay Cab Light

Power Windows

Power Door Locks

Cloth Insert Bucket Seats

Factory Alloy Wheels   Sorry about hijacking your thread

Edited August 26, 2021 by Charlie69

[7twentyguy]

Don’t worry about the hijack Charlie,

anytime we can share information I’m cool with it.

My 85 came with most of the items you mentioned, except no cruise, moon roof or 

power locks & windows. It had a sliding back glass ( broke latch ) replaced it with a solid heated one.

It had the alloy ST wheels but they didn’t work so well with the dropped spindles.

[Charlie69]

I put Belltech 2" lowered spindles on my 80 720 chassis under my 66 520.  I will be running 16" wheels.

[7twentyguy]

I ran 16” Chevy Z71 at first,  without grinding on the lower arms the lower arms would scrape the inside of the wheels. I switched to the 18s really quick.

[Charlie69]

I have 16" Isuzu trooper wheels and these seam to clear fine.

 

 

These shaved LCAs would clear factory 14"s but only by 1/8" not enough clearance for me to run.

 

 

 

Edited August 27, 2021 by Charlie69

[7twentyguy]

Shaving down the lowers would have been my next step, but I had a coworker offer to swap the Titans for my stock ST alloys.

 I like the way they fill the fender wells.

 

[Charlie69]

Hell I would have given you 2 sets of Titans for a set of STs and I have had 5 different sets over time.

[7twentyguy]

I know, the mistakes I’ve made in the heat of the moment!

 

[Charlie69]

That is a good looking ST!

[NC85ST]

What Charlie69 said!

[Charlie69]

Contact Jake Makes on here I believe he has a post in the 521 thread.  He might be able to make them.

Edited August 31, 2021 by Charlie69