503datsun.dude Posted October 4, 2014 Report Share Posted October 4, 2014 Where can I find a bushing kit for my 75 datsun 620? I've look everywhere!!!? Or just in the wrong places.:/ Quote Link to comment
flatcat19 Posted October 4, 2014 Report Share Posted October 4, 2014 What bushings? Quote Link to comment
red13 Posted October 4, 2014 Report Share Posted October 4, 2014 Let me know what your looking for I might be able to help Quote Link to comment
thisismatt Posted October 4, 2014 Report Share Posted October 4, 2014 What bushings? Headlight bushings Quote Link to comment
510freak Posted October 4, 2014 Report Share Posted October 4, 2014 Or just in the wrong places.:/ Headlight bushings Quote Link to comment
503datsun.dude Posted October 5, 2014 Author Report Share Posted October 5, 2014 For my front suspension. The arm that connects to the king pin. Their are rubber bushings. Quote Link to comment
datzenmike Posted October 5, 2014 Report Share Posted October 5, 2014 Upper link bushings... the ones in the top of the king pin to the upper control arm are Nissan part # 54519-08700 About $5 at the Nissan dealer if they still have them available. Try NAPA or any auto parts house. Even try E bay Quote Link to comment
teagueauto21 Posted October 5, 2014 Report Share Posted October 5, 2014 And don't forget about rock auto, they got just about everything for our datsuns Quote Link to comment
Jersey Posted October 5, 2014 Report Share Posted October 5, 2014 Nissan part # 54519-08700 Quote Link to comment
flatcat19 Posted October 5, 2014 Report Share Posted October 5, 2014 Upper link bushings... the ones in the top of the king pin to the upper control arm are Nissan part # 54519-08700 About $5 at the Nissan dealer if they still have them available. Try NAPA or any auto parts house. Even try E bay Nissan part # 54519-08700 Quote Link to comment
503datsun.dude Posted October 5, 2014 Author Report Share Posted October 5, 2014 Front suspension bushings! Quote Link to comment
503datsun.dude Posted October 5, 2014 Author Report Share Posted October 5, 2014 I've tried ebay but they seem to have everything besides what I was looking for but I would like to run thru and replace every bushing in the front end, and another question was. WHAT'S A good aftermarket carb for my truck to. It has the Lamb and intake! I'm trying to upgrade a little Quote Link to comment
teagueauto21 Posted October 6, 2014 Report Share Posted October 6, 2014 Weber 32/36 or the even better weber 38. But if you wanna spend some money get some dual side drafts. Quote Link to comment
datzenmike Posted October 6, 2014 Report Share Posted October 6, 2014 38's too big and is used on V6 and small V8s. 32/36 is still slightly big but has progressive secondary and would be better. With both, you have to step into it to prevent it falling on it's face at low speeds but the 38 is worse. If you were using on a race track and never went below 4K.... the 38. For all other types of driving get a 32/36. Quote Link to comment
red13 Posted October 6, 2014 Report Share Posted October 6, 2014 look at carpartsmanual.com you can see all the parts you need with part number Quote Link to comment
datzenmike Posted October 6, 2014 Report Share Posted October 6, 2014 Upper link bushings... the ones in the top of the king pin to the upper control arm are Nissan part # 54519-08700 About $5 at the Nissan dealer if they still have them available. Try NAPA or any auto parts house. Even try E bay I've tried ebay but they seem to have everything besides what I was looking for but I would like to run thru and replace every bushing in the front end, and another question was. WHAT'S A good aftermarket carb for my truck to. It has the Lamb and intake! I'm trying to upgrade a little Take that number to NISSAN!!! See if they have it. If not, go to an auto supply store and see if they can use that number to cross reference a set. Go on line with that number. This took less than a minute... http://www.jcwhitney.com/perf-accessories-replacement-urethane-body-bushing-kit/p2005796.jcwx?filterid=d50465y1975g2j1 How hard was it? First try, first one to come up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.