sebpv Posted April 27, 2015 Report Share Posted April 27, 2015 Hi guys, Im shopping for rubbers atm. The grommet was stretched, dried and half way torn so Id like to replace it. Any idea of the number from Nissan? I am looking it up on carpartsmanual under wiring and I think it's missing. I appreciate the help Quote Link to comment
ggzilla Posted April 27, 2015 Report Share Posted April 27, 2015 It's part of the harness. Quote Link to comment
ggzilla Posted April 27, 2015 Report Share Posted April 27, 2015 Pull it off the harness. Go down to oreillys or Napa and they'll match up a close fit Quote Link to comment
sebpv Posted April 27, 2015 Author Report Share Posted April 27, 2015 Napa it is then. Ill try that...once I find the grommet...Otherwise: picture Quote Link to comment
datzenmike Posted April 28, 2015 Report Share Posted April 28, 2015 There is one listed for the right hand side from '75. Grommet... #24251-89906 under $5 if available at the Nissan dealer. There is another grommet on the driver's side used up through '74. #24250-89978 $3 Quote Link to comment
sebpv Posted April 28, 2015 Author Report Share Posted April 28, 2015 '75 grommet gone. '74 grommet(numbered 22 and 32 in wiring) is used on the crossmember on the frame. Lets stay positive :/ Quote Link to comment
datzenmike Posted April 28, 2015 Report Share Posted April 28, 2015 Ahh I see it now. The picture looks like it's near the steering column. My bad. Quote Link to comment
Goemon Posted March 9, 2023 Report Share Posted March 9, 2023 Main harness panel hole for 620 = 42 mm Quote Link to comment
Stoffregen Motorsports Posted March 10, 2023 Report Share Posted March 10, 2023 If you google "datsun 240z wiring grommet", I think you'll find what you need. I've searched and searched for good quality wiring grommets and have found another term that works for google - firewall boot. The Daystar firewall boots aren't specific, they are cut to fit, but they work in a pinch and are good enough quality. I've also bought grommets for domestic muscle cars that are good quality. This one is at Z Car Depot Quote Link to comment
Goemon Posted March 16, 2023 Report Share Posted March 16, 2023 Yeah, I don't think it it for a 42 mm panel hole. It looks the same as 620 I used the Z car hood cable & speedo cable & Z car heater hose grommets for Z car on my 620 I have used a LOT of OEM Z car parts on my 620 Summit racing sells the heater hose grommets advertised for Z cars since that is the only car Datsun made, besides the 510 I found all the frame grommets and was trying to work with vendors on Ebay to make a kit, but I haven't found a vendor who carries them all. It's only 4 or 5 different sizes for the frame Like Hoffman's book, " Steal These Pictures " Measurements were done with older caliper so they are correct ( + - ) 1 mm 1 Quote Link to comment
Goemon Posted March 16, 2023 Report Share Posted March 16, 2023 This one is getting made for Right side for LHD 78-79 ONLY There are Japanese made speedo cables on Ebay right now that have the grommet on them Most of the Thai are said to arrive with no grommet. The fiberglass tubes work on the front part of the front parking brake cable. I am trying to rebuild / restore the cables & the boots......Where do you get some replacement boots? Porsche are close to the rears. Motorcycle boots are too small for the rear of the front cable. HELP !!!!!! The cables are one of the first things to go back on 1 Quote Link to comment
Goemon Posted March 16, 2023 Report Share Posted March 16, 2023 With all the Z car guys here, which one knows the size of the main harness panel hole for grommet? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.