pnw210 Posted August 26, 2018 Report Share Posted August 26, 2018 What’s up guys i picked up a crashed 1992 240sx with Ka24de 5 speed. Really clean except it’s been crashed. I only got it to swap the ka into my beloved 1981 Datsun 210 2 door sedan. I was just wondering what else i would need for the swap? Quote Link to comment
pnw210 Posted August 26, 2018 Author Report Share Posted August 26, 2018 http:// 1 Quote Link to comment
pnw210 Posted August 31, 2018 Author Report Share Posted August 31, 2018 Hey thanks for all this great help guys lmfao Quote Link to comment
]2eDeYe Posted August 31, 2018 Report Share Posted August 31, 2018 It's a bit slow in the 210 section. lol If you have a 240sx , then you have pretty much everything you need. There are only a couple of these swaps done in a 210 though so specific information to this swap isn't all that available. Wiring information. The 240sx harness is stand alone and makes the swap a bit easier. 1 Quote Link to comment
]2eDeYe Posted August 31, 2018 Report Share Posted August 31, 2018 Jesusno2 b310 (210 Sunny) KA build. 1 Quote Link to comment
pnw210 Posted August 31, 2018 Author Report Share Posted August 31, 2018 Hey thanks for the reply man. Quote Link to comment
]2eDeYe Posted August 31, 2018 Report Share Posted August 31, 2018 No problem, I got one of these and a KA waiting. So take lots of pics. :) Quote Link to comment
pnw210 Posted August 31, 2018 Author Report Share Posted August 31, 2018 Yah i’ll get everything i do on camera. Been dreaming of this swap for a while lol. No promises on how fast i get it done tho as this will be my first swap. No pressure at all lol. Shes one hell of a car tho and i can’t wait to make her even more fun. Once again thanks for the reply’s my friend! 1 Quote Link to comment
dat521gatherer Posted August 31, 2018 Report Share Posted August 31, 2018 Some reading material here and local. Might have a pointer or two. 2 Quote Link to comment
pnw210 Posted September 1, 2018 Author Report Share Posted September 1, 2018 That’s a great read thanks for the reply man. All i have to gather up now is the can/am box, some 280zx front struts and i would like to find a h-190 over the h-165. Then it’s showtime lol. In the mean time i can get everything i need out of this POS 240 B) Quote Link to comment
CWhip Posted September 2, 2018 Report Share Posted September 2, 2018 I've hammered that H165 more than a few times and it's held up just fine fyi. Any questions, just ask. Quote Link to comment
mhub91 Posted December 25, 2018 Report Share Posted December 25, 2018 Sorry, thread Jack.... @Cwhip I met you many many years ago. If I remember correctly you came over to my house in Spanaway to check out the sway bars on my S110 200SX to compare to your 210. I was working on a dual cam swap in my A10 sedan. ....I totaled that car a few months after finishing, too much power.. Not enough handling haha. Quote Link to comment
mhub91 Posted December 25, 2018 Report Share Posted December 25, 2018 On 9/1/2018 at 6:55 PM, CWhip said: I've hammered that H165 more than a few times and it's held up just fine fyi. Any questions, just ask. Yes, the H165 will hold fine even up against the KA24DE. I beat the royal fuck out of my 1979 A10 with a S13 dual cam swap. Clutch drops @ 5,000 rpm like it was nothing. Quote Link to comment
datzenmike Posted December 25, 2018 Report Share Posted December 25, 2018 Just don't use larger sticky tires. Quote Link to comment
CWhip Posted December 25, 2018 Report Share Posted December 25, 2018 5 minutes ago, mhub91 said: Sorry, thread Jack.... @Cwhip I met you many many years ago. If I remember correctly you came over to my house in Spanaway to check out the sway bars on my S110 200SX to compare to your 210. I was working on a dual cam swap in my A10 sedan. ....I totaled that car a few months after finishing, too much power.. Not enough handling haha. Yup, that was me. I remember seeing what happened to your car. Sux! I've been working on my kid's Baja but I still drive my 210 everyday! I need to find a new transaxle for his car, then I can get back to spending money on MY car. I've done a little to it but not a whole lot. I've had a turbo sitting here just begging to be installed! Quote Link to comment
80datson Posted December 28, 2018 Report Share Posted December 28, 2018 H165 should be okay, but I've broken mine with stock ka, must of been a worn out h165 lol Quote Link to comment
datzenmike Posted December 28, 2018 Report Share Posted December 28, 2018 The 210 uses an H-150 what were you using? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.