delay_me Posted August 20, 2008 Report Share Posted August 20, 2008 hey hey,,, i want a ka24 for my 521. anyone know how much that costs? would appreciate it if you guys can give me prices and info. thanks!! Quote Link to comment
Icehouse Posted August 20, 2008 Report Share Posted August 20, 2008 You can get free blown up single cams, maybe you could go that route and rebuild it. There are some high number single cams out there. Just a thought. Quote Link to comment
ppeters914 Posted August 20, 2008 Report Share Posted August 20, 2008 You could do some research on your own. Check northwestnissans, the510realm, DQ classifieds, craigslists, evilBay, etc. No free lunch around here. Just sayin'..... Quote Link to comment
nismopu Posted August 20, 2008 Report Share Posted August 20, 2008 yeah dual cams are over rated, single scam is where its at! You can find them for as low as 50 bucks or as high as 300 bucks. Your other expenses will range in which route you want to go. peace. Quote Link to comment
Icehouse Posted August 20, 2008 Report Share Posted August 20, 2008 ^agree 100% dual cams KA's are overrated! I wouldn't mind a turbo one though :D If I was to go all motor I would personally go with the single cam. Quote Link to comment
BACARDI_DWB Posted August 20, 2008 Report Share Posted August 20, 2008 for the 521 dual cam will be a little bit of work unless you can find a newer truck motor with the dual cam. you need the rear sump pan for the ka24. the other route is the single cam out of the truck. or you can frankenstein the ka, but regardless you are going to need to have the truck oil pan. few more options -if you find the ka24de, (DOHC) then if you have welding skills you can modify the pan/oil pickup. -modify steering link and have a front sump setup. (like dgr's setup with SR20 http://forum.ratsun.net/showthread.php?t=806 ) the easiest way is to do the SOHC since its easy to come by and fits since its a rear sump. all the other ways your modifying which could lead to failure, either engine failure or steering. i would rather none of them fail. haha good luck!! Quote Link to comment
Z-train Posted August 20, 2008 Report Share Posted August 20, 2008 I have a single cam out of a truck.Complete with computer & harness.It was running when pulled.$300.00 Quote Link to comment
pl521sss Posted August 20, 2008 Report Share Posted August 20, 2008 You could do some research on your own. Check northwestnissans, the510realm, DQ classifieds, craigslists, evilBay, etc. No free lunch around here. Just sayin'..... What his saying is use the search function on those forums including here. If you haven't done that. Most people ignores that or don't want to use it including me. It will bring you a wealth of information. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.