COOCHaDAMus Posted December 29, 2019 Report Share Posted December 29, 2019 are these coilovers worth anything, because i'm having issues getting hold 82-84 280zx front struts.>>>>>>> https://www.ebay.com/itm/GECKO-RACING-G-STREET-Coilover-for-77-81-NISSAN-Sunny-Datsun-210-303/323272013846?hash=item4b44837816:g:GUEAAOSw0O9bB5wl Quote Link to comment
datzenmike Posted December 29, 2019 Report Share Posted December 29, 2019 Christ in the comics $850!!!!! What exactly are you after? Lowering up to 2"???? Hell you can do that on your original struts for about $30.... and adjustable. This picture is not a 210 strut. Front or rear. Quote Link to comment
COOCHaDAMus Posted December 29, 2019 Author Report Share Posted December 29, 2019 i believe its the 3rd or 4th picture and that hardware looks familiar to me 1 Quote Link to comment
afracer Posted January 3, 2020 Report Share Posted January 3, 2020 Yes they look legit, but unsure about how they'd work on the rear. Typically this type of coilover on the rear will require strengthening and reinforcements to the shock mounts both on top and bottom. The fronts are easy, cut strut tube, weld on new threaded lower section, and now you have a truly height adjustable front coilover instead of crappy/joke adjustable spring perch "coilovers". Quote Link to comment
datzenmike Posted January 3, 2020 Report Share Posted January 3, 2020 So once they are adjusted for ride height, because both are truly adjustable, what's the difference? Well one is $30 (and no welding) riding around doing absolutely nothing and the other is $265 ( https://technotoytuning.com/nissan/210/front-weld-coilover-kit-datsun-210 ) riding around doing absolutely nothing. I mean just how many times a week do you need to adjust your ride height anyway? Quote Link to comment
afracer Posted January 4, 2020 Report Share Posted January 4, 2020 What's the point of a coilover at all if you're never going to tune, change, or adjust it? I don't personally adjust mine much once I find where I like them, but I could never get them there without some form of actual adjustment beyond spring preload only. The cheapest/easiest methods you preach aren't the best advice sometimes, and I'd rather let people know or understand better what they're actually looking at doing. Yeah you'll pay a little more money, but it won't be as ghetto and you'll be able to adjust height and spring preload separately, while maintaining/maximizing shock stroke, which is what most people would, or should want and expect out of coilovers. Quote Link to comment
afracer Posted January 4, 2020 Report Share Posted January 4, 2020 (edited) Here's the ideal type of Datsun McPherson strut turned into coilover, but you'd be paying a lot. The gecko ones above are good too though and almost the same thing, just don't have the extra damper adjustment on bottom, which is fine for 99% of us. Edited January 4, 2020 by afracer Typo Quote Link to comment
datzenmike Posted January 4, 2020 Report Share Posted January 4, 2020 It comes down to cost. If you want to lower your ride height you shouldn't have to spend hundreds of dollars doing it when the money could be better spent on something else. I calculated the spring rate I wanted and trimmed the stock spring. I replaced the hydraulic oil with something with a thicker viscosity to firm up the damping. Hey, I get bragging rights for huge money spent on shiny colorful parts, but I can say I have the same effect for under $50 and I did it all entirely myself without a welder and only an angle grinder. In your eyes that may be ghetto but I didn't have to throw my wallet at it. It's viable option for some. 2 Quote Link to comment
CWhip Posted January 4, 2020 Report Share Posted January 4, 2020 Hey Cooch, I've still got my stock setup with the lower perch cutoff if you want to experiment without cutting yours up. PM me if you're interested. 1 Quote Link to comment
afracer Posted January 7, 2020 Report Share Posted January 7, 2020 After going many years as a cheap skate myself, I'm happy I lived thru some of the crappy mods I did to save money. Having driven on stock suspension, lowering springs, weld on perches, cheaper coilovers, then finally good coilovers I can say that there's no comparison to good coilovers. Rather see someone do it right once than go thru the hassle to eventually realize they should've just waited and gone with what they really wanted. 1 Quote Link to comment
MattSheldon Posted February 7, 2020 Report Share Posted February 7, 2020 On 1/4/2020 at 7:57 AM, afracer said: Here's the ideal type of Datsun McPherson strut turned into coilover, but you'd be paying a lot. The gecko ones above are good too though and almost the same thing, just don't have the extra damper adjustment on bottom, which is fine for 99% of us. What brand are these? Quote Link to comment
afracer Posted February 9, 2020 Report Share Posted February 9, 2020 Matsuoka posted them on their Facebook page. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.