510 wheel arch repair?

[shane_lxi]

I'm starting to dick around with my recently acquired 510 project. The previous owner was planning to run some bubble flares and unfortunately already mangled the driver's side wheel arch and tossed the scrap. Any ideas where I can get a full replacement arch for a 2 door? Another option I suppose is to chop up one of the many extra front fenders I ended up with and try to sub that as the rear arch. The downside is I would likely have to do both to make it symmetrical as I doubt they are the exact same shape as the rears. Any suggestions?

[Ranman72]

you might be able to find a rear quarter replacement but could be pricey 

check fauto fab they were doing some reproduction sheet metal but not sure if they are doing quarter panels yet 

[MicroMachinery]

Here in the states, most of us are so lazy that that much will make us go and look for a 510 in better shape(I know I would..). However, if you have some fab skills and access to a donor, then the sky's the limit.

[hobbes_the_cat]

I just chopped up a two door. It was really rusty down low but the wheel arches might be useable. Let me know if you're interested in me cutting a chunk out for ya.

[bananahamuck]

^^^ he is just a short trip away from you ,, that`s probably exactly the answer your looking for.

[shane_lxi]

Thanks! PM'd about the quarter panel, that would really help alot. Now I need a windshield and quarter glass and I've got most the parts I need!

[thisismatt]

If they're already cut, it might be a good time to put on some metal flares.  Personally, I like the stock body, and maybe you do too, but there are some cool metal flared cars that have looked pretty sweet.

[shane_lxi]

I'm not a huge fan of flares. I will if I have to, but I'd rather not, lol.