EL521 Posted October 4, 2013 Author Report Share Posted October 4, 2013 How much? Quote Link to comment
datson4life Posted October 4, 2013 Report Share Posted October 4, 2013 Free I don't need l series parts anymore Quote Link to comment
banzai510(hainz) Posted October 4, 2013 Report Share Posted October 4, 2013 L series He has a J series looks to me in this 69 521. Free is nice but he'll give it to soembody else FREE Quote Link to comment
datson4life Posted October 4, 2013 Report Share Posted October 4, 2013 that looks like an l series fuel pump Quote Link to comment
datson4life Posted October 4, 2013 Report Share Posted October 4, 2013 oohhh yup, if l series fuel pump dont work on j series, i think u have the wrong fuel pump buddy just went back a page and i see a j series engine Quote Link to comment
EL521 Posted October 6, 2013 Author Report Share Posted October 6, 2013 I think I have the right one let me upload my old and new next to each other Quote Link to comment
4perrev Posted October 7, 2013 Report Share Posted October 7, 2013 Welcome to the house. Let the parts hunt and fun begin!! It's a good ride once you get started. Quote Link to comment
Esteban Posted October 7, 2013 Report Share Posted October 7, 2013 Welcome to the 521 world! Quote Link to comment
EL521 Posted October 26, 2013 Author Report Share Posted October 26, 2013 So I just installed my fuel pump on my 521 put the orginal one had a spacer in between do you guys think I need that spacer on my new one? Quote Link to comment
EL521 Posted October 26, 2013 Author Report Share Posted October 26, 2013 I tried it with the spacer and I dont feel pressure like a plunge I try it with out the spacer and I could feel pressure like the arm pushing in also my original fuel pump is the same way. So im wondering if I need the spacer? I just installed it without the spacer and it turned on. What do you think? Thanks. Quote Link to comment
mrbigtanker Posted October 26, 2013 Report Share Posted October 26, 2013 As far as i know you need the spacer,you only need about 3-4 lbs of fuel pressure. Quote Link to comment
laotsu Posted October 26, 2013 Report Share Posted October 26, 2013 you change the travel on the mechanical arm if you remove the spacer, use the spacer. Quote Link to comment
EL521 Posted October 26, 2013 Author Report Share Posted October 26, 2013 Alright thanks im going to put the spacer back on. I just found out today my fuel lines are cloged up Quote Link to comment
mrbigtanker Posted October 27, 2013 Report Share Posted October 27, 2013 in that case flush your tank to,i have been down that road. Quote Link to comment
EL521 Posted October 27, 2013 Author Report Share Posted October 27, 2013 Okay im going to do that next weekend. Is it easy to do or pain in the ass Quote Link to comment
EL521 Posted December 6, 2013 Author Report Share Posted December 6, 2013 Anyone got for sale front bumper brakets for a 521 datsun Quote Link to comment
DanielC Posted December 6, 2013 Report Share Posted December 6, 2013 How bad are yours? They are not that hard to straighten. Quote Link to comment
datson4life Posted December 6, 2013 Report Share Posted December 6, 2013 konig209 might, and hes in your town Quote Link to comment
ggzilla Posted December 6, 2013 Report Share Posted December 6, 2013 Flushing the tank is easy. Remove the drain bolt, let it drain. Pour a gallon of clean gasoline in the filler, let it draino. Button it back up. Done. Quote Link to comment
EL521 Posted December 12, 2013 Author Report Share Posted December 12, 2013 I just got a new alternator, battery and voltage regulator and my battery dies after like 2 days. While my truck is on my ignition light comes on and off with a buz. Can anyone help? Thank you Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.