620_Brian Posted July 5, 2019 Author Report Share Posted July 5, 2019 The compressor I have has the single bolt oval shaped style manifolds on each port. I'm not sure about anything being commercially available. I think in my case its going to be all custom tig / brazed or whatever. 2 Quote Link to comment
Stoffregen Motorsports Posted July 5, 2019 Report Share Posted July 5, 2019 Do you know the model number of the compressor? Is it a Denso compressor or...? 1 Quote Link to comment
Stoffregen Motorsports Posted July 5, 2019 Report Share Posted July 5, 2019 These guys sell odd compressor manifolds - https://warrperformance.com/?product_cat=air-conditioning-ls 1 Quote Link to comment
620_Brian Posted July 5, 2019 Author Report Share Posted July 5, 2019 (edited) I'm not sure of the brand - but its this actual one from advance auto (rock auto had a better pic). Those fittings from the hot rod shop might be useful if they fit that compressor. I'll be sure and let my AC guy know those at least may be available. Edited July 5, 2019 by 620_Brian 3 Quote Link to comment
FrankRizzo Posted July 7, 2019 Report Share Posted July 7, 2019 (edited) Hey. Thanks for the info, muy helpful. FYI - Vintage Air make the adapters for the 240SX/Sanden compressor. they are under $15 each. Go here and scroll down to the Sanden #8 and #10 O ring adapters https://www.vintageair.com/hose-kits-fittings/ You can also make your own hoses, DIY style with their kit. Lucky you have a '79....you get extra clearance on the rad support bracket that my '74 does not have. Im having fun trying to figure out how to mount the condenser Edited July 7, 2019 by FrankRizzo 2 Quote Link to comment
Stoffregen Motorsports Posted July 7, 2019 Report Share Posted July 7, 2019 All the info I found on the 240sx compressor came back to Calsonic. Sanden compressors tend to have the ports splayed out, not level with each other. 1 Quote Link to comment
620_Brian Posted July 7, 2019 Author Report Share Posted July 7, 2019 Cool. Almost 🙄 I’ve been trying to mock up different bracket configurations with the OEM compressor. It’s still really tight with hardly any adjustment room thanks to that stupid steering box. At the suggestion of my AC guy I’m now looking at what he called the smallest compressor available. It’s what all the LS swap / hot rod guys use - a Sanden SD7B10. It’s about $150 new with warranty. I’m going to mock one of those up when I have more time to tinker at work. There’s a company called dirty dingo that makes the LS swap brackets that I’ve gotten some ideas from. Something like this but obviously for the drivers side: 2 Quote Link to comment
Stoffregen Motorsports Posted July 8, 2019 Report Share Posted July 8, 2019 That is a small compressor. 1 Quote Link to comment
FrankRizzo Posted July 8, 2019 Report Share Posted July 8, 2019 Great tip, I was just checking out the compressor on Amazon. FWIW, it has a 7 rib belt and the S13/14's use a 5 rib, so I dont know if you can swap? Also - did you mount to the power steering or the old compressor engine mounts? . 1 Quote Link to comment
620_Brian Posted July 8, 2019 Author Report Share Posted July 8, 2019 (edited) Well..I think I can just use a 3,4,5 rib belt or whatever on the 2 remaining crank pulleys. I have the 2 inner ones to choose from. I did the SOHC power steering delete so I'm already running a mismatched belt on the outermost crank pulley. From what I read there are guys that have 1000's of miles with that setup with no problem. I guess that's why I'm assuming I can do the same on the remaining inner pulleys. I do have one of the giant cast OEM compressor brackets, but I've totally scrapped that idea - its just too much. I've been trying to mock up a simple flat 1/4" plate that would use the 4 oem compressor bracket holes on the block. These holes would be slightly slotted for "X Axis" adjustment. Then 4 more holes threaded in the plate for the oem compressor to mount with spacers in the appropriate Z Axis. There's the guy in a link in previous post that did it just like this but it just seems so tight - I think I can come up with something better with that smaller compressor. Edited July 8, 2019 by 620_Brian 1 Quote Link to comment
620_Brian Posted July 8, 2019 Author Report Share Posted July 8, 2019 See the pics in this post. It can be done, but like I said I think I can come up with something better that can be duplicated by others. I'll be doing a acad drawing for the brackets when perfected. 1 Quote Link to comment
620_Brian Posted July 8, 2019 Author Report Share Posted July 8, 2019 (edited) Generic plate I’ve been trying to make work. Not to scale and I'm not positive on the shown M sizes - all preliminary.. Edited July 8, 2019 by 620_Brian 2 Quote Link to comment
]2eDeYe Posted July 8, 2019 Report Share Posted July 8, 2019 Keep in mind, tapping the plate, you will want a minimum 1/2" thick plate for thread engagement. You could use a thinner plate and weld a nut to it. The nut will protrude a bit so that would have to be accounted for. Something like this maybe. https://www.mcmaster.com/93337a800 Edit: This is dependent on the M14 being an M14 :) 1 Quote Link to comment
Stoffregen Motorsports Posted July 8, 2019 Report Share Posted July 8, 2019 (edited) Slotted holes can be a blessing and a curse. It would be nice to not have to run a tensioner, so think ahead about how you will move the bracket to tension the belt. Engineer something in so you're not prying on the compressor. I made a bracket to relocate the PS pump on my 83 Toyota using 1/2" plate. The pump sat too high and wouldn't clear the hood. It has tapped holes for the original bracket. So redeye is correct, make it thick enough to tap. Edited July 8, 2019 by Stoffregen Motorsports 3 Quote Link to comment
620_Brian Posted July 8, 2019 Author Report Share Posted July 8, 2019 (edited) Ya I don’t know why I said 1/4” - the plate we were water jetting was closer to 3/4” actually. But it was just what lying around in the drop pile. Edited July 8, 2019 by 620_Brian 3 Quote Link to comment
FrankRizzo Posted July 9, 2019 Report Share Posted July 9, 2019 If you get it to work - I will pay for a second...so please keep good note!!! Thanks much in advance. . 3 Quote Link to comment
620_Brian Posted October 26, 2019 Author Report Share Posted October 26, 2019 (edited) Late update. It’s running, driving, terrorizing the neighborhood. Also... * bought a tig welder (Miller Synchrowave 210). * learned how to tig (sort of). * built my own 2.5” SS exhaust (sort of). My downpipe to snake around the torsion bar. For me, THIS was the toughest part of the swap. Bear in mind, this is my very first tig piece. Awful welds but it works..for now. Plus it’s all going to change with the coil over conversion 😬. Idling, not overheating...sweeeet. https://vimeo.com/368993248?ref=tw-share Absolute blast to drive now. Exactly what I was going for. next up: * finish AC. * coil overs all around. Edited October 26, 2019 by 620_Brian 4 Quote Link to comment
620_Brian Posted October 27, 2019 Author Report Share Posted October 27, 2019 Already putting it to use. 2 Quote Link to comment
]2eDeYe Posted October 27, 2019 Report Share Posted October 27, 2019 Truck looks fantastic. :) 1 Quote Link to comment
Datsunworks Posted November 4, 2023 Report Share Posted November 4, 2023 Anyone following this post for the AC install I have started a new post here: 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.